Arizona Ceramic, Plastic and Metal Tile Residential / Commercial Contractor (CR-48) Books Allowed into Exam Package

The Arizona Ceramic, Plastic and Metal Tile Residential / Commercial Contractor (CR-48) Books Allowed into Exam Package is designed for candidates preparing for the Arizona CR-48 ceramic, plastic, and metal tile residential/commercial contractor examination. This package focuses on the books allowed into the exam room, helping candidates study with the same references used during the open-book testing session.

Tile contracting requires more than the ability to set tile neatly. Contractors must understand surface preparation, layout, substrates, adhesives, mortar beds, membranes, movement joints, grout, finishing, safety practices, and code requirements that affect residential and commercial tile installation. The CR-48 exam is built around those responsibilities and requires candidates to combine field knowledge with reference-navigation skill.

This package includes Code of Federal Regulations - 29 CFR Part 1926 (OSHA), International Residential Code for One- and Two-Family Dwellings, 2018, ANSI A108/A118/A136.1:2017, American National Standard Specifications for the Installation of Ceramic Tile, 2017, and Handbook for Ceramic, Glass, and Stone Tile Installation, 2017. These references support preparation in construction safety, residential code requirements, tile installation standards, setting materials, grout, adhesives, substrates, waterproofing coordination, shower and tub areas, and tile system selection.

The Arizona CR-48 examination is open book, but candidates should not rely on the books alone. Open-book contractor exams require organization, repetition, and reference-navigation practice. A candidate must know which book to use, where major subjects are located, how to work through technical installation language, and how to find the correct requirement while staying within the exam time limit.

This books allowed into exam package is a practical choice for tile contractors, residential and commercial finish contractors, remodeling contractors, shower and bath renovation professionals, flooring and wall tile installers, qualifying party applicants, project managers, estimators, field supervisors, and experienced tradespeople preparing for Arizona contractor licensing. It provides the core exam-room references needed to build a focused study plan around the CR-48 tile contractor exam.

What You Get

• Code of Federal Regulations - 29 CFR Part 1926 (OSHA) — a construction safety reference used to study OSHA standards for jobsite safety, personal protective equipment, silica-related work awareness, ladders, scaffolds, fall protection, hand and power tools, material handling, hazard recognition, and safe construction practices.
• International Residential Code for One- and Two-Family Dwellings, 2018 — a residential code reference used to study one- and two-family dwelling requirements that may affect tile work, including floors, walls, wet areas, shower and tub areas, construction documents, fire and safety provisions, and residential building requirements.
• ANSI A108/A118/A136.1:2017, American National Standard Specifications for the Installation of Ceramic Tile, 2017 — a tile installation standards reference used to study installation methods, materials, setting standards, adhesives, mortars, grouts, substrate preparation, and performance requirements for ceramic tile systems.
• Handbook for Ceramic, Glass, and Stone Tile Installation, 2017 — a tile industry handbook used to study tile installation methods, assemblies, substrate conditions, wet area applications, movement joints, membranes, floor and wall systems, glass tile, stone tile, and system selection guidance.

Exam Details

The Arizona Ceramic, Plastic and Metal Tile Residential / Commercial Contractor (CR-48) examination is connected to the dual residential/commercial contractor classification for ceramic, plastic, and metal tile work. The exam is administered through PSI for candidates pursuing the CR-48 contractor license path through the Arizona Registrar of Contractors.

The CR-48 examination contains 80 questions. Candidates are given 180 minutes to complete the exam. The minimum passing score is 70%. The examination may include questions based on the listed references, trade knowledge, and general industry practices.

The CR-48 content outline includes Plan Reading and Estimating, General Tile Knowledge, Grout and Finishing, Adhesives, Tile Installation, and Safety and Employee Protection. Tile installation is the largest content area, followed by general tile knowledge. Candidates should spend significant study time on installation methods, setting materials, surface preparation, substrates, tile types, and the correct use of tile standards.

The CR-48 classification allows the licensee to prepare a surface as required to install or repair tile products on horizontal and vertical surfaces. Covered products include ceramic, clay, faience, metal, mosaic, glass mosaic, paver, plastic, quarry, stone tiles such as marble or slate, and terrazzo. Installation of shower doors and tub enclosures is included when it is part of the original contract.

Because this is a residential/commercial classification, candidates should understand how tile work may appear in both dwelling and commercial-style project settings. Residential tile work often involves bathrooms, kitchens, laundry areas, showers, tub surrounds, floors, backsplashes, countertops, and exterior surfaces where permitted by the system. Commercial tile work may involve larger floor areas, wall installations, wet areas, movement joints, heavier use conditions, and coordination with project specifications.

