{"product_id":"washington-a-domestic-pump-master-electrician-book-package","title":"Washington A-Domestic Pump Master Electrician Book Package","description":"\u003ch1 style=\"color: #d32f2f;\"\u003eWashington A-Domestic Pump Master Electrician Book Package\u003c\/h1\u003e\n\n\u003cp\u003ePrepare for the Washington Domestic Pump Master Electrician examination with a focused book package built around the primary electrical code, Washington electrical law, and state administrative rules used for the state's \u003cstrong\u003e03A Domestic Pump specialty\u003c\/strong\u003e. This package includes the \u003cstrong\u003eRevised Code of Washington (RCW) Chapter 19.28\u003c\/strong\u003e, \u003cstrong\u003eWashington Administrative Code (WAC) Chapter 296-46B\u003c\/strong\u003e, and the \u003cstrong\u003eNational Electrical Code, NEC, 2020 Edition\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003cp\u003eWashington officially identifies the Domestic Pump specialty as \u003cstrong\u003e03A\u003c\/strong\u003e. The Domestic Pump Master Electrician credential is a specialty master certification for electricians who have progressed through the 03A specialty and meet Washington's master electrician eligibility requirements. Candidates should be prepared to demonstrate knowledge of electrical installations associated with domestic water pumping systems, pump motors, controls, grounding and bonding, overcurrent protection, wiring methods, electrical equipment, and Washington-specific electrical laws and rules.\u003c\/p\u003e\n\n\u003cp\u003eWashington electrical examinations are \u003cstrong\u003eopen book\u003c\/strong\u003e. Approved reference materials may be used during testing, making familiarity with the NEC, RCW, and WAC an important part of preparation. Candidates should practice identifying which reference applies to a question and locating the correct article, section, table, or Washington rule efficiently.\u003c\/p\u003e\n\n\u003cp\u003eThe Domestic Pump specialty is narrower than Washington's broader 03 Pump \u0026amp; Irrigation classification. It applies to specified electrical work associated with domestic water pumping systems and related equipment within the scope established by Washington rules. Understanding those boundaries is important because specialty master certification does not create unrestricted authority to perform all electrical work.\u003c\/p\u003e\n\n\u003cp\u003eThis package gives candidates three core references for preparing for both the technical and Washington-specific portions of the examination. The NEC addresses electrical installation requirements, RCW Chapter 19.28 establishes Washington electrical law, and WAC Chapter 296-46B contains detailed rules covering specialty classifications, certification, inspections, permits, examinations, and electrical installations.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eWhat You Get\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRevised Code of Washington (RCW) Chapter 19.28\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eWashington's electrical law covering electricians, master electricians, electrical contractors, electrical installations, certification, enforcement, responsibilities, and other statutory requirements governing electrical work in the state.\u003c\/span\u003e\n\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWashington Administrative Code (WAC) Chapter 296-46B\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eWashington's detailed electrical safety, administration, licensing, certification, examination, specialty-scope, inspection, permit, and installation rules. This reference includes the requirements that define and regulate the 03A Domestic Pump specialty.\u003c\/span\u003e\n\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNational Electrical Code, NEC, 2020 Edition\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eThe NEC edition identified for Washington's current electrical examination program. It provides the national electrical requirements used for wiring methods, motors, grounding and bonding, overcurrent protection, electrical equipment, special conditions, and other subjects relevant to Domestic Pump work.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eStudying these books together helps candidates connect technical electrical requirements with Washington-specific licensing and specialty rules. An examination question may require a technical NEC answer, a Washington code provision, or both.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eExam Details\u003c\/h2\u003e\n\n\u003cp\u003eThe Washington Domestic Pump specialty is officially identified as \u003cstrong\u003e03A-Domestic Pump\u003c\/strong\u003e. For the Master Electrician credential, the published examination outline divides testing into \u003cstrong\u003eNEC \u0026amp; Theory\u003c\/strong\u003e and \u003cstrong\u003eWashington Codes\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eClassification:\u003c\/strong\u003e 03A Domestic Pump Master Electrician\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNEC \u0026amp; Theory:\u003c\/strong\u003e Approximately 34 questions\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTime Allowed for NEC \u0026amp; Theory:\u003c\/strong\u003e 3 hours\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWashington Codes:\u003c\/strong\u003e Approximately 