{"product_id":"washington-limited-electrician-book-package","title":"Washington Limited Electrician Book Package","description":"\u003ch1 style=\"color: #d32f2f;\"\u003eWashington Limited Electrician Book Package\u003c\/h1\u003e\n\n\u003cp\u003ePrepare for the Washington Limited Energy Electrician examination with a focused book package built around the electrical code, Washington electrical law, and state administrative rules used for the \u003cstrong\u003e06 Limited Energy specialty\u003c\/strong\u003e. This package includes the \u003cstrong\u003eRevised Code of Washington (RCW) Chapter 19.28\u003c\/strong\u003e, \u003cstrong\u003eWashington Administrative Code (WAC) Chapter 296-46B\u003c\/strong\u003e, and the \u003cstrong\u003eNational Electrical Code, NEC, 2020 Edition\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003cp\u003eWashington officially identifies this specialty as \u003cstrong\u003e06 Limited Energy\u003c\/strong\u003e. It covers the installation, repair, replacement, and maintenance of signaling and power-limited circuits and related equipment. The scope includes telecommunications, low-voltage HVAC and refrigeration wiring, fire protection signaling systems, intrusion alarms, energy management and control systems, industrial and automation controls, lighting control systems, amplified sound systems, public address systems, and similar low-energy electrical systems.\u003c\/p\u003e\n\n\u003cp\u003eWashington electrical examinations are \u003cstrong\u003eopen book\u003c\/strong\u003e. Candidates may use approved references during testing, which makes efficient navigation of the NEC, RCW, and WAC an important part of exam preparation. A candidate should be able to recognize whether a question involves a technical NEC requirement, Washington licensing law, or a state administrative rule and then locate the applicable provision efficiently.\u003c\/p\u003e\n\n\u003cp\u003eThe Limited Energy specialty is restricted primarily to low-voltage circuits, but Washington rules also provide narrowly defined allowances for certain line-voltage connections inside control cabinets and equipment. Candidates should understand these limitations because specialty certification does not provide unrestricted authority to perform general line-voltage electrical work.\u003c\/p\u003e\n\n\u003cp\u003eThis package brings together the three core references needed to prepare for both the technical and Washington-specific portions of the examination. The NEC provides national installation requirements, RCW Chapter 19.28 establishes Washington electrical law, and WAC Chapter 296-46B defines the Limited Energy specialty while addressing certification, supervision, examinations, permits, inspections, contractors, and electrical installations.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eWhat You Get\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRevised Code of Washington (RCW) Chapter 19.28\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eWashington's electrical law covering electricians, electrical trainees, electrical contractors, certification, installations, enforcement, responsibilities, and other statutory requirements affecting electrical work throughout the state.\u003c\/span\u003e\n\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWashington Administrative Code (WAC) Chapter 296-46B\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eWashington's detailed electrical safety, administration, certification, examination, specialty-scope, permit, inspection, contractor, supervision, and installation rules. This reference defines the 06 Limited Energy specialty and its authorized scope.\u003c\/span\u003e\n\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNational Electrical Code, NEC, 2020 Edition\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eThe electrical code edition used for the Washington examination program covered by this package. It provides technical requirements for power-limited circuits, communications systems, wiring methods, grounding and bonding, overcurrent protection, hazardous locations, special equipment, and special conditions.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eUsing these references together can help candidates understand how national electrical requirements interact with Washington's specialty licensing system. The NEC may determine how a low-voltage circuit must be installed, while Washington rules determine whether that installation falls within the 06 Limited Energy scope.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eExam Details\u003c\/h2\u003e\n\n\u003cp\u003eThe Washington \u003cstrong\u003e06 Limited Energy Electrician\u003c\/strong\u003e examination is divided into two required sections: \u003cstrong\u003eNEC \u0026amp; Theory\u003c\/strong\u003e and \u003cstrong\u003eWashington Codes\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNEC \u0026amp; Theory:\u003c\/strong\u003e Approximately 34 questions\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTime Allowed for NEC \u0026amp; Theory:\u003c\/strong\u003e 2 hours\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWashington Codes:\u003c\/strong\u003e Approximately 17 questions\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTime Allowed for Washington Codes:\u003c\/strong\u003e 1 hour\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTotal Questions:\u003c\/strong\u003e Approximately 51 questions across both sections\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTotal Testing Time:\u003c\/strong\u003e Approximately 3 hours across both sections\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePassing