{"product_id":"ohio-commercial-mechanical-inspector-icc-m2-highlighted-tabbed-book-package","title":"Ohio Commercial Mechanical Inspector (ICC - M2) Highlighted \u0026 Tabbed Book Package","description":"\u003ch1 style=\"color: #d32f2f;\"\u003eOhio Commercial Mechanical Inspector (ICC - M2) Highlighted \u0026amp; Tabbed Book Package\u003c\/h1\u003e\n\u003cp\u003eThe Ohio Commercial Mechanical Inspector (ICC - M2) Highlighted \u0026amp; Tabbed Book Package is designed for candidates preparing for the ICC Commercial Mechanical Inspector exam using the 2021 code references. This package includes the International Mechanical Code, 2021 and the International Fuel Gas Code, 2021, prepared as a highlighted and tabbed book package to support faster code navigation during study and exam preparation.\u003c\/p\u003e\n\u003cp\u003eCommercial mechanical inspection requires a working knowledge of mechanical systems, fuel gas systems, equipment installation, ventilation, exhaust, combustion air, duct systems, chimneys, vents, piping, appliances, and commercial code compliance. The ICC M2 exam measures how well a candidate can locate, interpret, and apply mechanical code requirements to inspection-based situations. A strong study plan begins with the correct references and a practical strategy for using them efficiently.\u003c\/p\u003e\n\u003cp\u003eThis highlighted and tabbed book package gives Ohio candidates the two main references used for the 2021 ICC Commercial Mechanical Inspector exam. The International Mechanical Code, 2021 is the primary reference for commercial mechanical systems, including mechanical equipment, heating and cooling systems, ventilation, exhaust systems, duct systems, combustion air, refrigeration, hydronic systems, chimneys, vents, and general mechanical requirements. The International Fuel Gas Code, 2021 supports study of gas piping systems, fuel-burning appliances, combustion air, venting, chimneys, gas pipe sizing, appliance connections, and fuel gas safety requirements.\u003c\/p\u003e\n\u003cp\u003eThe highlighted and tabbed format is especially useful for open-book exam preparation. Candidates must be able to move quickly through the code books, identify the right chapter, locate the applicable section, and apply the requirement to the question being asked. Highlighting and tabs help organize major code areas so candidates can spend less time searching and more time answering. The value of this package is not just owning the books, but studying with references that are easier to navigate during preparation.\u003c\/p\u003e\n\u003cp\u003eFor Ohio candidates pursuing commercial mechanical inspection responsibilities, the ICC M2 exam may support a broader professional path involving building department work, mechanical inspection, municipal code enforcement, commercial construction review, or building department personnel certification. ICC administers the Commercial Mechanical Inspector exam, while Ohio certification, employment authority, and building department requirements are handled through Ohio’s building standards framework. This product focuses on the highlighted and tabbed exam book package used for ICC M2 preparation.\u003c\/p\u003e\n\u003cp\u003eThe ICC Commercial Mechanical Inspector exam is code based. Many questions are written as real inspection scenarios. A question may describe a commercial rooftop unit, duct installation, exhaust system, mechanical room, appliance installation, combustion air condition, fuel gas piping layout, vent connector, chimney, or equipment access issue. The candidate must determine which code provision applies and select the answer that best matches the requirement. Because the exam is timed, knowing where to find information quickly is one of the most important parts of preparation.\u003c\/p\u003e\n\u003ch2 style=\"color: #d32f2f;\"\u003eWhat You Get\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHighlighted \u0026amp; Tabbed International Mechanical Code, 2021\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eThe primary commercial mechanical code reference for the ICC M2 exam, prepared with highlighting and tabs to support organized study and faster navigation through important mechanical code sections.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHighlighted \u0026amp; Tabbed International Fuel Gas Code, 2021\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eThe fuel gas code reference for gas piping, gas appliances, combustion air, venting, chimneys, and related fuel gas provisions, prepared with highlighting and tabs to support efficient code lookup during study.