20 questions\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTime Allowed for Washington Codes:\u003c\/strong\u003e 1 hour\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTotal Questions:\u003c\/strong\u003e Approximately 54 questions across both sections\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTotal Testing Time:\u003c\/strong\u003e Approximately 4 hours across both sections\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePassing Score:\u003c\/strong\u003e 70% on each required examination section\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExam Type:\u003c\/strong\u003e Open book\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTesting Provider:\u003c\/strong\u003e PSI\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNEC Edition:\u003c\/strong\u003e National Electrical Code, 2020 Edition\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe NEC \u0026amp; Theory examination outline includes general NEC requirements, wiring and protection, overcurrent protection, grounding and bonding, wiring methods, electrical equipment, motors and related equipment, hazardous locations, special conditions, and general trade knowledge and theory.\u003c\/p\u003e\n\n\u003cp\u003eAmong the more heavily represented subjects are wiring methods, motors and related electrical equipment, grounding and bonding, overcurrent protection, and general trade knowledge. Candidates should also be familiar with the Washington laws and rules that define specialty scope and certification responsibilities.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eOpen Book Test\u003c\/h2\u003e\n\n\u003cp\u003eThe Washington Domestic Pump Master Electrician examination is an \u003cstrong\u003eopen book test\u003c\/strong\u003e. Candidates may bring approved references into the testing center under Washington Labor \u0026amp; Industries examination rules.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003e2020 National Electrical Code\u003c\/strong\u003e is permitted. Permanent index tabs are acceptable, while removable tabs, sticky notes, and handwritten notes are prohibited. Original copyrighted materials may contain highlighting, underlining, and permanent index tabs when they otherwise comply with examination requirements.\u003c\/p\u003e\n\n\u003cp\u003ePrinted copies of \u003cstrong\u003eRCW Chapter 19.28\u003c\/strong\u003e and \u003cstrong\u003eWAC Chapter 296-46B\u003c\/strong\u003e are also permitted. Printed copies of Washington electrical laws and rules should be prepared in the format required for examination use, including placement in a three-ring binder.\u003c\/p\u003e\n\n\u003cp\u003eOpen book testing rewards candidates who know how their references are organized. Candidates should practice navigating NEC articles related to motors, overcurrent protection, wiring methods, grounding and bonding, and electrical equipment. The Washington references should also be studied so specialty scope, licensing provisions, certification rules, permits, and inspections can be located quickly.\u003c\/p\u003e\n\n\u003cp\u003eA useful approach is to identify the type of question before opening a book. Technical installation questions typically direct the candidate toward the NEC, while questions involving Washington certification, specialty limits, legal responsibilities, or examination requirements may require the RCW or WAC.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eLicensing Steps\u003c\/h2\u003e\n\n\u003cp\u003eWashington Domestic Pump Master Electrician certification is administered through the \u003cstrong\u003eWashington State Department of Labor \u0026amp; Industries\u003c\/strong\u003e. Candidates follow the specialty master electrician pathway.\u003c\/p\u003e\n\n\u003col\u003e\n  \u003cli\u003e\n\u003cstrong\u003eObtain the 03A Domestic Pump Electrician certification.\u003c\/strong\u003e The candidate must first become certified in the applicable Washington electrical specialty.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHold the specialty certification for the required period.\u003c\/strong\u003e Washington requires a specialty master electrician candidate to have been certified in the specialty for at least two years.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApply for the Master Electrician examination.\u003c\/strong\u003e Submit the required application and information to Washington Labor \u0026amp; Industries.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReceive examination approval.\u003c\/strong\u003e Master electrician candidates must receive the applicable L\u0026amp;I determination before scheduling their exam.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrepare for NEC \u0026amp; Theory and Washington Codes.\u003c\/strong\u003e Study the approved references and practice both technical electrical questions and Washington-specific requirements.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSchedule through PSI.\u003c\/strong\u003e Once approved, arrange the appropriate 03A Master Electrician examination.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePass each required section.\u003c\/strong\u003e Washington requires a score of at least 70% on each examination section.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eComplete the certification process.