{"product_id":"washington-door-gate-similar-systems-master-electrician-book-package","title":"Washington Door, Gate \u0026 Similar Systems Master Electrician Book Package","description":"\u003ch1 style=\"color: #d32f2f;\"\u003eWashington Door, Gate \u0026amp; Similar Systems Master Electrician Book Package\u003c\/h1\u003e\n\n\u003cp\u003ePrepare for the Washington Door, Gate \u0026amp; Similar Systems Master Electrician examination with a focused reference package built around the electrical code, Washington electrical law, and state administrative rules used for the \u003cstrong\u003e10 Door, Gate \u0026amp; Similar Systems specialty\u003c\/strong\u003e. This package includes the \u003cstrong\u003eRevised Code of Washington (RCW) Chapter 19.28\u003c\/strong\u003e, \u003cstrong\u003eWashington Administrative Code (WAC) Chapter 296-46B\u003c\/strong\u003e, and the \u003cstrong\u003eNational Electrical Code, NEC, 2020 Edition\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003cp\u003eWashington identifies this specialty as \u003cstrong\u003e10 Door, Gate \u0026amp; Similar Systems\u003c\/strong\u003e. The classification covers defined electrical operator wiring and equipment associated with electric gates, doors, windows, awnings, movable partitions, curtains, and similar electrically operated systems. The specialty includes specific low-voltage systems, certain branch circuits originating at listed operator control panels, limited reconnection of line-voltage power, and a wide range of operator controls and sensing devices.\u003c\/p\u003e\n\n\u003cp\u003eThe Washington Master Electrician examination for this specialty combines National Electrical Code knowledge, electrical theory, and Washington electrical laws and rules. Candidates should be prepared for questions involving general NEC requirements, wiring and protection, overcurrent protection, grounding and bonding, wiring methods, electrical equipment, motors and related equipment, hazardous locations, special occupancies, special conditions, general trade knowledge, and the Washington rules that define the 10 specialty.\u003c\/p\u003e\n\n\u003cp\u003eThe examination is \u003cstrong\u003eopen book\u003c\/strong\u003e. Approved references may be used during testing, making efficient navigation of the NEC, RCW Chapter 19.28, and WAC Chapter 296-46B an important part of preparation. Candidates should practice identifying the subject of a question, determining which reference applies, and locating the controlling provision without spending unnecessary time searching.\u003c\/p\u003e\n\n\u003cp\u003eThe Door, Gate \u0026amp; Similar Systems specialty has precise limitations. Certain branch circuits originating in a listed door, gate, or similar-system electric operator control panel may not exceed \u003cstrong\u003e600 volts and 20 amperes\u003c\/strong\u003e and must supply only qualifying system components. Line-voltage power may also be reconnected to a listed operator control panel when Washington's conditions involving voltage, amperage, branch-circuit characteristics, and conductor or conduit length are met.\u003c\/p\u003e\n\n\u003cp\u003eThis package brings together the three core references needed for organized study. The NEC provides national technical requirements, RCW Chapter 19.28 establishes Washington electrical law, and WAC Chapter 296-46B contains the detailed specialty scope, certification, examination, supervision, contractor, permit, inspection, and installation rules that apply to Washington electrical work.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eWhat You Get\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRevised Code of Washington (RCW) Chapter 19.28\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eWashington electrical law covering electricians, Master Electricians, electrical contractors, certification, electrical installations, enforcement, responsibilities, and other statutory requirements affecting electrical work throughout the state.\u003c\/span\u003e\n\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWashington Administrative Code (WAC) Chapter 296-46B\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eWashington's detailed electrical safety, licensing, certification, specialty-scope, examination, contractor, supervision, permit, inspection, and installation rules. This reference defines the 10 Door, Gate \u0026amp; Similar Systems specialty and its limitations.\u003c\/span\u003e\n\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNational Electrical Code, NEC, 2020 Edition\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eThe NEC edition used for the Washington examination program covered by this package. It provides technical requirements for wiring and protection, overcurrent protection, grounding and bonding, wiring methods, electrical equipment, motors, special occupancies, hazardous locations, and special conditions.