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"color: #d32f2f;\"\u003eExam Details\u003c\/h2\u003e\n\u003cp\u003eThe ICC Commercial Mechanical Inspector (M2) exam is a certification exam for candidates who inspect commercial mechanical systems for code compliance. The exam measures the ability to apply the International Mechanical Code and International Fuel Gas Code to commercial mechanical inspection situations. Candidates should be prepared to evaluate installed conditions, identify code requirements, and determine whether mechanical and fuel gas systems meet applicable provisions.\u003c\/p\u003e\n\u003cp\u003eThe exam commonly includes 50 multiple-choice questions with a 2-hour time limit. The exam is open book and requires candidates to locate code provisions quickly and accurately. Candidates preparing for the 2021 exam version should study from the International Mechanical Code, 2021 and the International Fuel Gas Code, 2021.\u003c\/p\u003e\n\u003cp\u003eMajor study areas include general administration, heating equipment, cooling equipment, water heaters, exhaust systems, ventilation systems, duct systems, combustion air, chimneys, vents, fuel supply systems, refrigeration, hydronic piping, and appliance installation requirements. Candidates should also understand how mechanical systems are inspected in commercial buildings and how code requirements apply to actual field conditions.\u003c\/p\u003e\n\u003cp\u003eGeneral administration questions may involve permits, inspections, approved materials, construction documents, equipment approval, alternative materials and methods, unsafe conditions, and the responsibilities connected to code enforcement. Candidates should understand how the code establishes the inspection framework and how commercial mechanical work is evaluated for compliance.\u003c\/p\u003e\n\u003cp\u003eHeating and cooling equipment questions may involve equipment installation, access, clearances, location, supports, condensate disposal, duct connections, combustion air where applicable, and manufacturer’s installation instructions. Candidates should study how the mechanical code addresses equipment installation and how inspectors verify that equipment is installed safely and accessibly.\u003c\/p\u003e\n\u003cp\u003eVentilation questions may involve outdoor air requirements, ventilation rates, ventilation system design, air distribution, mechanical ventilation, natural ventilation where applicable, and the relationship between ventilation and occupancy. Candidates should be comfortable finding ventilation provisions and applying them to commercial spaces described in exam questions.\u003c\/p\u003e\n\u003cp\u003eExhaust system questions may involve commercial kitchen exhaust, environmental exhaust, clothes dryer exhaust, domestic kitchen exhaust where applicable, bathroom and toilet room exhaust, hazardous exhaust, exhaust discharge locations, duct construction, and equipment requirements. Exhaust questions often require careful reading because different types of exhaust systems have different code requirements.\u003c\/p\u003e\n\u003cp\u003eDuct system questions may involve duct construction, duct installation, support, insulation, sealing, fire and smoke dampers, plenums, return air, air distribution, access openings, and prohibited materials or locations. Mechanical inspectors must be able to recognize whether duct systems are installed in a code-compliant manner and whether the correct section applies to the condition described.\u003c\/p\u003e\n\u003cp\u003eCombustion air questions may involve indoor combustion air, outdoor combustion air, mechanical combustion air, openings, ducts, appliance spaces, confined spaces, and fuel-burning equipment. Candidates should study combustion air provisions carefully because these questions often require both code navigation and accurate interpretation of the installation condition.\u003c\/p\u003e\n\u003cp\u003eChimney and vent questions may involve vent connectors, appliance venting, chimney materials, sizing, termination, clearance, support, common venting, draft, and appliance categories. These topics may require use of both the International Mechanical Code and the International Fuel Gas Code depending on the question.\u003c\/p\u003e\n\u003cp\u003eFuel gas questions may involve gas piping materials, pipe sizing, gas appliance connections, shutoff valves, sediment traps, pressure testing, combustion air, venting, and appliance installation. The International Fuel Gas Code, 2021 is an important part of M2 preparation because many commercial mechanical systems include fuel-burning appliances and gas piping components.\u003c\/p\u003e\n\u003ch2 style=\"color: #d32f2f;\"\u003eOpen Book Test\u003c\/h2\u003e\n\u003cp\u003eThe ICC Commercial Mechanical Inspector (M2) exam is an open-book exam. Open book testing allows candidates to use approved references during the exam, but it still requires strong preparation. Candidates must know where major code topics are located, how the references are organized, and how to apply code provisions accurately within the time allowed.