Alabama Remodeling, Alteration, and Maintenance Repair Contractor - Highlighted and Tabbed Book Package

The Alabama Remodeling, Alteration, and Maintenance Repair Contractor - Highlighted and Tabbed Book Package provides the key construction references for candidates preparing for the Alabama Remodeling, Alteration, and Maintenance Repair Contractor examination. Every book in this package is highlighted and tabbed for exam preparation, helping candidates organize a broad range of remodeling, repair, carpentry, concrete, masonry, building-code, cabinetry, and construction-safety information.

Remodeling and alteration work can involve many construction disciplines within the same project. A contractor may need to understand structural framing, finish carpentry, doors and openings, concrete repairs, masonry, cabinets, interior finishes, jobsite safety, and applicable building-code requirements. The Alabama examination reflects this broad scope and requires candidates to prepare across several areas instead of concentrating on only one trade.

This package includes the Code of Federal Regulations - 29 CFR Part 1926 (OSHA); Carpentry and Building Construction, 2016; Finish Carpenter's Manual by Jim Tolpin, 1993; International Building Code, 2015; Design and Control of Concrete Mixtures, 17th Edition; Modern Masonry - Brick, Block, Stone by Clois E. Kicklighter; and The Complete Illustrated Guide to Furniture and Cabinet Construction, 2001.

The Alabama Remodeling, Alteration, and Maintenance Repair Contractor examination is an open-book test administered through PSI. An open-book format makes familiarity with the references especially important. Candidates should understand the construction concepts being tested while also knowing which reference is most likely to contain the information they need.

The highlighted and tabbed preparation helps create convenient navigation points throughout the books. Candidates can use the prepared references while studying to become familiar with major subjects, important sections, and the overall organization of each book before exam day.

Please allow up to 15 business days for tabbed and highlighted book package orders.

Exam Details

The Alabama Remodeling, Alteration, and Maintenance Repair Contractor examination is administered by PSI as part of the contractor licensing process overseen by the Alabama Licensing Board for General Contractors.

• Exam: Alabama Remodeling, Alteration, and Maintenance Repair Contractor
• Testing Provider: PSI
• Number of Questions: 60
• Time Allowed: 120 minutes
• Exam Type: Open book

The examination is designed around knowledge relevant to remodeling, alterations, repair, and building maintenance. Preparation can involve rough and finish carpentry, building components, doors and windows, cabinetry, concrete, masonry, safety, and code-related construction requirements.

With 60 questions and 120 minutes available, candidates have an average of approximately two minutes per question. That makes efficient reference navigation an important part of preparation. Knowing whether a question is likely to be answered through OSHA, the International Building Code, a carpentry manual, the concrete reference, or the masonry reference can reduce unnecessary searching.

Because remodeling work frequently involves existing structures, candidates should develop an understanding of how different construction systems interact. Altering an opening, repairing framing, replacing finish components, repairing concrete or masonry, or modifying an existing space can require knowledge that crosses traditional trade boundaries.

Open Book Test

The Alabama Remodeling, Alteration, and Maintenance Repair Contractor examination is an open-book test. Candidates may use approved reference materials during the examination in accordance with PSI testing rules.

This package is prepared with highlighting and permanent tabs to support reference navigation. Highlighting can make important information easier to recognize during study, while permanent tabs can provide faster access to major chapters and frequently reviewed subjects.

Open book does not mean candidates can depend on researching every question from the beginning. With approximately two minutes per question on average, familiarity with the references can make a significant difference in how effectively examination time is used.

A practical strategy is to learn which reference is most useful for each subject. OSHA should be familiar for questions involving construction safety. The International Building Code supports building-code topics. Carpentry and Building Construction provides broader information on building methods and framing, while Finish Carpenter's Manual supports detailed finish carpentry work.

Design and Control of Concrete Mixtures is useful for concrete materials and construction principles. Modern Masonry supports brick, block, stone, and masonry-related topics. The Complete Illustrated Guide to Furniture and Cabinet Construction provides additional support for cabinets, joinery, furniture construction, and woodworking methods.

Use the highlighted and tabbed books throughout preparation. Repeatedly opening to the same subjects helps candidates remember which book contains the information and where important topics are located.

Licensing Steps

The Alabama Licensing Board for General Contractors regulates general contracting and qualifying specialty construction work under Alabama law. Remodeling and Alteration and Building Maintenance Repair are recognized within Alabama's Building Construction classification structure.