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eExam Details\u003c\/h2\u003e\n\n\u003cp\u003eThe Washington \u003cstrong\u003e10 Door, Gate \u0026amp; Similar Systems Master Electrician\u003c\/strong\u003e examination contains two required sections: \u003cstrong\u003eNEC \u0026amp; Theory\u003c\/strong\u003e and \u003cstrong\u003eWashington Codes\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNEC \u0026amp; Theory:\u003c\/strong\u003e Approximately 34 questions\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTime Allowed for NEC \u0026amp; Theory:\u003c\/strong\u003e 2 hours\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWashington Codes:\u003c\/strong\u003e Approximately 20 questions\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTime Allowed for Washington Codes:\u003c\/strong\u003e 1 hour\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTotal Questions:\u003c\/strong\u003e Approximately 54 questions across both sections\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTotal Testing Time:\u003c\/strong\u003e Approximately 3 hours across both sections\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePassing Score:\u003c\/strong\u003e 70% or greater on each required examination section\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExam Type:\u003c\/strong\u003e Open book\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTesting Provider:\u003c\/strong\u003e PSI\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Code Reference:\u003c\/strong\u003e National Electrical Code, NEC, 2020 Edition\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe NEC \u0026amp; Theory examination outline includes approximately one question from NEC Article 90, two from NEC Articles 100 through 110, one involving wiring and protection, four involving overcurrent protection, four involving grounding and bonding, six involving wiring methods, two involving electrical equipment, four involving motors, HVAC equipment, generators and transformers, one involving hazardous locations, one involving special occupancies, two involving special conditions, and approximately six questions involving general trade knowledge and electrical theory.\u003c\/p\u003e\n\n\u003cp\u003eThe Washington Codes section contains approximately 20 questions involving Washington laws and administrative rules. Candidates should prepare for specialty scope, Master Electrician qualification requirements, certification, contractor responsibilities, examinations, permits, inspections, supervision, and the legal boundaries of Door, Gate \u0026amp; Similar Systems work.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eOpen Book Test\u003c\/h2\u003e\n\n\u003cp\u003eThe Washington Door, Gate \u0026amp; Similar Systems Master Electrician examination is an \u003cstrong\u003eopen book test\u003c\/strong\u003e. Approved reference materials may be used at the testing center under Washington electrical examination rules.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003e2020 National Electrical Code\u003c\/strong\u003e is permitted during the examination. Permanent index tabs are acceptable. Removable tabs, sticky notes, repositionable notes, and handwritten notes are prohibited. Original copyrighted reference materials may contain highlighting, underlining, and permanent index tabs when they otherwise comply with examination requirements.\u003c\/p\u003e\n\n\u003cp\u003ePrinted copies of \u003cstrong\u003eRCW Chapter 19.28\u003c\/strong\u003e and \u003cstrong\u003eWAC Chapter 296-46B\u003c\/strong\u003e may also be used during testing. Printed copies of Washington electrical laws and rules should be hole-punched and placed in a three-ring binder.\u003c\/p\u003e\n\n\u003cp\u003eThe NEC \u0026amp; Theory section contains approximately 34 questions in two hours, so candidates should practice locating wiring-method, grounding, overcurrent-protection, motor, and equipment requirements efficiently. Wiring methods represent one of the larger technical categories in the published examination outline.\u003c\/p\u003e\n\n\u003cp\u003eWashington Codes preparation should include repeated review of the 10 specialty definition and its limits. Candidates should be able to quickly locate the rules for low-voltage Class 2 systems, control panels, branch circuits, line-voltage reconnection, conductor and conduit length, classified locations, and prohibited branch-circuit work.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eLicensing Steps\u003c\/h2\u003e\n\n\u003cp\u003eWashington Door, Gate \u0026amp; Similar Systems Master Electrician certification is administered through the \u003cstrong\u003eWashington State Department of Labor \u0026amp; Industries\u003c\/strong\u003e. A specialty Master Electrician candidate must first hold the corresponding Washington specialty electrician certificate.\u003c\/p\u003e\n\n\u003col\u003e\n  \u003cli\u003e\n\u003cstrong\u003eObtain the Door, Gate \u0026amp; Similar Systems specialty electrician certificate.\u003c\/strong\u003e The Master Electrician pathway begins with certification in the corresponding specialty.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHold the specialty electrician certificate for at least two years.\u003c\/strong\u003e Washington requires a specialty Master Electrician applicant to have been certified by L\u0026amp;I in the applicable specialty for at least two years.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApply for the Master Electrician examination.\u003c\/strong\u003e Submit the applicable examination application to Washington Labor \u0026amp; Industries.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReceive L\u0026amp;I examination approval.