South Carolina Roofing Contractor Exam Book Package - Highlighted and Tabbed

Prepare for the South Carolina Roofing Contractor examination with a complete collection of roofing, estimating, building-code, flashing, moisture-control, and construction-safety references. This package includes seven books prepared with highlighting and permanent tabs to support organized study and efficient navigation during the open-book Roofing examination administered by PSI.

The South Carolina Roofing Contractor Exam Book Package - Highlighted and Tabbed is designed for commercial roofing professionals pursuing the South Carolina Roofing contractor classification. The included references cover steep-slope roof systems, metal panel roofing, spray polyurethane foam systems, membrane roofing, built-up bituminous roofing, elastomeric systems, roof substrates, architectural metal flashing, condensation control, air-leakage control, estimating, code compliance, roof repairs, and OSHA safety.

Each reference addresses a different part of contractor-level roofing work. Roofing Construction and Estimating supports measurements, quantities, roof geometry, materials, labor considerations, and installation planning. The International Building Code provides commercial building requirements affecting roof assemblies, roof coverings, weather protection, reroofing, drainage, fire classifications, and related construction provisions.

The NRCA roofing manuals provide detailed technical information for specific roof-system categories. They support preparation involving steep-slope materials, membrane systems, metal panels, spray polyurethane foam roofing, flashing, roof transitions, moisture movement, condensation, air leakage, system maintenance, and repair practices. OSHA 29 CFR 1926 addresses the construction-safety requirements that apply to roofing work.

The books are highlighted to help important provisions, installation details, tables, diagrams, and safety requirements stand out during study. Permanent tabs provide quicker access to major chapters and frequently referenced topics. These features are most effective when candidates practice with the books regularly and become familiar with the tab placement before examination day.

This package includes the physical reference books listed on this page. An online course, live classes, application assistance, and licensing services are not included unless they are specifically identified in a separate product package.

Highlighting and tabs provide organization, but they do not replace roofing knowledge or exam preparation. Candidates should read the complete applicable section, review definitions and limitations, study the related diagrams, and understand how the information applies to field conditions.

The strongest preparation combines technical study with timed book navigation. Candidates should practice identifying the roofing system described in a question, choosing the appropriate reference, locating the relevant section, and confirming the answer without relying on electronic search tools.

Exam Details

The South Carolina Roofing Contractor examination contains 65 questions. Candidates must answer at least 46 questions correctly to pass. The examination allows three hours for completion.

South Carolina Roofing commercial contractor candidates are also required to pass the Business Management and Law for Contractors examination. The Business and Law examination is separate from the Roofing trade examination and uses its own reference material.

The Roofing examination content outline includes the following subject areas:

• Safety: 5 questions
• Roofing Substrate: 8 questions
• Steep-Slope Roofing: 22 questions
• Metal Panel Roofing: 6 questions
• Metal Flashing: 8 questions
• Roofing Repairs: 4 questions
• Elastomeric Roofing: 6 questions
• Built-Up Bituminous Roofing: 6 questions

Steep-slope roofing represents the largest portion of the examination. Candidates should dedicate significant study time to roof coverings, underlayments, decks, valleys, hips, ridges, eaves, rakes, penetrations, ventilation, flashing, fastening, drainage, material handling, and weather-protection principles.

Roofing-substrate preparation should include deck materials, fastening, surface condition, moisture, compatibility, preparation, attachment, and the relationship between the substrate and the selected roof system. Candidates should understand how poor substrate conditions can affect installation and long-term roof performance.

Metal panel preparation may include panel profiles, clips, fasteners, seams, laps, underlayments, thermal movement, penetrations, roof transitions, perimeter conditions, and flashing details. Candidates should understand how metal roof assemblies manage expansion, contraction, drainage, and wind exposure.

Metal-flashing preparation should address edge metal, base flashing, counterflashing, walls, curbs, penetrations, valleys, parapets, joints, sheet-metal fabrication, attachment, laps, sealants, and drainage. Flashing questions may require candidates to recognize how water should be directed away from vulnerable transitions.

Roof-repair preparation should include inspection, moisture entry, damaged materials, compatible repair methods, surface preparation, flashing corrections, replacement procedures, and the evaluation of existing roof conditions.

Elastomeric and membrane-roofing preparation should include substrates, insulation, attachment, seams, flashing, drainage, penetrations, terminations, coatings, repairs, and installation practices. Built-up bituminous roofing study should include felts, bitumen, surfacing, flashing, application methods, equipment, and system details.

Open Book Test

The South Carolina Roofing Contractor examination is an open-book test. Candidates may bring permitted references into the PSI testing center when the books comply with the current examination rules.

Open-book testing still requires substantial preparation. Candidates have three hours to answer 65 questions, so searching randomly through several large roofing manuals can consume valuable time. Successful preparation should combine roofing knowledge with repeated reference-navigation practice.