\u003c\/p\u003e\n\u003cp\u003eFor the 2021 exam version, candidates should prepare with the International Mechanical Code, 2021 and the International Fuel Gas Code, 2021. This highlighted and tabbed package supports open-book preparation by making important sections easier to locate during study. Candidates should still practice using the books regularly so the tabs and highlighted areas become familiar tools rather than something new on exam day.\u003c\/p\u003e\n\u003cp\u003eA strong open-book strategy begins with the table of contents and index in each book. Candidates should know where to find general regulations, ventilation, exhaust systems, duct systems, combustion air, chimneys, vents, refrigeration, hydronic piping, fuel gas piping, gas appliances, and appliance venting. The more familiar the book structure becomes, the easier it is to move from a question to the correct code section.\u003c\/p\u003e\n\u003cp\u003eHighlighting and tabs can help candidates organize their study around high-use code areas. Tabs may help identify major chapters and topics, while highlighting may draw attention to important code language, tables, definitions, exceptions, or inspection-related provisions. Candidates should use the highlighted and tabbed references actively during practice, not just read through them passively.\u003c\/p\u003e\n\u003cp\u003eOpen-book success depends on speed and accuracy. During the exam, candidates must read the question, identify the subject, locate the controlling code section, apply the requirement, and choose the best answer. Slow page-by-page searching can waste valuable time. A better approach is to practice moving from the keywords in the question to the correct tab, chapter, section, or index entry before exam day.\u003c\/p\u003e\n\u003ch2 style=\"color: #d32f2f;\"\u003eLicensing Steps\u003c\/h2\u003e\n\u003cp\u003eCandidates preparing for the ICC Commercial Mechanical Inspector (M2) exam typically begin by confirming the correct exam and code year through ICC, obtaining the required references, reviewing the exam content outline, and creating a study schedule. The exam is purchased and scheduled through ICC using the candidate’s myICC account.\u003c\/p\u003e\n\u003cp\u003eAfter selecting the M2 exam, candidates follow ICC scheduling and testing procedures. Testing may be available through approved computer-based testing options or remote proctored testing when offered for the exam. Candidates should review ICC policies for identification, approved references, book preparation, calculators, scheduling, retesting, and exam-day conduct before the test date.\u003c\/p\u003e\n\u003cp\u003eFor Ohio candidates, passing the ICC M2 exam may support a larger professional goal involving commercial mechanical inspection, building department employment, municipal code enforcement, mechanical code review, or building department personnel certification. The ICC exam is an exam credential, while Ohio certification, employment authority, and building department recognition are handled through the applicable Ohio process.\u003c\/p\u003e\n\u003cp\u003eA practical preparation path includes obtaining the highlighted and tabbed books in this package, reviewing the ICC M2 content areas, learning the structure of both references, studying one subject at a time, practicing timed code lookup, and completing mechanical inspection practice questions. Candidates should keep records of passing exam results for employer, building department, or state certification use as applicable.\u003c\/p\u003e\n\u003cp\u003ePassing the ICC M2 exam does not replace any separate Ohio application, experience requirement, employer requirement, building department appointment, or state certification process. Candidates should pair exam preparation with the Ohio building standards pathway that applies to their intended role.\u003c\/p\u003e\n\u003ch2 style=\"color: #d32f2f;\"\u003eState Requirements\u003c\/h2\u003e\n\u003cp\u003eOhio commercial mechanical inspection work is connected to Ohio’s building code and building department certification structure. Candidates pursuing commercial mechanical inspector responsibilities in Ohio should understand the difference between an ICC certification exam and Ohio’s state-level requirements for building department personnel.\u003c\/p\u003e\n\u003cp\u003eThe ICC Commercial Mechanical Inspector (M2) exam supports commercial mechanical inspection knowledge. Ohio certification, employment authority, and building department recognition are handled separately through the applicable Ohio process. Depending on the position and certification path, a candidate may need to meet state, employer, or department requirements in addition to passing an ICC exam.