{"product_id":"north-carolina-marine-construction-contractor-highlighted-tabbed-books-allowed-into-exam-package","title":"North Carolina Marine Construction Contractor Highlighted \u0026 Tabbed Books Allowed into Exam Package","description":"\u003ch1 style=\"color: #d32f2f;\"\u003eNorth Carolina Marine Construction Contractor Highlighted \u0026amp; Tabbed Books Allowed into Exam Package\u003c\/h1\u003e\n\u003cp\u003ePrepare for the North Carolina Marine Construction Contractor examination with a focused set of professionally highlighted and tabbed books allowed into the exam room. This package includes the North Carolina construction safety standards, the 2007 CAMA Handbook for Development of Coastal North Carolina, and Construction Planning, Equipment, and Methods, 10th Edition.\u003c\/p\u003e\n\u003cp\u003eThese three references support important examination topics involving coastal development, small docks, pile driving, construction planning, equipment selection, marine operations, excavation, lifting, concrete work, and jobsite safety. Each book is organized to help candidates study efficiently and develop the reference-navigation skills needed for an open-book contractor examination.\u003c\/p\u003e\n\u003cp\u003eProfessional highlighting draws attention to important requirements, definitions, procedures, tables, equipment concepts, coastal-development provisions, and safety standards. Permanent subject tabs divide major sections and commonly reviewed topics so candidates can move through the books with less unnecessary page turning.\u003c\/p\u003e\n\u003cp\u003eMarine construction work may involve deep-water installations, harbors, inlets, sounds, bays, channels, lakes, canals, ponds, and other navigable waters. Projects can include dredging, pile installation, piers, docks, decks, slips, bulkheads, and related construction activities. Contractors must understand both the physical construction process and the regulatory or safety responsibilities connected with working around water.\u003c\/p\u003e\n\u003cp\u003eThe North Carolina Marine Construction examination includes questions covering CAMA-regulated areas, small docks, pile driving, concrete, concrete reinforcement, safety, laws and regulations, liens, and erosion and sedimentation control. The books in this package provide direct exam-room support for several of these subjects, while separate preparation may be needed for topics addressed by references that are not permitted in the testing center.\u003c\/p\u003e\n\u003cp\u003eOpen-book testing requires preparation before exam day. Candidates must recognize the subject being tested, decide which reference applies, locate the relevant section, and interpret the information within the available time. Working with the same highlighted and tabbed books throughout your preparation can help make reference navigation more familiar and consistent.\u003c\/p\u003e\n\u003cdiv style=\"border: 3px solid #d32f2f; padding: 20px; margin: 25px 0; background-color: #fff7f7;\"\u003e\n\u003ch2 style=\"color: #d32f2f; margin-top: 0;\"\u003eWhat You Get\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree Exam-Room References:\u003c\/strong\u003e Includes the three listed publications prepared for use during the North Carolina Marine Construction Contractor examination.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfessional Highlighting:\u003c\/strong\u003e Important coastal-development information, safety provisions, equipment concepts, procedures, tables, and definitions are marked for focused review.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePermanent Subject Tabs:\u003c\/strong\u003e Major chapters and commonly reviewed topics are divided to support faster navigation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarine-Construction Coverage:\u003c\/strong\u003e Supports preparation involving docks, pile driving, coastal regulations, equipment, planning, excavation, concrete operations, lifting, and construction safety.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpen-Book Study Support:\u003c\/strong\u003e Candidates can practice with the same organized references they plan to bring to the examination center.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003eThe highlighting and tabs are designed to improve organization and book familiarity. They do not replace reading the references, studying the complete examination outline, or practicing under timed conditions.\u003c\/p\u003e\n\u003ch2 style=\"color: #d32f2f;\"\u003eExam Details\u003c\/h2\u003e\n\u003cp\u003eThe North Carolina Marine Construction examination is administered by PSI for the North Carolina Licensing Board for General Contractors. The Board determines examination eligibility, and approved candidates receive instructions for registration and scheduling.