The highlighted and tabbed books in this package are prepared to support more efficient navigation. Permanent tabs help candidates reach major roofing subjects, while highlighting helps useful provisions, technical details, tables, and safety rules stand out on the page.

Use the International Building Code for code-compliance questions. Roofing Construction and Estimating supports measurements, quantities, construction methods, materials, and estimating. The NRCA manuals support questions involving particular roof systems, flashing conditions, moisture control, installation details, repairs, and recommended roofing practices. OSHA 29 CFR 1926 supports construction-safety questions.

A practical open-book process is to identify the roofing system or subject, select the most likely reference, use the tabs or index, locate the applicable section, read the surrounding material, review the related diagram or table, and confirm the answer.

Candidates should practice locating information involving roof slope, drainage, substrates, flashing, fastening, repairs, material compatibility, fall protection, reroofing, and code requirements. Mixed practice sessions help candidates learn how to move between several references as the examination changes subjects.

Testing rules may regulate highlighting, underlining, tabs, notes, loose sheets, inserted material, and book condition. Candidates should review the current PSI Candidate Information Bulletin before examination day.

Licensing Steps

Passing the South Carolina Roofing Contractor trade examination is one part of the commercial contractor licensing process. A passing score does not automatically issue a contractor license.

1. Confirm the Roofing classification. Determine that the classification matches the commercial roofing services the business intends to provide.
2. Review the licensing requirements. Identify the qualifying-party, experience, financial, business, and application requirements associated with the desired license.
3. Obtain the examination references. Use this highlighted and tabbed package to prepare with the listed roofing, estimating, code, and safety books.
4. Study the trade subjects. Review roof substrates, steep-slope systems, metal panels, flashing, repairs, elastomeric roofing, built-up roofing, and workplace safety.
5. Practice reference navigation. Learn the tabs, indexes, chapters, diagrams, tables, and terminology used throughout the books.
6. Pass the Roofing examination. Complete the technical trade examination and earn the required passing score.
7. Pass the Business Management and Law examination. Complete the separate examination required for South Carolina commercial contractor licensing.
8. Select the appropriate license group. South Carolina commercial contractor licenses are issued in groups connected to project-value limits and financial qualification.
9. Prepare the licensing application. Gather the qualifying-party information, experience documentation, business records, financial materials, and required supporting forms.
10. Submit the application. Apply through the South Carolina Contractor’s Licensing Board and complete the remaining requirements before performing regulated contracting work.

State Requirements

The South Carolina Contractor’s Licensing Board regulates commercial general and mechanical contractors. Roofing Contractor applicants must satisfy the examination, qualifying-party, experience, financial, business, and application requirements associated with the requested commercial contractor license.

All required examinations must be completed before applying for licensure with the Board. Commercial contractor candidates must pass the South Carolina Business Management and Law for Commercial Contractors examination before requesting qualifying-party certification.

South Carolina commercial contractor licenses are issued in monetary groups. The group shown on a license establishes the contractor’s project-value limit. Financial qualification requirements vary according to the requested group.

The licensed business must operate within the approved classification and license group. Contractors remain responsible for building permits, inspections, building-code requirements, OSHA compliance, local business requirements, insurance obligations, and project-specific approvals.

Roofing projects can involve structural decking, sheet metal, insulation, drainage, mechanical equipment, electrical systems, and other regulated work. Contractors must remain within the authorized scope of the Roofing classification and use properly licensed professionals when a project includes work outside that scope.

A state contractor license does not replace local permits, inspections, zoning approvals, or business licensing. Contractors should review the requirements that apply to each project before work begins.

Reference Books

• Roofing Construction and Estimating
  This practical roofing reference supports preparation involving roof measurements, material quantities, estimating, labor considerations, roof geometry, construction methods, installation practices, flashing, and common roofing materials.
• International Building Code, 2021
  The 2021 International Building Code provides commercial building requirements involving roof assemblies, roof coverings, weather protection, fire classifications, reroofing, drainage, materials, and related construction provisions.
• NRCA Roofing Manual: Steep Slope Roof Systems, 2025
  This manual addresses steep-slope roofing materials, substrates, underlayments, flashing, drainage, ventilation, installation details, penetrations, roof transitions, maintenance, and recommended roofing practices.
• NRCA Roofing Manual: Metal Panel and SPF Roof Systems, 2024
  This reference supports preparation involving metal panel and spray polyurethane foam roof systems, including substrates, fastening, seams, flashing, thermal movement, transitions, maintenance, repairs, and system design considerations.
• NRCA Roofing Manual: Membrane Roofing Systems, 2023
  This manual covers membrane roof systems, materials, attachment methods, substrates, insulation, seams, flashing, penetrations, drainage, terminations, maintenance, and repair practices.
• NRCA Architectural Metal Flashing, Condensation, and Air Leakage Control, 2026
  This publication supports study involving architectural metal flashing, roof transitions, perimeter details, penetrations, condensation management, air leakage, moisture movement, and building-envelope performance.
• OSHA 29 CFR 1926 Construction Industry Regulations
  This construction-safety reference addresses fall protection, personal protective equipment, ladders, scaffolds, material handling, hand and power tools, electrical hazards, housekeeping, and other requirements affecting roofing work.

