Florida Plumbing Contractor - Isometric Class (In-Person / 4 Hours)

Florida Plumbing Contractor - Isometric Class (In-Person / 4 Hours)

  • $225.00
  • Save $25
Shipping calculated at checkout.

Call to ask about financial assistance

100% safasfaction

 PLUMBING ISOMETRIC CLASS 

 

1ExamPrep has helped thousands of students master isometric drawings and pass the Florida Plumbing Contractor exam. This 4 hour in-person class makes isometric drawings easy by walking you through step-by-step detailed instructions so you can gain the skills you need to conquer isometric drawings and pass your exam.  


SPACE IS LIMITED

SELECT THE DATE AND TIME ABOVE TO RESERVE YOUR SEAT

For questions, please call: 954-210-3030

 

*Payment must be received at the time of booking in order to reserve your class seat. Class is nonrefundable.  




2024 Class Schedule:

DATE TIME LOCATION
February 9th, Friday
8:30 am - 12:30 pm SpringHill Suites Altamonte Springs, FL
February 9th, Friday
1:30 pm - 5:30 pm SpringHill Suites Altamonte Springs, FL
April 12th, Friday
8:30 am - 12:30 pm SpringHill Suites Altamonte Springs, FL
April 12th, Friday
1:30 pm - 5:30 pm SpringHill Suites Altamonte Springs, FL
June 7th, Friday
8:30 am - 12:30 pm SpringHill Suites Altamonte Springs, FL
June 7th, Friday
1:30 pm - 5:30 pm SpringHill Suites Altamonte Springs, FL
August 9th, Friday
8:30 am - 12:30 pm SpringHill Suites Altamonte Springs, FL
August 9th, Friday
1:30 pm - 5:30 pm SpringHill Suites Altamonte Springs, FL
October 11th, Friday
8:30 am - 12:30 pm SpringHill Suites Altamonte Springs, FL
October 11th, Friday
1:30 pm - 5:30 pm SpringHill Suites Altamonte Springs, FL
December 13th, Friday
8:30 am - 12:30 pm SpringHill Suites Altamonte Springs, FL
December 13th, Friday
1:30 pm - 5:30 pm SpringHill Suites Altamonte Springs, FL


Class Overview: 

  • Instructor: Jack Sheffield
  • Isometric theory overview
  • Step-by-step isometric drawing instructions 
  • The Rules of Isometric projection: An Isometric object should be drawn using vertical lines and horizontal lines. Vertical lines stay vertical but horizontal lines are drawn at a 30-degree angle to the horizontal plane. Angle between all the three axes must be 120 degrees.

 

What to Bring: 

  • Small 30-60-90 Triangle
  • Pencil

*All other materials will be provided at the class. 

 

Class Location:  

SpringHill Suites by Marriott - Altamonte Springs/Maitland

250 W State Rd 436

Altamonte Springs, FL 32714

Hotel Phone Number: (407) 865-6400



Isometric Drawing Portion of the Florida State Plumbing Exam:  

Each of the isometric drawings is worth up to a maximum of 10 points. Based on the criteria listed below, each drawing will be independently evaluated by three graders. At least two of the graders must agree that a criterion is correct in order for that criterion to be graded as correct and points to be awarded. If one or more criterion is determined to be incorrect by at least two of the graders, points will not be awarded for that criterion. The awarded points for all criteria will be summed and converted to a 10 point scale to determine the score for each drawing.

 

The following are the criteria and points used by the graders to evaluate each of the five isometric drawings.

a. Legibility. Drawing is clear and readable. Drawing is sufficient in size. Lines and labels are distinguishable. (8 points)

b. Orientation. All fixtures are shown in the correct location relative to each other. (20 points)

c. Flow. Direction of flow is shown when going from vertical to horizontal. The direction of flow must be indicated even if the direction is implied for all waste lines and all fixture connections. Direction of flow is not required for vent lines. (12 points)

d. Angles. Isometric drawing uses 30-60-90 degree angles. All angles used on the drawing are displayed at the appropriate orientation. (8 points)

e. Piping. All pipes, fittings, traps, clean-outs, and similar portions of the piping structure are included on the drawing. All piping is shown exactly as on the drawing (regardless of specific code requirements). The piping must display the correct elevation in reference to the floor plan. (20 points)

f. Labeling. All fixtures are labeled according to the legend provided in the examination instructions. (4 points)

g. Vents. All vents are properly indicated. (16 points)

h. Fixtures. All fixtures shown on the floor plan are appropriately indicated on the isometric drawing. (12 points)

 

Florida State Plumbing Exam Dates and Deadlines:  

The plumbing (trade knowledge) examinations are administered in paper and pencil format multiple times per year in Orlando only. To register for the exam visit www.floridaexam.com

EXAM DATE DEADLINE EXAM LOCATION
February 27-28, 2024 January 28, 2024 Osceola Heritage Park, Exhibition Building
April 16-17, 2024
March 17, 2024 Osceola Heritage Park, Exhibition Building
June 25-26, 2024
May 26, 2024 Osceola Heritage Park, Exhibition Building
August - TBD TBD TBD
October - TBD
TBD TBD
December - TBD
TBD TBD