The ANSI A108/A118/A136.1:2017 reference is especially important for installation standards. Candidates should review standards related to ceramic tile installation, setting materials, organic adhesives, dry-set mortars, modified mortars, grouts, surface preparation, mortar bed work, installation tolerances, and installation method requirements. ANSI questions often require careful reading because the correct answer may depend on the installation method, substrate, material type, or system condition described in the question.

The Handbook for Ceramic, Glass, and Stone Tile Installation, 2017 supports method selection and system understanding. Candidates should become familiar with how the handbook organizes floor, wall, wet area, exterior, membrane, glass tile, and stone tile applications. The handbook helps candidates connect a project condition to a recognized tile installation method.

The International Residential Code for One- and Two-Family Dwellings, 2018 supports residential code questions that may affect tile work. Candidates should understand the structure of the IRC and review residential construction provisions connected to floors, walls, moisture-prone areas, shower and tub areas, building planning, and other dwelling requirements related to tile installation conditions.

The OSHA reference supports construction safety questions. Tile contractors may work around dust, cutting tools, mixers, grinders, wet saws, ladders, scaffolds, heavy materials, demolition areas, and active construction sites. Safety preparation should be treated as a real part of the exam, not an afterthought.

Open Book Test

The Arizona Ceramic, Plastic and Metal Tile Residential / Commercial Contractor (CR-48) exam is an open book test. Candidates are responsible for bringing their own approved references to the examination center. The books in this package are allowed into the exam room for the CR-48 ceramic, plastic, and metal tile residential/commercial examination.

Reference materials may be highlighted, underlined, annotated, and indexed before the examination session. Candidates may not write, highlight, underline, or index in the references during the exam. Books should be organized before test day so they can be used efficiently while following PSI exam-room rules.

Additional loose papers are not permitted with approved references. Loose notes, loose sheets, and attached extra pages are not allowed. References may be tabbed or indexed with permanent tabs only. Temporary tabs, including removable note-style tabs, are not allowed and must be removed before the examination begins.

A silent, nonprinting, non-programmable calculator is permitted in the examination center. Candidates should practice using their calculator and approved references during study so they are comfortable working with estimating questions, layout concepts, coverage calculations, standards, tables, code sections, and safety requirements.

Open-book preparation should focus on speed, organization, and accuracy. Candidates should know where to find tile installation methods, adhesive requirements, grout and finishing provisions, substrate preparation standards, wet area methods, movement joint information, residential code requirements, and OSHA construction safety standards.

Licensing Steps

Arizona contractor licensing is handled by the Arizona Registrar of Contractors. Candidates should begin by identifying the correct classification for the work they intend to perform. For both residential and commercial ceramic, plastic, and metal tile work, the CR-48 residential/commercial contractor classification is the path connected to this exam package.

The qualifying party is the individual responsible for meeting the trade knowledge requirement for the license classification. This person demonstrates the experience, knowledge, and skill required for the classification. The qualifying party should make sure the selected examination matches the CR-48 residential/commercial classification being pursued.

Arizona contractor applicants may also need to complete the Arizona Statutes and Rules Exam, commonly known as the SRE. The SRE covers Arizona contractor statutes and rules related to licensing, business conduct, contractor responsibilities, compliance, and regulatory requirements. New applicants should review Arizona Registrar of Contractors requirements for their qualifying party status and selected license classification.

For the trade examination, candidates follow PSI scheduling procedures and select the correct Arizona CR-48 Ceramic, Plastic and Metal Tile Residential / Commercial Contractor examination. PSI provides instructions for registration, scheduling, identification, cancellation, test center rules, remote proctoring options where available, and exam-day conduct.

After completing the required examination steps, applicants submit the license application and required documents to the Arizona Registrar of Contractors. Application processing may include qualifying party information, business entity information, background information, bonding, required fees, and other documentation required for the selected residential/commercial contractor classification.

Candidates should keep their original score report and related examination records. Licensing applications must be submitted within the applicable time period after passing the required examination, and exam records may be needed during application processing.

State Requirements

The Arizona Registrar of Contractors licenses and regulates contractors performing residential and commercial construction work in Arizona. Arizona issues residential licenses, commercial licenses, and dual residential/commercial licenses depending on the classification and scope of work. The CR-48 classification is the residential/commercial path for ceramic, plastic, and metal tile contractor work.

The CR-48 classification is intended for contractors performing tile work within the limits of the Arizona classification. It includes preparing surfaces as required for the installation or repair of ceramic, clay, faience, metal, mosaic, glass mosaic, paver, plastic, quarry, stone tile, marble, slate, and terrazzo products on horizontal and vertical surfaces.

Applicants should review current Arizona Registrar of Contractors requirements before applying. The licensing process can include trade examination requirements, the Arizona Statutes and Rules Exam, qualifying party documentation, business documentation, bonding, application forms, fees, and compliance with Arizona contractor licensing rules.