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eExamination:\u003c\/strong\u003e North Carolina Marine Construction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTesting Provider:\u003c\/strong\u003e PSI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Questions:\u003c\/strong\u003e 50\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTime Allowed:\u003c\/strong\u003e 120 minutes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRequired Passing Score:\u003c\/strong\u003e 70%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTesting Format:\u003c\/strong\u003e Computer-administered examination\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReference Format:\u003c\/strong\u003e Open book with approved materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe published examination outline assigns seven questions to CAMA-regulated areas and seven questions to small docks. Pile driving is the largest subject area, with 12 questions. Concrete and concrete reinforcement each account for seven questions, while safety accounts for five questions.\u003c\/p\u003e\n\u003cp\u003eThe remaining examination areas include two questions on laws and regulations, one question on liens, and two questions on erosion and sedimentation control. Candidates should prepare for the entire outline because every subject contributes to the final score.\u003c\/p\u003e\n\u003cp\u003ePile-driving preparation should include equipment, pile types, handling, layout, driving methods, leads, hammers, driving resistance, alignment, cutoffs, underwater conditions, and safe operation. Candidates should also review construction planning, production, lifting, marine equipment, cranes, excavation, and methods used to support work performed from barges or waterfront sites.\u003c\/p\u003e\n\u003cp\u003eCAMA-related preparation should include coastal development terminology, regulated areas, permitting concepts, Areas of Environmental Concern, docks, piers, shoreline development, estuarine waters, public trust areas, coastal shorelines, and other provisions addressed by the handbook.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAllow up to 15 business days for preparation.\u003c\/strong\u003e This preparation period is separate from shipping transit time and allows the books to be professionally highlighted, tabbed, and organized before fulfillment.\u003c\/p\u003e\n\u003ch2 style=\"color: #d32f2f;\"\u003eOpen Book Test\u003c\/h2\u003e\n\u003cp\u003eThe North Carolina Marine Construction Contractor examination is an open-book test. Candidates are responsible for bringing their own approved reference materials to the testing center.\u003c\/p\u003e\n\u003cp\u003eThe books may be highlighted, underlined, and indexed before the examination. Permanent tabs may be used when they remain securely attached and are not easily removable. Notes may not be written on the tabs. Temporary page flags, removable tabs, loose papers, attached notes, and unauthorized inserts are not permitted.\u003c\/p\u003e\n\u003cp\u003eThe CAMA Handbook for Development of Coastal North Carolina must be complete and properly bound for testing. A complete copy may be spiral-bound or hole-punched and placed in a binder. Partial copies are not accepted as exam-room references.\u003c\/p\u003e\n\u003cp\u003eReferences may not contain handwritten notes, and candidates may not write in the books during the examination. Before arriving at the testing center, inspect each publication and remove any material that does not comply with the current rules.\u003c\/p\u003e\n\u003cp\u003eWith 50 questions and 120 minutes, candidates have an average of approximately two minutes and twenty-four seconds per question. This time includes reading the question, identifying the subject, selecting the correct book, locating the applicable information, interpreting the material, and choosing an answer.\u003c\/p\u003e\n\u003cp\u003eUse the CAMA handbook for questions involving regulated coastal areas, permits, shoreline development, docks, piers, and other coastal-management subjects. Use Construction Planning, Equipment, and Methods for equipment selection, pile-driving methods, productivity, planning, excavation, lifting, and related construction operations. Use the North Carolina safety standards for questions involving worker protection, marine operations, cranes, excavation, fall protection, personal protective equipment, and other jobsite hazards.\u003c\/p\u003e\n\u003ch2 style=\"color: #d32f2f;\"\u003eLicensing Steps\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eReview the classification scope.\u003c\/strong\u003e Confirm that the Marine and Freshwater Construction classification corresponds with the work the applicant or business intends to perform.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete the contractor license application.\u003c\/strong\u003e Submit the requested information to the North Carolina Licensing Board for General Contractors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIdentify the qualifier.\u003c\/strong\u003e Designate the individual who will satisfy the examination requirement for the classification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelect the appropriate license limitation.