Score:\u003c\/strong\u003e 70% or greater on each required examination section\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExam Type:\u003c\/strong\u003e Open book\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTesting Provider:\u003c\/strong\u003e PSI\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Code Reference:\u003c\/strong\u003e National Electrical Code, NEC, 2020 Edition\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe published NEC \u0026amp; Theory outline includes approximately one question from NEC Article 90, two from NEC Articles 100 through 110, one from wiring and protection, three from overcurrent protection, three from grounding and bonding, five from wiring methods, three from electrical equipment, one from motors and related equipment, two from hazardous locations, one from special equipment, six from special conditions, three from communications systems, and approximately three questions involving general trade knowledge and theory.\u003c\/p\u003e\n\n\u003cp\u003eThe Washington Codes section contains approximately 17 questions involving Washington electrical laws and rules. Candidates should be familiar with specialty scope, certification requirements, trainee supervision, contractor responsibilities, permits, inspections, examination requirements, and other provisions contained in RCW Chapter 19.28 and WAC Chapter 296-46B.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eOpen Book Test\u003c\/h2\u003e\n\n\u003cp\u003eThe Washington Limited Energy Electrician examination is an \u003cstrong\u003eopen book test\u003c\/strong\u003e. Washington Labor \u0026amp; Industries permits approved reference materials in the testing center under established examination rules.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003e2020 National Electrical Code\u003c\/strong\u003e may be used. Permanent index tabs are acceptable, while removable tabs, sticky notes, and handwritten notes are prohibited. Original copyrighted references may contain highlighting, underlining, and permanent index tabs when they otherwise comply with testing requirements.\u003c\/p\u003e\n\n\u003cp\u003ePrinted copies of \u003cstrong\u003eRCW Chapter 19.28\u003c\/strong\u003e and \u003cstrong\u003eWAC Chapter 296-46B\u003c\/strong\u003e may also be brought into the examination. Printed state electrical laws and rules should be prepared according to Washington testing requirements, including placement in a three-ring binder.\u003c\/p\u003e\n\n\u003cp\u003eBecause the NEC \u0026amp; Theory section allows approximately two hours for 34 questions, candidates should practice finding frequently tested topics quickly. Familiarity with wiring methods, power-limited circuits, communications systems, grounding and bonding, hazardous locations, and special conditions can make open-book testing more efficient.\u003c\/p\u003e\n\n\u003cp\u003eWashington-code questions require the same preparation. Candidates should be able to locate the 06 Limited Energy specialty scope, trainee supervision requirements, certification rules, and other Washington-specific provisions without relying on a long search for every answer.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eLicensing Steps\u003c\/h2\u003e\n\n\u003cp\u003eWashington Limited Energy Electrician certification is administered by the \u003cstrong\u003eWashington State Department of Labor \u0026amp; Industries\u003c\/strong\u003e. Candidates must complete the applicable experience and education requirements before qualifying for the 06 specialty electrician examination.\u003c\/p\u003e\n\n\u003col\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBegin through an electrical trainee or qualifying experience pathway.\u003c\/strong\u003e Candidates generally gain supervised Limited Energy work experience before applying for examination.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAccumulate 4,000 hours of qualifying Limited Energy experience.\u003c\/strong\u003e Washington requires 4,000 hours for the 06 specialty.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWork under appropriate supervision.\u003c\/strong\u003e Trainees performing Limited Energy work must be supervised by an electrician certified for the work being performed or by a general journey level electrician.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMeet the minimum supervision requirement.\u003c\/strong\u003e Washington requires trainees in 4,000-hour specialties to be supervised at least 75 percent of the time.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eComplete required classroom instruction.\u003c\/strong\u003e Candidates in the 4,000-hour specialty pathway must complete 48 hours of qualifying basic classroom instruction.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDocument work experience.\u003c\/strong\u003e Qualifying electrical work hours must be properly recorded and verified according to Labor \u0026amp; Industries requirements.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApply for examination eligibility.\u003c\/strong\u003e Submit the required electrician examination application and supporting documentation to Washington Labor \u0026amp; Industries.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReceive approval before scheduling.\u003c\/strong\u003e Electrician candidates must receive the applicable L\u0026amp;I approval before registering for the PSI examination.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTake the NEC \u0026amp; Theory and Washington Codes sections.\u003c\/strong\u003e Prepare with the NEC, RCW, and WAC and complete both required examination sections.