1. Determine the appropriate classification. Identify the Alabama contractor classification that corresponds to the remodeling, alteration, maintenance, and repair work you intend to perform.
2. Select the appropriate application. Alabama maintains separate application processes for prime contractors and subcontractors.
3. Complete the required licensing application. Applicants must provide the information and supporting documentation required by the Alabama Licensing Board for General Contractors.
4. Document qualifying experience. Applicants requesting a classification must provide construction experience supporting the type of work for which they seek licensing.
5. Provide applicable project information and references. The Board reviews documented experience when determining classification eligibility.
6. Receive examination eligibility. Applicants must complete the state application process and receive authorization before proceeding with applicable PSI examinations.
7. Schedule the trade examination. Eligible candidates can register for the Remodeling, Alteration, and Maintenance Repair Contractor examination through PSI.
8. Complete the required contractor examinations. Applicants subject to Alabama's testing requirements must complete the applicable trade examination and other required testing associated with their licensing path.
9. Complete remaining licensing requirements. The Alabama Licensing Board for General Contractors determines final license approval after the applicable requirements are satisfied.

Passing an examination is one part of the overall licensing process. The Board also evaluates the applicant's experience, application information, requested classification, and other applicable licensing requirements.

State Requirements

The Alabama Licensing Board for General Contractors classifies contractors according to the types of construction work they are qualified to perform. Within the Building Construction classification structure, Alabama recognizes Building Maintenance Repair and Remodeling and Alteration as specific areas of work.

Applicants seeking a major classification must demonstrate qualifying experience across the applicable scope. Applicants whose experience is concentrated in a particular area may request specific subclassifications or specialty classifications supported by their documented work history.

Alabama's general contractor licensing law applies to covered construction, alteration, maintenance, repair, rehabilitation, remediation, reclamation, demolition, and related projects when the total cost of the undertaking, including labor and materials, is $100,000 or more. The current $100,000 threshold became effective October 1, 2024.

Subcontractors performing covered work at the applicable statutory threshold are also subject to Alabama general contractor licensing requirements. Prime contractor and subcontractor applicants follow separate application processes.

Contractors should make sure their requested classification corresponds with the actual work they intend to perform. Remodeling and alteration can involve modifications to existing buildings, while maintenance and repair may involve restoring, maintaining, or replacing existing construction components. The Board determines the classifications granted based on the applicant's documented qualifications.

Reference Books

• Code of Federal Regulations - 29 CFR Part 1926 (OSHA)
  This federal reference contains OSHA safety standards for construction. It supports preparation involving personal protective equipment, ladders, scaffolds, fall protection, electrical hazards, tools, excavation, material handling, and other jobsite safety requirements encountered during remodeling and repair work.
• Carpentry and Building Construction, 2016
  This broad construction reference supports study of building methods, framing, floors, walls, roofs, doors, windows, interior and exterior construction, tools, measurements, and other carpentry concepts relevant to remodeling and alteration projects.
• Finish Carpenter's Manual, Jim Tolpin, 1993
  This trade-focused reference covers professional finish carpentry techniques and supports preparation involving trim, fitting, layout, finish materials, installation methods, cabinetry, interior woodwork, and related remodeling tasks.
• International Building Code, 2015
  The 2015 International Building Code provides requirements applicable to commercial and other regulated building construction. It supports preparation involving building systems, materials, alterations, structural considerations, interior construction, occupancy-related provisions, and code compliance.
• Design and Control of Concrete Mixtures, 17th Edition
  This concrete reference provides information on concrete materials, mixture properties, proportioning, production, placement, curing, durability, and quality. It supports candidates preparing for concrete-related remodeling and repair topics.
• Modern Masonry - Brick, Block, Stone, Clois E. Kicklighter
  This masonry reference provides information on brick, concrete block, stone, mortar, tools, construction techniques, and masonry practices relevant to repair, alteration, and renovation work.
• The Complete Illustrated Guide to Furniture and Cabinet Construction, 2001
  This illustrated woodworking reference provides detailed coverage of furniture and cabinet construction, joinery, materials, components, fabrication, assembly, and woodworking techniques that can support cabinetry and finish-work preparation.

Book Preparation: All books are highlighted and tabbed for exam preparation.

Order Processing: Please allow up to 15 business days for tabbed and highlighted book package orders.

Exam Room Approved Books

The books in this package are prepared around the reference materials associated with the Alabama Remodeling, Alteration, and Maintenance Repair Contractor examination:

• Code of Federal Regulations - 29 CFR Part 1926 (OSHA)
  Used for applicable construction safety information.
• Carpentry and Building Construction, 2016
  Used for general carpentry and building construction topics.
• Finish Carpenter's Manual, Jim Tolpin, 1993
  Used for finish carpentry and detailed installation methods.
• International Building Code, 2015
  The code reference included for applicable building-code questions.
• Design and Control of Concrete Mixtures, 17th Edition
  Used for concrete materials and concrete construction preparation.
• Modern Masonry - Brick, Block, Stone
  Used for masonry materials, methods, and repair-related construction knowledge.
• The Complete Illustrated Guide to Furniture and Cabinet Construction, 2001
  Used for cabinetry, joinery, furniture construction, and related woodworking information.