Tile work may also involve responsibilities beyond the contractor examination. Contractors should understand applicable building code requirements, approved construction documents, manufacturer installation instructions, tile industry standards, moisture management requirements, jobsite safety standards, and project-specific permitting or inspection requirements. This exam package supports preparation for the Arizona CR-48 trade exam, while actual work must be performed by properly qualified personnel following applicable law, code, and safety requirements.

Reference Books

• Code of Federal Regulations - 29 CFR Part 1926 (OSHA)
  This construction safety reference covers OSHA standards used to study jobsite safety, hazard recognition, employee protection, personal protective equipment, ladders, scaffolds, tools, dust-producing work, material handling, housekeeping, and safe construction work practices.
• International Residential Code for One- and Two-Family Dwellings, 2018
  The 2018 International Residential Code covers residential building requirements that may affect tile work in one- and two-family dwellings, including building planning, floors, walls, wet areas, shower and tub conditions, and residential safety provisions.
• ANSI A108/A118/A136.1:2017, American National Standard Specifications for the Installation of Ceramic Tile, 2017
  This ANSI reference covers ceramic tile installation standards, setting materials, adhesives, mortars, grouts, substrate preparation, installation methods, and technical requirements used to evaluate proper tile installation practices.
• Handbook for Ceramic, Glass, and Stone Tile Installation, 2017
  This tile industry handbook covers recognized installation methods for ceramic, glass, and stone tile systems, including floor, wall, wet area, membrane, movement joint, substrate, and system-selection guidance.

Exam Room Approved Books

• Code of Federal Regulations - 29 CFR Part 1926 (OSHA)
  Allowed into the exam room for the Arizona Ceramic, Plastic and Metal Tile Residential / Commercial Contractor (CR-48) examination. This reference supports OSHA construction safety and employee protection questions.
• International Residential Code for One- and Two-Family Dwellings, 2018
  Allowed into the exam room for the Arizona Ceramic, Plastic and Metal Tile Residential / Commercial Contractor (CR-48) examination. This reference supports residential code questions related to dwelling construction and tile installation conditions.
• ANSI A108/A118/A136.1:2017, American National Standard Specifications for the Installation of Ceramic Tile, 2017
  Allowed into the exam room for the Arizona Ceramic, Plastic and Metal Tile Residential / Commercial Contractor (CR-48) examination. This reference supports tile installation standards, adhesives, mortars, grout, substrates, and installation method questions.
• Handbook for Ceramic, Glass, and Stone Tile Installation, 2017
  Allowed into the exam room for the Arizona Ceramic, Plastic and Metal Tile Residential / Commercial Contractor (CR-48) examination. This reference supports installation method, system selection, wet area, floor, wall, glass tile, and stone tile questions.

Test Information and Study Materials

The Arizona CR-48 exam requires candidates to combine residential and commercial tile knowledge with reference-based exam preparation. Because the exam is open book, candidates should study directly from the references they plan to bring into the exam room. The goal is to understand the trade topics and know where important information is located.

Start with the tile standards. The ANSI A108/A118/A136.1 reference supports many questions involving setting materials, installation requirements, substrate preparation, grouts, adhesives, mortars, and acceptable methods. Candidates should become familiar with how ANSI separates installation standards from material specifications. This helps when a question asks about the way tile is installed versus the type of material being used.

The Handbook for Ceramic, Glass, and Stone Tile Installation is important for identifying installation methods and system requirements. Candidates should review floor methods, wall methods, wet area methods, membrane use, substrate conditions, movement joints, glass tile applications, stone tile considerations, and method-selection guidance. Many tile questions are easier to answer when the candidate can quickly connect a project condition to the correct handbook method.

The International Residential Code for One- and Two-Family Dwellings, 2018 supports residential code questions. Candidates should review residential building planning, floors, walls, showers, tub areas, moisture-related conditions, safety provisions, and code areas that affect the background conditions for tile installation. Even when a question feels trade-focused, the residential code may control the underlying requirement.

The OSHA reference supports safety-related exam questions. Candidates should review personal protective equipment, ladders, scaffolds, fall protection, hand and power tools, silica and dust awareness, material handling, housekeeping, electrical safety, hazard communication, and safe work practices. Tile contractors may cut, grind, mix, lift, demolish, and install materials in active construction environments, so safety preparation should be included in the study plan.

Because this is an open-book exam, candidates should prepare their references before the testing appointment. Permanent tabs can help identify important ANSI sections, handbook methods, IRC areas, OSHA safety topics, grout sections, adhesive sections, substrate preparation topics, wet area methods, and movement joint information. Highlighting and annotations should be completed before the examination session. Over-marking can make a reference harder to use, so candidates should focus on clear organization and the sections most likely to be needed during the test.