\u003c\/strong\u003e After successful examination completion, follow Washington Labor \u0026amp; Industries procedures for issuance of the specialty Master Electrician certificate.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003cp\u003eWhen the specialty master electrician certificate is issued, it replaces the existing electrician certificate for the same specialty. Washington does not issue both an electrician certificate and master electrician certificate to the same person for the same classification at the same time.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eState Requirements\u003c\/h2\u003e\n\n\u003cp\u003eWashington recognizes Domestic Pump as specialty classification \u003cstrong\u003e03A\u003c\/strong\u003e. It is separate from the broader 03 Pump \u0026amp; Irrigation specialty and has its own defined scope and qualification requirements.\u003c\/p\u003e\n\n\u003cp\u003eTo qualify for a specialty Master Electrician examination, the applicant must have been certified by Washington Labor \u0026amp; Industries in the applicable specialty for at least \u003cstrong\u003etwo years\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003cp\u003eThe underlying 03A Domestic Pump electrician pathway has separate experience rules. Washington permits examination eligibility after at least \u003cstrong\u003e720 hours of qualifying directly supervised experience\u003c\/strong\u003e. A total of \u003cstrong\u003e2,000 hours of qualifying work experience\u003c\/strong\u003e is required for full Domestic Pump electrician certification.\u003c\/p\u003e\n\n\u003cp\u003eUntil the appropriate examination is passed, trainees working toward certain 2,000-hour specialties must remain under the supervision required by Washington rules. After successfully completing the applicable examination, eligible trainees may use the state's modified supervision provisions while completing the remaining experience required for certification.\u003c\/p\u003e\n\n\u003cp\u003eHours earned in specialty classifications requiring 2,000 hours or less generally do not count toward qualification for the General Journey Level certification or the 4,000-hour specialties, except where Washington rules specifically provide otherwise.\u003c\/p\u003e\n\n\u003cp\u003eThe Domestic Pump specialty is associated with specified electrical work for domestic water pumping systems. Candidates should study the exact scope language in WAC 296-46B-920 so they understand which circuits, equipment, controls, and related installations fall within the 03A classification.\u003c\/p\u003e\n\n\u003cp\u003eWashington also imposes continuing education requirements on master electricians. Certificates are renewed on a three-year cycle, and the continuing education program includes code update training, Washington RCW\/WAC training, and approved industry-related education.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eReference Books\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRevised Code of Washington (RCW) Chapter 19.28\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eThis reference contains Washington electrical statutes governing electrician and master electrician certification, contractors, electrical installations, enforcement, responsibilities, and related licensing requirements. It supports preparation for the Washington Codes section.\u003c\/span\u003e\n\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWashington Administrative Code (WAC) Chapter 296-46B\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eThis reference contains Washington electrical safety rules, certification requirements, examination provisions, permits, inspections, specialty classifications, continuing education requirements, and detailed state electrical rules. Candidates should pay particular attention to provisions applying to 03A Domestic Pump work.\u003c\/span\u003e\n\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNational Electrical Code, NEC, 2020 Edition\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eThe 2020 NEC provides technical electrical requirements for conductors, wiring methods, grounding and bonding, motors, overcurrent protection, electrical equipment, hazardous locations, special conditions, and other installations relevant to Domestic Pump work.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe most effective preparation uses the books as an integrated reference set. The NEC establishes technical requirements, while Washington laws and rules determine how those requirements are applied within the state's specialty licensing system.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eExam Room Approved Books\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNational Electrical Code, NEC, 2020 Edition\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eThe 2020 NEC is permitted for Washington electrical examinations. Permanent index tabs, highlighting, and underlining are allowed under examination rules. Handwritten notes, removable tabs, and sticky notes are prohibited.\u003c\/span\u003e\n\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRevised Code of Washington (RCW) Chapter 19.28\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003ePrinted copies of Washington electrical law may be used during testing when prepared in accordance with Labor \u0026amp; Industries requirements.