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eComplete certification requirements.\u003c\/strong\u003e After satisfying examination, experience, and education requirements, follow Washington procedures for issuance of the 06 Limited Energy Electrician certificate.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eState Requirements\u003c\/h2\u003e\n\n\u003cp\u003eWashington identifies Limited Energy as electrical specialty classification \u003cstrong\u003e06\u003c\/strong\u003e. The classification requires \u003cstrong\u003e4,000 hours of qualifying electrical work experience\u003c\/strong\u003e before an applicant qualifies for certification and examination under the standard pathway.\u003c\/p\u003e\n\n\u003cp\u003eTrainees working in the 06 specialty must be supervised by a specialty electrician certified to perform the work being done or by a general journey level electrician. Washington requires supervision at least \u003cstrong\u003e75 percent of the time\u003c\/strong\u003e for the 4,000-hour specialty classifications.\u003c\/p\u003e\n\n\u003cp\u003eCandidates must also complete \u003cstrong\u003e48 hours of basic classroom instruction\u003c\/strong\u003e as part of the qualification requirements for examination or applicable trainee renewal requirements.\u003c\/p\u003e\n\n\u003cp\u003eThe Limited Energy specialty covers the installation, repair, replacement, and maintenance of signaling and power-limited circuits and related equipment. The classification is restricted to low-voltage circuits except for specific limited allowances established by Washington rules.\u003c\/p\u003e\n\n\u003cp\u003eSystems included within the specialty include telecommunications, low-voltage HVAC and refrigeration wiring, fire protection signaling, intrusion alarms, energy management systems, industrial and automation controls, lighting controls, commercial and residential amplified sound, public address systems, and similar low-energy circuits and equipment in all occupancies and locations.\u003c\/p\u003e\n\n\u003cp\u003eWashington permits limited line-voltage work when a line-voltage connection is removed and reconnected to a replacement component inside a control cabinet. The replacement must be like-in-kind or a manufacturer-authorized replacement component. The applicable circuit is limited to \u003cstrong\u003e120 volts and 20 amperes maximum\u003c\/strong\u003e and must have a means of disconnect.\u003c\/p\u003e\n\n\u003cp\u003eThe 06 specialty may also repair or replace line-voltage connections terminated inside a cabinet to internal low-voltage equipment power supplies when the characteristics of the branch circuit or feeder load are not modified. The specialty may not replace or modify the line-voltage circuit or cabling or alter the method by which the line-voltage circuit connects to the power supply or control cabinet.\u003c\/p\u003e\n\n\u003cp\u003eWashington also allows Limited Energy electrical contractors to perform telecommunications work under the 06 electrical license and corresponding administrator or master electrician certificate.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eReference Books\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRevised Code of Washington (RCW) Chapter 19.28\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eThis reference contains Washington electrical statutes governing electricians, trainees, contractors, certification, installations, enforcement, and related responsibilities. It is an important source for understanding Washington's electrical licensing system.\u003c\/span\u003e\n\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWashington Administrative Code (WAC) Chapter 296-46B\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eThis reference contains specialty classifications, trainee supervision requirements, examination rules, certification procedures, permits, inspections, contractor requirements, telecommunications provisions, and Washington-specific electrical requirements. Candidates should study the 06 Limited Energy scope closely.\u003c\/span\u003e\n\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNational Electrical Code, NEC, 2020 Edition\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eThe NEC provides technical requirements for wiring methods, communications systems, power-limited circuits, fire alarm systems, grounding and bonding, overcurrent protection, electrical equipment, hazardous locations, special equipment, and special conditions relevant to Limited Energy installations.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThese references are most useful when studied as a coordinated set. Candidates should understand both the technical NEC requirement and the Washington rule that determines whether the work is authorized under specialty 06.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eExam Room Approved Books\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNational Electrical Code, NEC, 2020 Edition\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eThe 2020 NEC is permitted during Washington electrical examinations. Permanent index tabs, highlighting, and underlining are allowed under examination rules, while handwritten notes, removable tabs, and sticky notes are prohibited.\u003c\/span\u003e\n\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRevised Code of Washington (RCW) Chapter 19.28\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003ePrinted copies of Washington electrical law may be used during the examination when prepared according to Labor \u0026amp; Industries testing requirements.