\u003c\/strong\u003e Labor \u0026amp; Industries reviews the application and verifies eligibility before the candidate schedules testing.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrepare for NEC \u0026amp; Theory.\u003c\/strong\u003e Study the 2020 NEC with particular attention to wiring methods, grounding and bonding, overcurrent protection, motors, equipment, special occupancies, and electrical theory.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrepare for Washington Codes.\u003c\/strong\u003e Review RCW Chapter 19.28 and WAC Chapter 296-46B, especially the Door, Gate \u0026amp; Similar Systems scope and Master Electrician requirements.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSchedule the examination through PSI.\u003c\/strong\u003e Follow the scheduling instructions provided after examination approval.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTake both required examination sections.\u003c\/strong\u003e Complete NEC \u0026amp; Theory and Washington Codes.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePass each required section.\u003c\/strong\u003e A score of at least 70% is required on each section.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eComplete the certification process.\u003c\/strong\u003e Follow Washington Labor \u0026amp; Industries procedures for issuance of the specialty Master Electrician certificate.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eState Requirements\u003c\/h2\u003e\n\n\u003cp\u003eWashington identifies Door, Gate \u0026amp; Similar Systems as electrical specialty classification \u003cstrong\u003e10\u003c\/strong\u003e. To qualify for the specialty Master Electrician examination, an applicant must have held the corresponding Washington specialty electrician certificate for at least \u003cstrong\u003etwo years\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003cp\u003eThe underlying Door, Gate \u0026amp; Similar Systems Electrician pathway is a \u003cstrong\u003e2,000-hour specialty\u003c\/strong\u003e. A trainee may become eligible for the specialty electrician examination after completing at least \u003cstrong\u003e720 hours of qualifying work experience\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003cp\u003eUntil the applicable specialty examination is successfully completed, the trainee must work under \u003cstrong\u003e100 percent supervision\u003c\/strong\u003e. Full specialty electrician certification requires 2,000 hours of qualifying experience.\u003c\/p\u003e\n\n\u003cp\u003eThe specialty may \u003cstrong\u003einstall, service, maintain, repair, or replace door, gate, and similar systems electrical operator wiring and equipment\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003cp\u003eQualifying systems include electric gates, doors, windows, awnings, movable partitions, curtains, and similar systems. Equipment may include operators, control push buttons, key switches, keypads, pull cords, air or electric treadles, sensing edges, coil cords, take-up reels, clocks, photoelectric cells, loop detectors, motion detectors, remote radios and receivers, antennas, timers, lock-out switches, stand-alone release devices with smoke detection, strobe lights, annunciators, control panels, wiring, and conductor terminations.\u003c\/p\u003e\n\n\u003cp\u003eThe specialty includes \u003cstrong\u003elow-voltage NEC Class 2 door, gate, and similar-system operator systems\u003c\/strong\u003e when the operator system is not connected to other systems.\u003c\/p\u003e\n\n\u003cp\u003eIt also includes branch circuits originating in a \u003cstrong\u003elisted door, gate, or similar-system electric operator control panel\u003c\/strong\u003e when those branch circuits supply only qualifying door, gate, or similar-system components. The circuit must not exceed \u003cstrong\u003e600 volts and 20 amperes\u003c\/strong\u003e, and the supplied component must be within sight of the listed control panel.\u003c\/p\u003e\n\n\u003cp\u003eLine-voltage power may be reconnected to a listed door, gate, or similar-system electric operator control panel when the characteristics of the branch circuit or feeder are not modified, the circuit or feeder does not exceed \u003cstrong\u003e600 volts and 20 amperes\u003c\/strong\u003e, and the conductor or conduit extending from the branch-circuit or feeder disconnecting means or junction box does not exceed \u003cstrong\u003esix feet\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003cp\u003eThe specialty does not include electrical work governed by the NEC articles addressing classified hazardous locations, including the applicable requirements of Articles 500 through 516 identified by Washington rules.\u003c\/p\u003e\n\n\u003cp\u003eThe classification also does not authorize installation, repair, or replacement of line-voltage branch-circuit conductors, services, feeders, panelboards, or disconnect switches supplying the door, gate, or similar-system electric operator control panel.\u003c\/p\u003e\n\n\u003cp\u003eAs a specialty Master Electrician, the certificate holder may work with the tools of the trade within the scope of the specialty. A Master Electrician may also be assigned as the designated master for an electrical contractor when applicable contractor and assignment requirements are satisfied.