\u003c\/p\u003e\n\u003cp\u003eThis highlighted and tabbed book package supports the exam preparation portion by providing the listed 2021 references in an organized study format. It does not replace an Ohio application, work experience requirement, employer requirement, building department appointment, or state certification process. Candidates working toward an Ohio credential should pair exam study with the applicable Ohio certification steps for their role.\u003c\/p\u003e\n\u003cp\u003eFor candidates working in commercial construction, HVAC, mechanical inspection, fuel gas work, code enforcement, maintenance, design review, municipal inspection, or building department operations, the ICC M2 exam can help document knowledge of commercial mechanical inspection. The same subject areas tested on the exam also appear in practical inspection work, including equipment installation, duct systems, ventilation, exhaust, combustion air, chimneys, vents, fuel gas piping, and appliance safety.\u003c\/p\u003e\n\u003ch2 style=\"color: #d32f2f;\"\u003eReference Books\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternational Mechanical Code, 2021\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eThe primary reference for the ICC Commercial Mechanical Inspector (M2) exam. It covers commercial mechanical requirements for equipment installation, ventilation, exhaust systems, duct systems, combustion air, chimneys, vents, refrigeration, hydronic systems, fuel oil piping, and general mechanical code compliance.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternational Fuel Gas Code, 2021\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eThe fuel gas reference used for gas piping systems, gas appliances, combustion air, appliance venting, chimneys, gas pipe sizing, shutoff valves, testing, appliance connections, and fuel gas provisions that support commercial mechanical inspection.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"color: #d32f2f;\"\u003eTest Information and Study Materials\u003c\/h2\u003e\n\u003cp\u003eThe ICC M2 exam should be studied as a commercial mechanical inspection exam. Candidates should practice evaluating the types of mechanical and fuel gas conditions found in commercial buildings, including mechanical equipment, duct systems, exhaust systems, ventilation systems, fuel-burning appliances, combustion air openings, gas piping, appliance venting, chimneys, refrigeration systems, and hydronic piping.\u003c\/p\u003e\n\u003cp\u003eStart with the International Mechanical Code, 2021. Review the table of contents and locate the chapters that address general regulations, ventilation, exhaust, duct systems, combustion air, chimneys, vents, refrigeration, hydronic piping, and related mechanical systems. Candidates who know the chapter layout have a major advantage during timed testing because they can move directly to the correct section instead of searching randomly.\u003c\/p\u003e\n\u003cp\u003eNext, review the International Fuel Gas Code, 2021. Become familiar with the chapters covering general regulations, gas piping installations, chimneys and vents, specific appliances, and related fuel gas provisions. Fuel gas topics can appear in inspection questions involving appliances, piping, combustion air, venting, shutoff valves, sediment traps, testing, or installation conditions.\u003c\/p\u003e\n\u003cp\u003eGeneral mechanical preparation should include equipment access, installation requirements, appliance approval, clearances, supports, protection from damage, equipment location, condensate disposal, manufacturer’s instructions, and general code compliance. These provisions often appear in practical inspection questions because inspectors must evaluate whether equipment is installed safely and accessibly.\u003c\/p\u003e\n\u003cp\u003eVentilation preparation should include outdoor air, mechanical ventilation, natural ventilation where applicable, exhaust relationship, air distribution, and ventilation requirements for commercial spaces. Candidates should practice finding the correct ventilation provisions and understanding how the code applies them to different types of occupancies or spaces.\u003c\/p\u003e\n\u003cp\u003eExhaust system preparation should include environmental exhaust, commercial kitchen exhaust, domestic exhaust where applicable, clothes dryer exhaust, toilet room exhaust, hazardous exhaust, duct materials, exhaust discharge, termination locations, and equipment requirements. Exhaust topics require careful attention to system type because different exhaust applications follow different rules.