\u003c\/span\u003e\n\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWashington Administrative Code (WAC) Chapter 296-46B\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003ePrinted copies of Washington electrical rules may be used during testing and should be prepared according to applicable examination requirements.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003ePracticing with the same references before examination day can help candidates become more comfortable with the layout, terminology, and location of commonly tested information.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eTest Information and Study Materials\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003eWiring Methods:\u003c\/strong\u003e Wiring methods are an important portion of the Limited Energy Electrician examination. Review cables, raceways, boxes, fittings, supports, separation requirements, conductor protection, plenum applications, riser applications, and permitted installation methods.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSpecial Conditions:\u003c\/strong\u003e The examination outline places significant emphasis on special conditions. Study NEC requirements that affect interconnected systems, controls, energy systems, power-limited circuits, and other specialized electrical installations.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCommunications Systems:\u003c\/strong\u003e Review communications cabling, grounding, bonding, protection, routing, equipment, and installation requirements. Communications knowledge is particularly relevant because telecommunications work falls within the 06 specialty.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eGrounding and Bonding:\u003c\/strong\u003e Study grounding and bonding requirements for communications systems, low-voltage equipment, raceways, cabinets, enclosures, and related electrical systems.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eOvercurrent Protection:\u003c\/strong\u003e Review conductor protection, overcurrent devices, branch circuits, power supplies, and the relationship between low-voltage equipment and the line-voltage circuits supplying it.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eHazardous Locations:\u003c\/strong\u003e The examination includes hazardous-location content. Candidates should understand classified-location concepts and recognize when special wiring methods or equipment requirements apply.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFire Protection Signaling and Alarm Systems:\u003c\/strong\u003e Review power-limited fire alarm circuits, wiring methods, separation requirements, equipment, power supplies, signaling concepts, and related electrical requirements.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eGeneral Trade Knowledge and Theory:\u003c\/strong\u003e Practice voltage, current, resistance, power, Ohm's law, basic circuit relationships, system operation, wiring principles, and trade mathematics associated with Limited Energy work.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWashington Specialty Scope:\u003c\/strong\u003e Know exactly which systems fall within classification 06 and understand the narrow line-voltage allowances. Scope questions are important because specialty electricians must remain within the work authorized by their certification.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWashington Laws and Rules:\u003c\/strong\u003e Review experience requirements, trainee supervision, certification, examinations, permits, inspections, contractor licensing, specialty limits, and Washington-specific electrical requirements.\u003c\/p\u003e\n\n\u003cp\u003eA practical study approach is to divide practice questions into NEC, RCW, and WAC categories. Before opening a reference, determine which source most likely controls the question. Then locate the applicable section and check for any Washington-specific limitation or exception.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eHow 1 Exam Prep Helps You Reach Your Goal\u003c\/h2\u003e\n\n\u003cp\u003e1 Exam Prep helps Washington Limited Energy Electrician candidates organize preparation around the three primary references in this package: the \u003cstrong\u003e2020 National Electrical Code\u003c\/strong\u003e, \u003cstrong\u003eRCW Chapter 19.28\u003c\/strong\u003e, and \u003cstrong\u003eWAC Chapter 296-46B\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003cp\u003eThe package supports trade-focused review of wiring methods, communications systems, fire protection signaling, grounding and bonding, overcurrent protection, hazardous locations, special conditions, electrical theory, and Washington-specific Limited Energy requirements.\u003c\/p\u003e\n\n\u003cp\u003e1 Exam Prep encourages candidates to develop practical reference-navigation skills for the open-book examination. Candidates can practice reading a question, identifying the likely source, locating the applicable code or rule, and applying it efficiently.\u003c\/p\u003e\n\n\u003cp\u003eTrade-focused preparation can help connect field experience with precise code requirements. Limited Energy technicians may already understand how systems are installed, but examination preparation helps reinforce the exact NEC and Washington provisions that govern those installations.\u003c\/p\u003e\n\n\u003cp\u003eWashington-specific study is particularly important because the 06 classification has defined limits. Candidates should understand which low-voltage systems are included, when limited line-voltage work is permitted, and when another electrical certification is required.