\u003c\/p\u003e\n\n\u003cp\u003eWhen assigned to an electrical contractor, the Master Electrician accepts responsibility for helping ensure that the contractor complies with Washington electrical laws and rules and performs work within the authority of its license.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eReference Books\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRevised Code of Washington (RCW) Chapter 19.28\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eThis reference contains Washington electrical statutes governing electricians, Master Electricians, electrical contractors, certification, installations, enforcement, and related legal responsibilities within the state's electrical licensing system.\u003c\/span\u003e\n\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWashington Administrative Code (WAC) Chapter 296-46B\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eThis reference contains Washington rules governing specialty classifications, work experience, supervision, examinations, Master Electrician certification, contractors, permits, inspections, and the detailed scope of the 10 Door, Gate \u0026amp; Similar Systems specialty.\u003c\/span\u003e\n\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNational Electrical Code, NEC, 2020 Edition\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eThe NEC provides technical requirements covering wiring and protection, overcurrent protection, grounding and bonding, wiring methods, electrical equipment, motors, hazardous locations, special occupancies, special conditions, and related electrical work.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eCandidates should study these references as an integrated set. Technical questions involving grounding, wiring, motors, or overcurrent protection generally point toward the NEC, while questions involving specialty authority, supervision, certification, or contractor requirements generally require the RCW or WAC.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eExam Room Approved Books\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNational Electrical Code, NEC, 2020 Edition\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eThe 2020 NEC is permitted during the Washington examination covered by this package. Permanent index tabs, highlighting, and underlining are allowed under applicable testing rules, while handwritten notes, removable tabs, and sticky notes are prohibited.\u003c\/span\u003e\n\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRevised Code of Washington (RCW) Chapter 19.28\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003ePrinted copies of Washington electrical law may be used during testing when prepared according to Labor \u0026amp; Industries examination requirements.\u003c\/span\u003e\n\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWashington Administrative Code (WAC) Chapter 296-46B\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003ePrinted copies of Washington electrical rules may be used during testing when prepared according to the applicable examination requirements.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eUsing the same reference materials during preparation and on examination day can help candidates become familiar with code organization, article numbers, definitions, tables, specialty provisions, and Washington-specific requirements.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eTest Information and Study Materials\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003eWiring Methods:\u003c\/strong\u003e Wiring methods represent a major technical area on the Master Electrician examination. Review conductors, cables, raceways, boxes, fittings, flexible wiring methods, conductor protection, support requirements, and operator-system wiring.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eOvercurrent Protection:\u003c\/strong\u003e Study circuit breakers, fuses, conductor protection, equipment ratings, branch-circuit protection, and requirements affecting operator control panels and supplied components.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eGrounding and Bonding:\u003c\/strong\u003e Review equipment grounding conductors, bonding, grounding continuity, enclosures, raceways, and grounding requirements applicable to motors, controls, and electrical operator equipment.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eMotors and Related Equipment:\u003c\/strong\u003e Electric doors and gates commonly use motors and controllers. Review motor circuits, overload protection, controllers, disconnecting means, transformers, and related NEC requirements.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eElectrical Equipment:\u003c\/strong\u003e Study switches, flexible cords, controllers, disconnecting means, equipment wiring, control components, and other electrical equipment associated with operator systems.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSpecial Conditions:\u003c\/strong\u003e Review applicable NEC special-condition requirements and understand how operator systems may interface with other electrical systems.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eHazardous Locations:\u003c\/strong\u003e The examination includes hazardous-location knowledge even though Washington excludes the classified-location work identified in the applicable NEC articles from the specialty scope.