\u003c\/span\u003e\n\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWashington Administrative Code (WAC) Chapter 296-46B\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003ePrinted copies of Washington electrical rules may be used during the examination and should be organized according to the applicable testing-center requirements.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003ePracticing directly with these references before exam day can help candidates develop faster navigation and greater familiarity with commonly used provisions.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eTest Information and Study Materials\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003eMotors and Related Equipment:\u003c\/strong\u003e Domestic pump systems depend on motor-driven equipment. Review conductor sizing, motor overload protection, short-circuit and ground-fault protection, disconnecting means, controllers, and related NEC motor requirements.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eGrounding and Bonding:\u003c\/strong\u003e Study equipment grounding conductors, grounding electrode systems, bonding requirements, service grounding, and grounding provisions that apply to pump equipment and associated electrical systems.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWiring Methods:\u003c\/strong\u003e Wiring methods represent an important examination area. Review cables, raceways, underground installations, wet-location requirements, boxes, fittings, conductor protection, support requirements, and permitted wiring methods.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eOvercurrent Protection:\u003c\/strong\u003e Candidates should understand circuit breakers, fuses, conductor protection, motor circuit protection, overload protection, and the difference between overload devices and short-circuit or ground-fault protective devices.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eElectrical Equipment:\u003c\/strong\u003e Review equipment installation requirements, disconnects, controllers, switches, utilization equipment, and other NEC provisions applicable to domestic pumping systems.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eGeneral Trade Knowledge and Theory:\u003c\/strong\u003e Practice Ohm's law, electrical power calculations, voltage, current, resistance, conductor calculations, and other trade mathematics that support pump-system electrical work.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWashington Specialty Scope:\u003c\/strong\u003e Study the limits of the 03A Domestic Pump certification carefully. A master electrician must understand not only how electrical work is performed but also whether the work is authorized under the specialty certificate.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWashington Codes:\u003c\/strong\u003e Review certification procedures, contractor requirements, permits, inspections, examination rules, renewal requirements, trainee provisions, and Washington-specific electrical regulations contained in RCW Chapter 19.28 and WAC Chapter 296-46B.\u003c\/p\u003e\n\n\u003cp\u003eA productive preparation strategy is to work through practice questions and identify the likely reference before beginning a code search. If the question is technical, determine the likely NEC article. If it involves licensing, scope, inspection, or certification, begin with the Washington references.\u003c\/p\u003e\n\n\u003cp\u003eTimed navigation practice can help turn open book access into a practical advantage. Practice finding motor requirements, grounding provisions, wiring-method rules, specialty definitions, and Washington licensing provisions until the books become familiar working tools.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eHow 1 Exam Prep Helps You Reach Your Goal\u003c\/h2\u003e\n\n\u003cp\u003e1 Exam Prep helps Washington Domestic Pump Master Electrician candidates organize preparation around the three core references in this package: the \u003cstrong\u003e2020 National Electrical Code\u003c\/strong\u003e, \u003cstrong\u003eRCW Chapter 19.28\u003c\/strong\u003e, and \u003cstrong\u003eWAC Chapter 296-46B\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003cp\u003eThe package supports trade-focused review of the subjects closely connected to Domestic Pump electrical work, including motors, controls, grounding and bonding, wiring methods, overcurrent protection, electrical equipment, electrical theory, and Washington specialty requirements.\u003c\/p\u003e\n\n\u003cp\u003e1 Exam Prep encourages candidates to build practical reference-navigation skills for the open book examination. Instead of trying to memorize every code section, candidates can learn how to recognize the subject, identify the correct reference, locate the governing requirement, and apply it accurately.\u003c\/p\u003e\n\n\u003cp\u003eWashington-specific preparation is especially important for specialty master candidates. The examination is not only about technical installation knowledge. It also requires familiarity with Washington laws, certification rules, specialty boundaries, permits, inspections, and professional responsibilities.\u003c\/p\u003e\n\n\u003cp\u003ePractice-oriented preparation can help candidates identify weaker areas before examination day. Candidates who need more work on motors, grounding, state rules, or wiring methods can devote additional study time to those subjects rather than reviewing every topic equally.