\u003c\/p\u003e\n\n\u003cp\u003eThe goal is to combine hands-on Limited Energy experience with organized study, stronger code familiarity, Washington regulatory knowledge, and efficient use of approved references. This Washington Limited Electrician Book Package provides the core materials needed to build that preparation structure.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eWhat is the Washington Limited Energy Electrician classification?\u003c\/h2\u003e\n\n\u003cp\u003eWashington identifies Limited Energy as electrical specialty classification \u003cstrong\u003e06\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eWhat books are included in this package?\u003c\/h2\u003e\n\n\u003cp\u003eThis package includes \u003cstrong\u003eRCW Chapter 19.28\u003c\/strong\u003e, \u003cstrong\u003eWAC Chapter 296-46B\u003c\/strong\u003e, and the \u003cstrong\u003e2020 National Electrical Code\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eIs the Washington Limited Energy Electrician exam open book?\u003c\/h2\u003e\n\n\u003cp\u003eYes. Washington electrical examinations are open book under the applicable testing rules.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eHow many questions are on the Limited Energy Electrician examination?\u003c\/h2\u003e\n\n\u003cp\u003eThe published examination outline lists approximately \u003cstrong\u003e34 NEC \u0026amp; Theory questions\u003c\/strong\u003e and \u003cstrong\u003e17 Washington Codes questions\u003c\/strong\u003e, for approximately 51 questions total.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eHow much time is allowed?\u003c\/h2\u003e\n\n\u003cp\u003eThe NEC \u0026amp; Theory section allows approximately 2 hours, and the Washington Codes section allows approximately 1 hour.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eWhat score is required to pass?\u003c\/h2\u003e\n\n\u003cp\u003eWashington requires a score of at least \u003cstrong\u003e70%\u003c\/strong\u003e on each required examination section.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eHow much work experience is required?\u003c\/h2\u003e\n\n\u003cp\u003eWashington requires \u003cstrong\u003e4,000 hours of qualifying work experience\u003c\/strong\u003e for the 06 Limited Energy specialty.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eIs classroom instruction required?\u003c\/h2\u003e\n\n\u003cp\u003eYes. Candidates in the 4,000-hour specialty pathway must complete \u003cstrong\u003e48 hours of qualifying basic classroom instruction\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eWhat supervision is required for Limited Energy trainees?\u003c\/h2\u003e\n\n\u003cp\u003eTrainees must work under an appropriately certified specialty electrician or general journey level electrician and be supervised at least \u003cstrong\u003e75 percent of the time\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eWhat systems are included in the Limited Energy specialty?\u003c\/h2\u003e\n\n\u003cp\u003eThe 06 specialty includes signaling and power-limited circuits, telecommunications, low-voltage HVAC and refrigeration wiring, fire protection signaling, intrusion alarms, energy management, automation controls, lighting controls, sound systems, public address systems, and similar low-energy systems.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eCan a Limited Energy Electrician perform line-voltage work?\u003c\/h2\u003e\n\n\u003cp\u003eThe specialty is primarily restricted to low-voltage circuits. Washington allows certain narrowly defined line-voltage repair and reconnection activities inside control cabinets, subject to specific voltage, amperage, and equipment limitations.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eCan a Limited Energy contractor perform telecommunications work?\u003c\/h2\u003e\n\n\u003cp\u003eYes. Washington permits properly licensed 06 Limited Energy electrical contractors to perform telecommunications work under the Limited Energy specialty.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eCan I bring the 2020 NEC into the examination?\u003c\/h2\u003e\n\n\u003cp\u003eYes. The 2020 NEC may be used during Washington electrical examinations under the applicable testing rules.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eCan I bring RCW 19.28 and WAC 296-46B into the exam?\u003c\/h2\u003e\n\n\u003cp\u003eYes. Printed copies of both Washington references may be used when prepared according to Labor \u0026amp; Industries testing requirements.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eWho administers the Washington Limited Energy Electrician examination?\u003c\/h2\u003e\n\n\u003cp\u003eWashington electrical examinations are administered through \u003cstrong\u003ePSI\u003c\/strong\u003e after the applicable eligibility and approval process through Washington Labor \u0026amp; Industries.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eWhat should I focus on while studying?\u003c\/h2\u003e\n\n\u003cp\u003eFocus on wiring methods, communications systems, grounding and bonding, overcurrent protection, hazardous locations, fire protection signaling, special conditions, electrical theory, Limited Energy specialty scope, and Washington electrical laws and rules.\u003c\/p\u003e\n\n","brand":"1 Exam Prep","offers":[{"title":"Default Title","offer_id":46541286375481,"sku":null,"price":295.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1789\/0861\/files\/WA-LIMITEDELECTRICIAN-BOOKS.jpg?v=1789744652","url":"https:\/\/1examprep.com\/products\/washington-limited-electrician-book-package","provider":"1 Exam Prep","version":"1.0","type":"link"}