Practice should include timed questions and reference lookup. With 80 questions in 180 minutes, candidates have a little over two minutes per question. Some questions may be answered from trade knowledge, while others require reference navigation. A strong exam strategy is to answer familiar questions first, mark difficult questions, and return to them after making progress.

Candidates should also practice choosing the correct reference. OSHA safety questions generally belong in 29 CFR Part 1926. Residential dwelling and code-condition questions often belong in the IRC. Installation standard, adhesive, grout, mortar, and substrate preparation questions often belong in ANSI A108/A118/A136.1. Installation method and system-selection questions often belong in the Handbook for Ceramic, Glass, and Stone Tile Installation.

How 1 Exam Prep Helps You Reach Your Goal

1 Exam Prep helps Arizona contractor candidates prepare with organized study guidance, trade-focused review, practice-oriented preparation, and reference navigation support. For the Arizona Ceramic, Plastic and Metal Tile Residential / Commercial Contractor (CR-48) Books Allowed into Exam Package, the goal is to help students study with the correct exam-room references and build confidence using them before test day.

Many CR-48 candidates already have experience with tile installation, remodeling, shower work, flooring, wall tile, stone tile, or commercial finish work. The challenge is turning that experience into exam-ready knowledge. 1 Exam Prep supports that process by helping students focus on the subjects that matter most: tile installation, general tile knowledge, grout and finishing, adhesives, plan reading, estimating, residential code requirements, OSHA safety, and reference navigation.

Open-book exams require a specific preparation method. Candidates need to know how to search references quickly, how to identify the correct book for each question, and how to work through technical standards without getting stuck. 1 Exam Prep encourages students to practice with the books in hand, use permanent tabs where helpful, and develop a repeatable method for finding answers.

1 Exam Prep also helps students prepare with a realistic study structure. That includes reviewing the exam content areas, organizing the reference books, practicing timed questions, strengthening weak areas, and becoming comfortable with the test format. This approach supports serious preparation without promising a passing score, licensing approval, or guaranteed exam outcome.

FAQ: What books are included in this Arizona CR-48 exam package?

This package includes Code of Federal Regulations - 29 CFR Part 1926 (OSHA), International Residential Code for One- and Two-Family Dwellings, 2018, ANSI A108/A118/A136.1:2017, American National Standard Specifications for the Installation of Ceramic Tile, 2017, and Handbook for Ceramic, Glass, and Stone Tile Installation, 2017.

FAQ: Are these books allowed into the Arizona CR-48 exam room?

Yes. These references are allowed into the examination center for the Arizona Ceramic, Plastic and Metal Tile Residential / Commercial Contractor (CR-48) examination. Candidates must follow PSI rules for bound references, permanent tabs, highlighting, annotations, and exam-day use.

FAQ: Is the Arizona CR-48 Ceramic, Plastic and Metal Tile exam open book?

Yes. The Arizona CR-48 Ceramic, Plastic and Metal Tile Residential/Commercial Contractor trade exam is an open book test. Candidates are responsible for bringing their own approved references to the examination center.

FAQ: How many questions are on the Arizona CR-48 exam?

The CR-48 exam has 80 questions. Candidates are given 180 minutes, and the minimum passing score is 70%.

FAQ: What topics are covered on the CR-48 exam?

The exam covers plan reading and estimating, general tile knowledge, grout and finishing, adhesives, tile installation, and safety and employee protection.

FAQ: What tile products are included in the CR-48 classification?

The classification includes ceramic, clay, faience, metal, mosaic, glass mosaic, paver, plastic, quarry, stone tiles such as marble or slate, and terrazzo installed or repaired on horizontal and vertical surfaces.

FAQ: Why is ANSI A108/A118/A136.1 included?

ANSI A108/A118/A136.1 supports questions involving ceramic tile installation standards, adhesives, mortars, grouts, substrate preparation, and setting material requirements.

FAQ: Why is the Handbook for Ceramic, Glass, and Stone Tile Installation included?

The handbook supports questions involving recognized tile installation methods, system selection, wet areas, floor and wall applications, movement joints, membranes, glass tile, and stone tile installation.

FAQ: Can I write in my books during the exam?

No. Reference materials may be highlighted, underlined, annotated, and indexed before the examination session, but candidates may not write, highlight, underline, or index in the books during the exam.

FAQ: Who should use this CR-48 books allowed into exam package?

This package is designed for residential and commercial tile contractors, remodeling contractors, shower and bath renovation professionals, flooring and wall tile installers, qualifying party applicants, project managers, estimators, supervisors, and experienced tradespeople preparing for the Arizona CR-48 contractor exam.