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSpecial Occupancies:\u003c\/strong\u003e Review NEC requirements that may affect operator systems installed in specialized buildings and occupancies.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eGeneral Trade Knowledge and Theory:\u003c\/strong\u003e Practice voltage, current, resistance, power, Ohm's law, series and parallel circuits, motors, controls, troubleshooting, and other electrical concepts relevant to electrically operated door and gate systems.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSpecialty Scope:\u003c\/strong\u003e Know the 600-volt, 20-ampere limits, the six-foot reconnection provision, the within-sight requirement for components supplied from qualifying control-panel branch circuits, and the restrictions on services, feeders, panelboards, disconnects, and line-voltage branch-circuit conductors.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eControl and Sensing Equipment:\u003c\/strong\u003e Review how operator systems use push buttons, key switches, keypads, loop detectors, motion detectors, sensing edges, photoelectric devices, radios, receivers, timers, control panels, and related wiring.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eMaster Electrician Responsibilities:\u003c\/strong\u003e Review specialty eligibility, contractor assignment requirements, certification, permits, inspections, examinations, and the responsibilities associated with serving as the designated Master Electrician for a contractor.\u003c\/p\u003e\n\n\u003cp\u003eA useful preparation method is to classify each practice question before opening a reference. Technical questions about conductors, motors, grounding, or overcurrent protection will usually point toward the NEC. Questions involving permitted specialty work, supervision, certification, or contractor responsibilities will generally require Washington law or administrative rules.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eHow 1 Exam Prep Helps You Reach Your Goal\u003c\/h2\u003e\n\n\u003cp\u003e1 Exam Prep helps Washington Door, Gate \u0026amp; Similar Systems Master Electrician candidates organize preparation around the three core references included in this package: the \u003cstrong\u003e2020 National Electrical Code\u003c\/strong\u003e, \u003cstrong\u003eRCW Chapter 19.28\u003c\/strong\u003e, and \u003cstrong\u003eWAC Chapter 296-46B\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003cp\u003eThe package supports trade-focused review of wiring methods, overcurrent protection, grounding and bonding, electrical equipment, motors, control systems, electrical theory, specialty limitations, Master Electrician responsibilities, and Washington electrical laws and rules.\u003c\/p\u003e\n\n\u003cp\u003e1 Exam Prep encourages practice-oriented preparation for the open-book examination. Candidates can strengthen reference-navigation skills by identifying the subject of a question, selecting the correct reference, locating the controlling provision, and applying it efficiently.\u003c\/p\u003e\n\n\u003cp\u003eProfessionals working with electrically operated doors and gates often bring practical experience with motors, controls, sensors, operator panels, safety devices, branch-circuit connections, and troubleshooting. Structured study helps connect that field experience with the precise NEC and Washington requirements tested on the examination.\u003c\/p\u003e\n\n\u003cp\u003eWashington-specific preparation is especially important for the 10 specialty because the classification contains clear boundaries involving system type, Class 2 work, branch circuits, voltage and amperage, conductor length, panel location, and prohibited line-voltage work. Understanding these limits supports both examination preparation and future work within the specialty.\u003c\/p\u003e\n\n\u003cp\u003eThe goal is to combine practical field experience with organized code study, stronger regulatory knowledge, effective reference navigation, and confidence-building preparation. This Washington Door, Gate \u0026amp; Similar Systems Master Electrician Book Package provides the core references needed to support that process.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eWhat is the Washington classification for Door, Gate \u0026amp; Similar Systems?\u003c\/h2\u003e\n\n\u003cp\u003eWashington identifies Door, Gate \u0026amp; Similar Systems as electrical specialty classification \u003cstrong\u003e10\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eWhat books are included in this package?\u003c\/h2\u003e\n\n\u003cp\u003eThis package includes \u003cstrong\u003eRCW Chapter 19.28\u003c\/strong\u003e, \u003cstrong\u003eWAC Chapter 296-46B\u003c\/strong\u003e, and the \u003cstrong\u003e2020 National Electrical Code\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eIs the Washington Door, Gate \u0026amp; Similar Systems Master Electrician exam open book?\u003c\/h2\u003e\n\n\u003cp\u003eYes. Washington electrical examinations are open book under the applicable testing rules.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eHow many questions are on the Master Electrician examination?