\u003c\/strong\u003e Choose the limitation that matches the size and scope of the projects the business expects to undertake.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProvide supporting documentation.\u003c\/strong\u003e Submit the organizational, financial, qualifier, and other information required by the Board.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReceive examination eligibility.\u003c\/strong\u003e Approved candidates receive the information needed to register and schedule the examination.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrepare for the full examination outline.\u003c\/strong\u003e Study marine construction, pile driving, CAMA requirements, docks, concrete, reinforcement, safety, laws, liens, and sedimentation control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePractice with the approved books.\u003c\/strong\u003e Use the highlighted and tabbed references for timed searches and topic-based review.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTake the examination.\u003c\/strong\u003e Bring the required identification and only the books and materials permitted by the current testing rules.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete remaining licensing requirements.\u003c\/strong\u003e Follow the Board’s instructions concerning examination results, application completion, and license issuance.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003ePassing the examination is one part of the licensing process. It does not automatically issue a North Carolina contractor license. The Board must approve the complete application and confirm that all applicable requirements have been satisfied.\u003c\/p\u003e\n\u003ch2 style=\"color: #d32f2f;\"\u003eState Requirements\u003c\/h2\u003e\n\u003cp\u003eThe North Carolina Marine and Freshwater Construction classification covers marine construction and repair work performed in deep-water installations, harbors, inlets, sounds, bays, channels, canals, lakes, ponds, and other navigable waterways.\u003c\/p\u003e\n\u003cp\u003eThe classification includes dredging and the construction or installation of pilings, piers, decks, slips, docks, and bulkheads. Structures placed on top of docks, slips, or piers may fall outside the classification and may require another contractor classification.\u003c\/p\u003e\n\u003cp\u003eApplicants must identify a qualifier who satisfies the examination requirement connected with the classification. The license is issued to the approved individual or business entity after the Board completes its review.\u003c\/p\u003e\n\u003cp\u003eNorth Carolina contractor licenses are issued under limitations that affect the value of projects a licensee may undertake. Applicants should select the limitation that matches their intended work and provide the financial or bonding information required for that limitation.\u003c\/p\u003e\n\u003cp\u003eMarine contractors must also understand responsibilities involving coastal permits, environmental protection, erosion control, worker safety, navigation, equipment operation, lifting, underwater conditions, and coordination with other trades or agencies.\u003c\/p\u003e\n\u003ch2 style=\"color: #d32f2f;\"\u003eReference Books\u003c\/h2\u003e\n\u003cp\u003eThis highlighted and tabbed exam-room package includes the following three references:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNorth Carolina Occupational Safety and Health Standards for the Construction Industry, with Latest Available Amendments\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eThis publication contains construction safety requirements applicable to marine and waterfront projects. Important subjects include personal protective equipment, fall protection, cranes and derricks, material handling, excavation, scaffolds, ladders, concrete operations, electrical hazards, confined spaces, commercial diving, marine operations, and worker access around water.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCAMA Handbook for Development of Coastal North Carolina, 2007\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eThis handbook explains development considerations under the North Carolina Coastal Area Management Act. It supports preparation involving Areas of Environmental Concern, coastal shorelines, estuarine waters, public trust areas, ocean hazard areas, permits, docks, piers, shoreline stabilization, and development in regulated coastal locations.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction Planning, Equipment, and Methods, 10th Edition\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eThis technical reference covers construction planning, equipment selection, productivity, earthmoving, excavation, hauling, lifting, cranes, pile driving, concrete operations, scheduling, cost considerations, and construction methods. It supports preparation for equipment-intensive marine work and pile-driving questions.