PSI Arizona C-11 (CR-11) Electrical (Commercial) Book Package
To be certified The Arizona Business Management exam must be taken as well.
SCOPE OF WORK
Installation, alteration, and repair of any wiring, related electrical material and equipment used in the generating, transmitting or utilization of electrical energy less than 600 volts, including all overhead electrical wiring on public rightof-ways for signs and street decorations, and all underground electrical distribution systems of less than 600 volts serving private properties. Installation, alteration, and repair on other than public right-of-ways of all outside, overhead, and underground electrical construction and all wiring in or on any building of less than 600 volts.
The exam is 110 questions taken over 240 minutes. The minimum required score to pass is a 70%.
The reference material listed above was used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed.
Candidates may use a silent, nonprinting, non-programmable calculator in the examination center.
The first 3 materials can be brought into the exam center, while the last 3 may not.
The following reference material is allowed in the examination center:
Code of Federal Regulations - 29 CFR Part 1926 (OSHA)
NFPA 70: National Electrical Code, 2017
NFPA 72: National Fire Alarm Code – 2016
The following reference material is not allowed in the examination center:
Ugly's Electrical References, George V. Hart, 2017
Photovoltaic Systems, 2nd edition, 2010
The Easy Guide to Solar Electric Part II Installation Manual, 2001
Candidates are responsible for bringing their own references to the examination center. Reference materials may be highlighted, underlined, annotated and/or indexed prior to the examination session. However, references may not be written in during the examination session. Any candidate caught writing, highlighting, underlining and/or indexing in the references during the examination will be reported to the Arizona Registrar of Contractors. Furthermore, candidates are not permitted to bring in any additional papers (loose or attached) with their approved references. References may be tabbed/indexed with permanent tabs only. (permanent tabs are defined as tabs that would tear the page if removed). Temporary tabs, (defined as Post-It notes, or other tabs that may be removed without tearing the page) are not allowed and must be removed from the reference before the exam will begin. If you are downloading from the Internet, you may bring this reference into the testing center with you as long as it is bound. You can have it spiral bound or you may hole-punch it and put it in a binder.|title=Mandatory Business Exam|psi-arizona-buisness-management-exam-certification-package|title=Reference Materials|osha-construction-standards-regulations-29-cfr-1926|nfpa-70-national-electrical-code-2008|nfpa-72-national-fire-alarm-code-2007-edition|uglys-electrical-references-2014|photovoltaic-systems|the-easy-guide-to-solar-electric-part-ii-installation-manual|title=Application Service|application-service|