\u003c\/h2\u003e\n\n\u003cp\u003eThe examination includes approximately \u003cstrong\u003e34 NEC \u0026amp; Theory questions\u003c\/strong\u003e and \u003cstrong\u003e20 Washington Codes questions\u003c\/strong\u003e, for approximately 54 questions total.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eHow much testing time is allowed?\u003c\/h2\u003e\n\n\u003cp\u003eThe NEC \u0026amp; Theory section allows approximately 2 hours, and the Washington Codes section allows approximately 1 hour.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eWhat score is required to pass?\u003c\/h2\u003e\n\n\u003cp\u003eWashington requires a score of at least \u003cstrong\u003e70%\u003c\/strong\u003e on each required examination section.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eHow long must I hold the specialty Electrician certificate before taking the Master examination?\u003c\/h2\u003e\n\n\u003cp\u003eA specialty Master Electrician applicant must have been certified by Washington Labor \u0026amp; Industries in the applicable specialty for at least \u003cstrong\u003etwo years\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eHow much experience is required for the underlying specialty Electrician certification?\u003c\/h2\u003e\n\n\u003cp\u003eFull Door, Gate \u0026amp; Similar Systems Electrician certification requires \u003cstrong\u003e2,000 hours of qualifying work experience\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eWhen can a trainee become eligible for the specialty Electrician examination?\u003c\/h2\u003e\n\n\u003cp\u003eA trainee may become eligible for the Door, Gate \u0026amp; Similar Systems specialty examination after completing at least \u003cstrong\u003e720 hours of qualifying work experience\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eWhat supervision applies before passing the specialty examination?\u003c\/h2\u003e\n\n\u003cp\u003eA trainee must remain under \u003cstrong\u003e100 percent supervision\u003c\/strong\u003e until successfully completing the applicable specialty examination.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eWhat systems are included in the specialty?\u003c\/h2\u003e\n\n\u003cp\u003eThe specialty includes qualifying electric gates, doors, windows, awnings, movable partitions, curtains, operator controls, sensors, control panels, and similar electrical operator systems.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eWhat limits apply to branch circuits originating at the operator control panel?\u003c\/h2\u003e\n\n\u003cp\u003eQualifying branch circuits originating in a listed operator control panel may not exceed \u003cstrong\u003e600 volts and 20 amperes\u003c\/strong\u003e, must supply only qualifying system components, and the supplied component must be within sight of the listed control panel.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eCan line-voltage power be reconnected to an operator control panel?\u003c\/h2\u003e\n\n\u003cp\u003eYes, when the applicable Washington requirements are met, including no modification to branch-circuit or feeder characteristics, a maximum of 600 volts and 20 amperes, and a conductor or conduit run from the disconnecting means or junction box of no more than six feet.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eCan this specialty install new services, feeders, or panelboards?\u003c\/h2\u003e\n\n\u003cp\u003eNo. The specialty does not authorize installation, repair, or replacement of services, feeders, panelboards, disconnect switches, or line-voltage branch-circuit conductors supplying the operator control panel.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eCan I use the 2020 NEC during the examination?\u003c\/h2\u003e\n\n\u003cp\u003eYes. The Washington electrical examination covered by this package permits the \u003cstrong\u003e2020 National Electrical Code\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eCan I bring RCW 19.28 and WAC 296-46B into the examination?\u003c\/h2\u003e\n\n\u003cp\u003eYes. Printed copies of both Washington electrical references may be used when prepared according to Labor \u0026amp; Industries examination requirements.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eWho administers the Washington Door, Gate \u0026amp; Similar Systems Master Electrician examination?\u003c\/h2\u003e\n\n\u003cp\u003eWashington electrical examinations are administered through \u003cstrong\u003ePSI\u003c\/strong\u003e after the applicable examination approval through Washington Labor \u0026amp; Industries.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eWhat should I focus on while studying?\u003c\/h2\u003e\n\n\u003cp\u003eFocus on wiring methods, overcurrent protection, grounding and bonding, motors, electrical equipment, special conditions, general electrical theory, specialty-scope limitations, Master Electrician responsibilities, and Washington electrical laws and rules.\u003c\/p\u003e\n\n","brand":"1 Exam Prep","offers":[{"title":"Default Title","offer_id":46541769441337,"sku":null,"price":295.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1789\/0861\/files\/WA-DOORSYSTEMSMASTERELECTRICIAN-BOOKS.jpg?v=1789758919","url":"https:\/\/1examprep.com\/products\/washington-door-gate-similar-systems-master-electrician-book-package","provider":"1 Exam Prep","version":"1.0","type":"link"}