\u003c\/p\u003e\n\n\u003cp\u003eThe goal is to combine practical Domestic Pump experience with organized study, code familiarity, Washington regulatory knowledge, and efficient reference navigation. This book package provides the core materials needed to develop that preparation structure.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eWhat is the official Washington Domestic Pump classification?\u003c\/h2\u003e\n\n\u003cp\u003eWashington officially identifies Domestic Pump as electrical specialty classification \u003cstrong\u003e03A\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eWhat books are included in this package?\u003c\/h2\u003e\n\n\u003cp\u003eThis package includes \u003cstrong\u003eRCW Chapter 19.28\u003c\/strong\u003e, \u003cstrong\u003eWAC Chapter 296-46B\u003c\/strong\u003e, and the \u003cstrong\u003e2020 National Electrical Code\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eIs the Washington Domestic Pump Master Electrician exam open book?\u003c\/h2\u003e\n\n\u003cp\u003eYes. Washington electrical licensing examinations are open book, subject to Labor \u0026amp; Industries testing-center rules.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eHow many questions are on the 03A Master Electrician exam?\u003c\/h2\u003e\n\n\u003cp\u003eThe published examination outline lists approximately \u003cstrong\u003e34 NEC \u0026amp; Theory questions\u003c\/strong\u003e and \u003cstrong\u003e20 Washington Codes questions\u003c\/strong\u003e, for approximately 54 questions total.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eHow much time is allowed?\u003c\/h2\u003e\n\n\u003cp\u003eThe NEC \u0026amp; Theory section allows 3 hours, and the Washington Codes section allows 1 hour.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eWhat score is required to pass?\u003c\/h2\u003e\n\n\u003cp\u003eWashington requires a minimum score of \u003cstrong\u003e70%\u003c\/strong\u003e on each required examination section.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eHow long must I hold the Domestic Pump electrician certification before taking the master exam?\u003c\/h2\u003e\n\n\u003cp\u003eA specialty Master Electrician candidate must have been certified by Washington Labor \u0026amp; Industries in the applicable specialty for at least \u003cstrong\u003etwo years\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eHow much experience is required for the underlying 03A Electrician certification?\u003c\/h2\u003e\n\n\u003cp\u003eWashington requires \u003cstrong\u003e2,000 total hours of qualifying Domestic Pump work experience\u003c\/strong\u003e for certification. Examination eligibility can begin after 720 hours of qualifying directly supervised experience under the applicable specialty rules.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eWhich NEC edition is included?\u003c\/h2\u003e\n\n\u003cp\u003eThis package includes the \u003cstrong\u003eNational Electrical Code, NEC, 2020 Edition\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eCan I bring RCW 19.28 and WAC 296-46B into the exam?\u003c\/h2\u003e\n\n\u003cp\u003eYes. Printed copies of Washington electrical laws and rules are permitted when prepared according to the applicable examination requirements.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eCan I highlight and tab my NEC?\u003c\/h2\u003e\n\n\u003cp\u003ePermanent index tabs, highlighting, and underlining are permitted in qualifying copyrighted materials. Handwritten notes, sticky notes, and removable tabs are prohibited.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eDoes the Domestic Pump Master Electrician certification allow unrestricted electrical work?\u003c\/h2\u003e\n\n\u003cp\u003eNo. It remains a specialty master certification. Work must remain within the scope of the 03A Domestic Pump classification unless the individual holds another certification authorizing additional electrical work.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eWhat should I focus on when studying?\u003c\/h2\u003e\n\n\u003cp\u003eFocus on motors and related equipment, wiring methods, grounding and bonding, overcurrent protection, electrical theory, Domestic Pump specialty scope, and Washington electrical laws and rules.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eWho administers the Washington electrical examination?\u003c\/h2\u003e\n\n\u003cp\u003eWashington electrical examinations are administered through \u003cstrong\u003ePSI\u003c\/strong\u003e as part of the Washington Labor \u0026amp; Industries certification process.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eWhat happens after I become a specialty Master Electrician?\u003c\/h2\u003e\n\n\u003cp\u003eThe master certificate replaces the electrician certificate for the same specialty. The certificate holder must continue meeting Washington renewal and continuing education requirements and must remain within the authorized scope of the 03A Domestic Pump classification.\u003c\/p\u003e\n","brand":"1 Exam Prep","offers":[{"title":"Default Title","offer_id":46541061095481,"sku":null,"price":295.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1789\/0861\/files\/WA-PUMPMASTERELECTRICIAN-BOOKS_1.jpg?v=1789740880","url":"https:\/\/1examprep.com\/products\/washington-a-domestic-pump-master-electrician-book-package","provider":"1 Exam Prep","version":"1.0","type":"link"}