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEach book serves a different purpose. The safety standards address worker protection and hazardous conditions. The CAMA handbook addresses regulated coastal development. Construction Planning, Equipment, and Methods supports questions involving pile driving, equipment, planning, and field operations.\u003c\/p\u003e\n\u003cp\u003eLearn which reference applies to each examination topic. Efficient candidates do not search all three books for every question. They identify the subject first and then move directly to the most likely source.\u003c\/p\u003e\n\u003ch2 style=\"color: #d32f2f;\"\u003eExam Room Approved Books\u003c\/h2\u003e\n\u003cp\u003eThe following highlighted and tabbed references are included for use in the North Carolina Marine Construction Contractor examination room:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eNorth Carolina Occupational Safety and Health Standards for the Construction Industry, with Latest Available Amendments\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCAMA Handbook for Development of Coastal North Carolina, 2007\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eConstruction Planning, Equipment, and Methods, 10th Edition\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe testing bulletin identifies an earlier edition of Construction Planning, Equipment, and Methods and permits later editions of non-code references. This package includes the 10th Edition specified for the product.\u003c\/p\u003e\n\u003cp\u003eThis package contains only the three books designated for exam-room use. Additional study materials may still be useful for concrete mixtures, reinforcing steel, sedimentation control, contractor laws, liens, and dock construction, but those separate references are not included in this package.\u003c\/p\u003e\n\u003cp\u003eTesting-center personnel make the final determination regarding the acceptability of books presented on exam day. Candidates should inspect the references before the appointment and remove loose papers, removable flags, handwritten notes, unauthorized attachments, or incomplete material.\u003c\/p\u003e\n\u003ch2 style=\"color: #d32f2f;\"\u003eTest Information and Study Materials\u003c\/h2\u003e\n\u003cp\u003eBegin with pile driving because it is the largest examination category. Study pile materials, equipment, hammers, leads, driving systems, handling, positioning, alignment, splicing, cutoffs, penetration, refusal, bearing considerations, and inspection. Understand the role of cranes, barges, templates, rigging, and support equipment.\u003c\/p\u003e\n\u003cp\u003eFor small docks, review layout, pilings, framing, decking, access, slips, shoreline connections, water depth, structural support, and construction sequencing. Connect practical dock construction knowledge with the coastal-development provisions found in the CAMA handbook.\u003c\/p\u003e\n\u003cp\u003eFor CAMA-regulated areas, learn how Areas of Environmental Concern affect development. Review the terminology used for coastal shorelines, estuarine waters, public trust areas, ocean hazard areas, permits, setbacks, docks, piers, and shoreline projects.\u003c\/p\u003e\n\u003cp\u003eConcrete and concrete reinforcement together represent 14 questions. Separate study should address concrete materials, placement, consolidation, curing, durability, reinforcing-bar placement, supports, spacing, splices, development, cover, and marine exposure. Concrete used in waterfront environments may face wet conditions, salt exposure, access limitations, and placement challenges.\u003c\/p\u003e\n\u003cp\u003eSafety preparation should include working over or near water, fall hazards, personal flotation devices, cranes, rigging, pile-driving equipment, suspended loads, heavy machinery, electrical exposure, excavation, ladders, scaffolds, and personal protective equipment.\u003c\/p\u003e\n\u003cp\u003eUse timed reference-navigation sessions. Choose a subject, decide which book applies, locate the relevant chapter, and confirm the answer. Repeat difficult searches until the organization of each publication becomes familiar.\u003c\/p\u003e\n\u003cp\u003eDo not rely exclusively on highlighted passages. Read nearby definitions, tables, exceptions, illustrations, and conditions. A highlighted rule may depend on surrounding language that affects how it applies to a particular question.\u003c\/p\u003e\n\u003ch2 style=\"color: #d32f2f;\"\u003eHow 1 Exam Prep Helps You Reach Your Goal\u003c\/h2\u003e\n\u003cp\u003e1 Exam Prep helps North Carolina Marine Construction Contractor candidates turn an exam-room book list into an organized preparation system. This package provides the three permitted references professionally highlighted and tabbed for focused review.\u003c\/p\u003e\n\u003cp\u003eProfessional highlighting draws attention to important coastal-development provisions, construction methods, equipment concepts, safety requirements, definitions, and tables. Permanent tabs create convenient navigation points for major chapters and frequently reviewed topics.