\u003c\/p\u003e\n\u003cp\u003eDuct system preparation should include duct construction, duct installation, supports, sealing, insulation, plenums, return air, fire dampers, smoke dampers, access openings, and protection requirements. Candidates should understand how duct requirements are organized and how to identify whether a question is asking about construction, location, material, or fire and smoke protection.\u003c\/p\u003e\n\u003cp\u003eCombustion air preparation should include confined spaces, indoor air, outdoor air, mechanical air, combustion air openings, ducts, equipment rooms, and appliance spaces. These questions often require careful reading because the size, location, and arrangement of openings can determine the correct answer.\u003c\/p\u003e\n\u003cp\u003eChimney and vent preparation should include vent connectors, appliance venting, common venting, vent materials, termination, support, clearance, draft, and appliance category requirements. Candidates should practice moving between the International Mechanical Code and International Fuel Gas Code when a question involves fuel-burning equipment.\u003c\/p\u003e\n\u003cp\u003eFuel gas preparation should include gas pipe sizing, pipe materials, fittings, valves, appliance connectors, sediment traps, pressure testing, shutoff valves, gas appliance installation, combustion air, and venting. The International Fuel Gas Code is a detailed reference, and repeated lookup practice helps candidates become comfortable finding the correct sections quickly.\u003c\/p\u003e\n\u003cp\u003eThe highlighted and tabbed format supports active study. Candidates should use the tabs to move to major topics, then read the highlighted sections carefully and connect them to practice questions. Highlighting can help draw attention to high-value code language, but candidates should still read the full section and any exceptions that apply. Many exam questions turn on exact wording, exceptions, or conditions described in the code.\u003c\/p\u003e\n\u003cp\u003eTimed code lookup practice is essential. Begin by working slowly and focusing on accuracy. Read the question, identify the subject, locate the chapter or tab, review the applicable section, and answer directly from the code. After the book structure becomes familiar, begin timing practice sessions. The goal is to find answers efficiently while still reading the question and code language carefully.\u003c\/p\u003e\n\u003cp\u003eA strong weekly study routine might include one session on general regulations and equipment installation, one on ventilation, one on exhaust systems, one on duct systems, one on combustion air, one on chimneys and vents, and one on fuel gas piping and appliances. Mixed review is important because the actual exam moves between topics rather than staying in one chapter.\u003c\/p\u003e\n\u003ch2 style=\"color: #d32f2f;\"\u003eHow 1 Exam Prep Helps You Reach Your Goal\u003c\/h2\u003e\n\u003cp\u003e1 Exam Prep helps students prepare for licensing and certification exams with organized study guidance, trade-focused review, practice-oriented preparation, reference navigation, and confidence-building study structure. For the Ohio Commercial Mechanical Inspector (ICC - M2) exam, preparation should focus on code navigation, mechanical inspection concepts, fuel gas requirements, ventilation, exhaust, duct systems, combustion air, and the ability to apply code provisions to real inspection scenarios.\u003c\/p\u003e\n\u003cp\u003eMany candidates preparing for the M2 exam already have experience in HVAC, mechanical work, construction, inspection, maintenance, design, or code enforcement. That experience is valuable, but the exam requires answers based on the code. 1 Exam Prep helps students focus on the reference books, the exam topics, and the lookup habits needed for an open-book certification exam.\u003c\/p\u003e\n\u003cp\u003eUsing the correct books is the foundation. The highlighted and tabbed format adds structure by helping candidates move more efficiently through the International Mechanical Code and International Fuel Gas Code. Students should learn how each reference is organized, where high-use sections are located, and how definitions, tables, and exceptions affect the correct answer.\u003c\/p\u003e\n\u003cp\u003e1 Exam Prep encourages active study rather than passive reading. That means practicing code lookup, working through inspection-style questions, learning common tables, reviewing definitions, and developing a strategy for applying the code under timed conditions. This kind of preparation helps candidates build the skills needed for the exam and for practical commercial mechanical inspection work.\u003c\/p\u003e\n\u003cp\u003eFor Ohio candidates, this preparation can support a broader professional goal involving commercial mechanical inspection, building department responsibilities, municipal code enforcement, or construction compliance. No book package or study method can guarantee a passing score, certification approval, or employment outcome, but working from the correct references and practicing code navigation gives candidates a stronger foundation for exam day.