Highlighted and Tabbed Book Preparation

Eligible books in this package are prepared with highlighting and permanent tabs. The preparation is designed to help candidates organize the reference set and reach major roofing subjects more efficiently during study and testing.

Highlighting may emphasize useful code provisions, roof-system information, flashing details, safety rules, tables, diagrams, installation guidance, and estimating material. Candidates should always read the highlighted material in context because a requirement may depend on an exception, limitation, note, table, or related section.

Permanent tabs identify major chapters and frequently referenced areas. Candidates should learn the tab arrangement during preparation rather than encountering it for the first time on exam day.

Timed practice provides the greatest value. Arrange the books within easy reach, work through mixed roofing questions, and track how long it takes to choose the correct reference and locate the supporting information.

Test Information and Study Materials

Build a study plan around the official examination content outline. Steep-slope roofing contains the largest number of questions, but substrates, flashing, metal panels, repairs, elastomeric roofing, built-up roofing, and safety should all receive focused preparation.

For steep-slope roofing, review shingles, tiles, underlayments, ventilation, valleys, hips, ridges, eaves, rakes, penetrations, fastening, flashing, and roof-deck preparation.

For membrane and elastomeric systems, review roof decks, insulation, attachment, seams, flashing, drainage, curbs, penetrations, perimeter securement, surfacing, coatings, and repair methods.

For metal panel roofing, study panel configurations, clips, fasteners, seams, laps, thermal movement, underlayments, flashing, penetrations, and transitions. Practice identifying details that allow movement while maintaining weather resistance.

For architectural metal flashing, review fabrication, joints, laps, fasteners, sealants, counterflashing, base flashing, edge metal, parapets, walls, penetrations, and drainage. Condensation and air-leakage preparation should include moisture movement, temperature differences, air barriers, vapor control, and continuity of the building enclosure.

For estimating, practice roof-area calculations, slope adjustments, waste allowances, material quantities, accessories, flashing, fasteners, underlayment, insulation, and repair allowances. Distinguish carefully between plan dimensions, actual roof dimensions, squares, linear measurements, and individual material units.

For safety, focus on fall protection, ladders, scaffolds, personal fall-arrest systems, guardrails, warning lines, personal protective equipment, material storage, housekeeping, tools, and electrical hazards.

How 1 Exam Prep Helps You Reach Your Goal

1 Exam Prep helps South Carolina Roofing Contractor candidates approach preparation with organized study guidance, trade-focused review, practical reference navigation, and a confidence-building study structure.

This highlighted and tabbed package brings the listed roofing, building-code, estimating, flashing, and OSHA references together in one coordinated collection. Candidates can focus on learning the material instead of locating and preparing each publication separately.

Trade-focused preparation connects roofing systems with practical contractor responsibilities. Candidates benefit from reviewing substrates, drainage, installation, flashing, moisture control, repairs, safety, materials, and estimating as related parts of a complete roofing project.

Reference-navigation practice helps candidates develop a repeatable process: identify the subject, choose the correct book, locate the applicable section, read the complete information, and confirm the answer.

Confidence develops through preparation and familiarity. Highlighting and tabs support organization, but examination performance depends on the candidate’s roofing knowledge, preparation, accuracy, and time management. No exam-preparation product can guarantee a passing score or licensing approval.

Is the South Carolina Roofing Contractor exam open book?

Yes. The South Carolina Roofing Contractor examination is open book, subject to the current PSI testing-center rules.

How many questions are on the Roofing examination?

The examination contains 65 questions.

What score is required to pass?

Candidates must answer at least 46 questions correctly.

How much time is allowed?

Candidates are allowed three hours to complete the examination.

How many books are included?

The package includes the seven roofing, code, estimating, flashing, moisture-control, and safety references listed on this page.

Are the books highlighted and tabbed?

Yes. Eligible references are highlighted and permanently tabbed to support organized study and open-book navigation.

Does this package include an online course?

No online course is stated as included with this highlighted and tabbed book package.

Do candidates also need to pass a Business and Law exam?

Yes. South Carolina Roofing commercial contractor candidates must also pass the Business Management and Law for Contractors examination.

Does the package include the Business and Law reference?

No. This package contains the listed Roofing trade-exam references. The separate Business and Law examination uses its own reference material.

Does passing the examinations automatically issue a license?

No. Applicants must also satisfy the qualifying-party, experience, financial, business, application, and licensing requirements established by the South Carolina Contractor’s Licensing Board.