\u003c\/p\u003e\n\u003cp\u003eThe package supports trade-focused study involving CAMA-regulated areas, docks, pile driving, construction equipment, marine operations, lifting, excavation, concrete work, and jobsite safety. Candidates can use the organized references to connect examination terminology with the correct book and section.\u003c\/p\u003e\n\u003cp\u003e1 Exam Prep encourages practice-oriented preparation. Working directly with the books, reviewing trade concepts, and completing timed reference searches can help candidates build a repeatable process for approaching open-book questions.\u003c\/p\u003e\n\u003cp\u003eNo book package guarantees a passing score, application approval, or contractor license. Results depend on the candidate’s knowledge, experience, preparation, reference familiarity, and performance during the examination.\u003c\/p\u003e\n\u003ch2 style=\"color: #d32f2f;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch2 style=\"color: #d32f2f;\"\u003eIs the North Carolina Marine Construction examination open book?\u003c\/h2\u003e\n\u003cp\u003eYes. The examination is open book, and candidates may bring approved references that comply with current testing-center rules.\u003c\/p\u003e\n\u003ch2 style=\"color: #d32f2f;\"\u003eHow many books are included in this package?\u003c\/h2\u003e\n\u003cp\u003eThe package includes three professionally highlighted and tabbed references.\u003c\/p\u003e\n\u003ch2 style=\"color: #d32f2f;\"\u003eWhich books are included?\u003c\/h2\u003e\n\u003cp\u003eThe package includes the North Carolina construction safety standards, the 2007 CAMA Handbook for Development of Coastal North Carolina, and Construction Planning, Equipment, and Methods, 10th Edition.\u003c\/p\u003e\n\u003ch2 style=\"color: #d32f2f;\"\u003eAre all three books allowed into the exam room?\u003c\/h2\u003e\n\u003cp\u003eYes. This package is limited to the three listed references prepared for use during the North Carolina Marine Construction Contractor examination.\u003c\/p\u003e\n\u003ch2 style=\"color: #d32f2f;\"\u003eAre the books highlighted and tabbed?\u003c\/h2\u003e\n\u003cp\u003eYes. The references are professionally highlighted and fitted with permanent subject tabs to support organized study and faster navigation.\u003c\/p\u003e\n\u003ch2 style=\"color: #d32f2f;\"\u003eHow many questions are on the examination?\u003c\/h2\u003e\n\u003cp\u003eThe North Carolina Marine Construction examination contains 50 questions.\u003c\/p\u003e\n\u003ch2 style=\"color: #d32f2f;\"\u003eHow much time is allowed?\u003c\/h2\u003e\n\u003cp\u003eCandidates are allowed 120 minutes to complete the examination.\u003c\/p\u003e\n\u003ch2 style=\"color: #d32f2f;\"\u003eWhat score is required to pass?\u003c\/h2\u003e\n\u003cp\u003eThe required passing score is 70%.\u003c\/p\u003e\n\u003ch2 style=\"color: #d32f2f;\"\u003eDoes the CAMA handbook need to be bound?\u003c\/h2\u003e\n\u003cp\u003eYes. The complete CAMA handbook must be properly bound. It may be spiral-bound or hole-punched and placed in a binder. Partial copies are not accepted.\u003c\/p\u003e\n\u003ch2 style=\"color: #d32f2f;\"\u003eDoes this package include study books that are not allowed into the exam?\u003c\/h2\u003e\n\u003cp\u003eNo. This package contains only the three listed exam-room references. Separate study materials may be needed for concrete, reinforcement, laws, liens, dock construction, and sedimentation control.\u003c\/p\u003e\n\u003ch2 style=\"color: #d32f2f;\"\u003eHow long does package preparation take?\u003c\/h2\u003e\n\u003cp\u003eAllow up to 15 business days for preparation. Shipping transit time is separate from the preparation period.\u003c\/p\u003e\n\u003ch2 style=\"color: #d32f2f;\"\u003eDoes passing the examination automatically issue a contractor license?\u003c\/h2\u003e\n\u003cp\u003eNo. Passing the examination is one part of the licensing process. The North Carolina Licensing Board for General Contractors must approve the complete application and confirm that all applicable requirements have been satisfied.\u003c\/p\u003e\n\u003ch2 style=\"color: #d32f2f;\"\u003eDoes this package guarantee a passing score?\u003c\/h2\u003e\n\u003cp\u003eNo. The package provides organized exam-room references, but examination results depend on the candidate’s preparation, knowledge, experience, reference-navigation skills, and performance.\u003c\/p\u003e","brand":"1 Exam Prep","offers":[{"title":"Highlighted \u0026 Tabbed Book Package","offer_id":46204067938361,"sku":null,"price":595.0,"currency_code":"USD","in_stock":true},{"title":"Highlighted \u0026 Tabbed Books + Online Self Study Course [+$295]","offer_id":46204067971129,"sku":null,"price":890.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1789\/0861\/files\/MarineConstructionContractor-HTEO.jpg?v=1784581848","url":"https:\/\/1examprep.com\/products\/north-carolina-marine-construction-contractor-highlighted-tabbed-books-allowed-into-exam-package","provider":"1 Exam Prep","version":"1.0","type":"link"}