\u003c\/p\u003e\n\u003ch2 style=\"color: #d32f2f;\"\u003eFAQ: What books are included in this package?\u003c\/h2\u003e\n\u003cp\u003eThis package includes the International Mechanical Code, 2021 and the International Fuel Gas Code, 2021. Both books are provided as part of a highlighted and tabbed exam book package.\u003c\/p\u003e\n\u003ch2 style=\"color: #d32f2f;\"\u003eFAQ: What does highlighted and tabbed mean?\u003c\/h2\u003e\n\u003cp\u003eHighlighted and tabbed means the books are prepared to support easier study and faster navigation. Highlighting helps draw attention to important code areas, while tabs help candidates locate major sections more efficiently during preparation.\u003c\/p\u003e\n\u003ch2 style=\"color: #d32f2f;\"\u003eFAQ: Is the ICC Commercial Mechanical Inspector (M2) exam open book?\u003c\/h2\u003e\n\u003cp\u003eYes. The ICC Commercial Mechanical Inspector (M2) exam is an open-book exam. Candidates should prepare by learning how to quickly locate and apply provisions in the International Mechanical Code and International Fuel Gas Code during timed testing.\u003c\/p\u003e\n\u003ch2 style=\"color: #d32f2f;\"\u003eFAQ: Is this package for Ohio candidates?\u003c\/h2\u003e\n\u003cp\u003eYes. This product is written for Ohio candidates preparing for the ICC Commercial Mechanical Inspector (M2) exam. Ohio certification, employment, and building department requirements are separate from the ICC exam and should be handled through the applicable Ohio building standards process.\u003c\/p\u003e\n\u003ch2 style=\"color: #d32f2f;\"\u003eFAQ: What does the ICC M2 exam cover?\u003c\/h2\u003e\n\u003cp\u003eThe exam covers commercial mechanical inspection topics such as general requirements, heating equipment, cooling equipment, ventilation, exhaust systems, duct systems, combustion air, chimneys, vents, water heaters, fuel gas systems, and related mechanical code provisions.\u003c\/p\u003e\n\u003ch2 style=\"color: #d32f2f;\"\u003eFAQ: How many questions are on the ICC M2 exam?\u003c\/h2\u003e\n\u003cp\u003eThe ICC Commercial Mechanical Inspector (M2) exam commonly includes 50 multiple-choice questions with a 2-hour time limit.\u003c\/p\u003e\n\u003ch2 style=\"color: #d32f2f;\"\u003eFAQ: Why is the International Mechanical Code included?\u003c\/h2\u003e\n\u003cp\u003eThe International Mechanical Code, 2021 is the primary reference for commercial mechanical inspection topics, including equipment installation, ventilation, exhaust, duct systems, combustion air, chimneys, vents, refrigeration, and hydronic systems.\u003c\/p\u003e\n\u003ch2 style=\"color: #d32f2f;\"\u003eFAQ: Why is the International Fuel Gas Code included?\u003c\/h2\u003e\n\u003cp\u003eThe International Fuel Gas Code, 2021 supports study of gas piping, gas appliances, combustion air, appliance venting, chimneys, shutoff valves, gas pipe sizing, and fuel gas system requirements that may appear on the M2 exam.\u003c\/p\u003e\n\u003ch2 style=\"color: #d32f2f;\"\u003eFAQ: Does this package include an online course?\u003c\/h2\u003e\n\u003cp\u003eThis product title identifies a highlighted and tabbed exam book package and includes the listed books. It does not state that an online course is included.\u003c\/p\u003e\n\u003ch2 style=\"color: #d32f2f;\"\u003eFAQ: How should I study for the ICC M2 exam?\u003c\/h2\u003e\n\u003cp\u003eStudy directly from the highlighted and tabbed books in this package. Learn the chapter structure, review definitions, practice using the index, study important tables and exceptions, and complete timed code lookup practice focused on commercial mechanical inspection scenarios.\u003c\/p\u003e\n\u003ch2 style=\"color: #d32f2f;\"\u003eFAQ: Does passing the ICC M2 exam automatically certify me in Ohio?\u003c\/h2\u003e\n\u003cp\u003ePassing the ICC M2 exam supports the ICC certification portion of commercial mechanical inspector preparation. Ohio building department certification, employment authority, and state requirements are handled separately through Ohio’s applicable building standards process.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan data-sheets-root=\"1\"\u003ePlease allow up to 15 business days for tabbed and highlighted book package orders.\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"1 Exam Prep","offers":[{"title":"Default Title","offer_id":46106402160697,"sku":null,"price":545.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1789\/0861\/files\/OH-Comm.Mech.Inspector_ICC-M2_-HT.jpg?v=1782838640","url":"https:\/\/1examprep.com\/products\/ohio-commercial-mechanical-inspector-icc-m2-highlighted-tabbed-book-package","provider":"1 Exam Prep","version":"1.0","type":"link"}