The highlighted and tabbed preparation is designed to support candidates as they work with these references during study and approved open-book use. Candidates should spend time becoming familiar with the prepared books before testing instead of relying only on the tabs during the examination.

Test Information and Study Materials

A productive preparation plan should reflect the broad nature of remodeling and repair work. Begin by separating study into major categories such as rough carpentry, finish carpentry, code requirements, concrete, masonry, cabinetry, building components, and safety.

For rough carpentry, review framing terminology, floors, walls, roofs, openings, fastening methods, measurements, and basic structural relationships. Remodeling often requires contractors to understand existing framing before making alterations or repairs.

Finish carpentry preparation should include doors, trim, interior woodwork, cabinetry, fitting, alignment, layout, and installation techniques. Finish Carpenter's Manual and the furniture and cabinet construction reference provide useful material for these subjects.

For building-code preparation, learn the organization of the 2015 International Building Code. Practice using the index and identifying where major building subjects are located. Code navigation is more efficient when candidates recognize the chapter or topic before beginning a search.

Concrete and masonry should receive separate study time. Use Design and Control of Concrete Mixtures to review concrete materials and performance, while Modern Masonry can support preparation involving brick, block, stone, mortar, and masonry construction practices.

Safety preparation should involve regular use of OSHA rather than attempting to memorize the entire regulation. Learn how 29 CFR Part 1926 is organized and practice identifying the appropriate safety subject before searching for a requirement.

Use the highlighting and permanent tabs during practice sessions. Work through remodeling-related questions, identify the most appropriate book, locate the supporting information, and review the surrounding material. This method builds both technical understanding and reference familiarity.

How 1 Exam Prep Helps You Reach Your Goal

1 Exam Prep supports Alabama Remodeling, Alteration, and Maintenance Repair Contractor candidates through organized study guidance, construction-focused review, practice-oriented preparation, reference navigation, and a confidence-building study structure.

This examination requires knowledge across several construction trades, making organization especially important. Candidates can use the exam references to build a study routine around carpentry, code compliance, masonry, concrete, cabinetry, finish work, and safety rather than approaching the books as unrelated materials.

The highlighted and tabbed preparation helps make major subjects easier to locate. Candidates can use the prepared books while studying to develop a consistent navigation system and become comfortable moving between references.

Practice-oriented preparation can also help identify weaker areas. A contractor with strong framing experience may need more review of masonry or concrete, while an experienced remodeler may benefit from additional OSHA or building-code navigation practice.

Reference familiarity is especially important during a timed open-book test. Candidates should know whether to begin with OSHA, the IBC, a carpentry reference, or another trade book before searching for an answer.

The Alabama Remodeling, Alteration, and Maintenance Repair Contractor - Highlighted and Tabbed Book Package provides a focused set of prepared references to support study across the diverse construction subjects associated with remodeling, alteration, maintenance, and repair work.

How many questions are on the Alabama Remodeling, Alteration, and Maintenance Repair Contractor exam?

The examination contains 60 questions. Candidates have 120 minutes to complete the test.

Is the Alabama Remodeling, Alteration, and Maintenance Repair Contractor exam open book?

Yes. The examination is open book, allowing approved references to be used under PSI's examination rules.

Are the books in this package highlighted and tabbed?

Yes. All books in this package are highlighted and tabbed for exam preparation.

How long should I allow for a highlighted and tabbed package order?

Please allow up to 15 business days for tabbed and highlighted book package orders.

What books are included?

The package includes OSHA 29 CFR Part 1926, Carpentry and Building Construction, Finish Carpenter's Manual, the 2015 International Building Code, Design and Control of Concrete Mixtures, Modern Masonry, and The Complete Illustrated Guide to Furniture and Cabinet Construction.

Why are highlighted and tabbed books useful for this exam?

The examination covers several different construction subjects. Highlighting and permanent tabs can help candidates move more efficiently between important sections while studying and using approved references during an open-book exam.

Does the package include OSHA?

Yes. Code of Federal Regulations - 29 CFR Part 1926 is included for construction safety preparation.

Does the package include a building code?

Yes. The package includes the International Building Code, 2015.

Does the package cover carpentry and cabinetry?

Yes. Carpentry and Building Construction, Finish Carpenter's Manual, and The Complete Illustrated Guide to Furniture and Cabinet Construction provide material related to framing, finish carpentry, cabinetry, joinery, and woodworking.

Who administers the Alabama Remodeling, Alteration, and Maintenance Repair Contractor exam?

PSI administers the examination as part of the contractor licensing process overseen by the Alabama Licensing Board for General Contractors.

What is the Alabama general contractor licensing threshold?

Alabama's general contractor licensing law applies to covered construction, alteration, maintenance, repair, and related work when the total undertaking, including labor and materials, is $100,000 or more.