Current PSI exam structure: the Remodeling, Alteration, and Maintenance trade exam contains 60 questions in 120 minutes and requires 70% to pass. Review the official PSI Alabama Candidate Bulletin before testing.
What Is an Alabama Remodeling, Alteration and Maintenance Contractor?
Alabama regulates general contracting through the Alabama Licensing Board for General Contractors. Remodeling, Alteration, and Maintenance is treated as a specialty classification under the major Building Construction classification and is intended for contractors whose documented experience matches that scope.
Short answer: this classification focuses on alteration, repair, remodeling and maintenance work within the license scope. Applicants must meet the Board's qualification requirements and pass the examinations required for the classification and licensing path.
Current Alabama law generally requires a general contractor license when covered work reaches $100,000 or more in labor and materials. The Board controls licensing scope, application requirements, classifications and bid limits; PSI administers the contractor examinations.
This guide combines the current PSI trade exam, Business and Law exam, approved references, licensing steps and a structured contractor exam prep system for open-book testing.
Alabama Remodeling Contractor Work Areas and Exam Responsibilities
Match your contractor classification and documented experience to the remodeling work you plan to perform.
| Work Area | What It Covers | Exam Prep Focus |
|---|---|---|
| Remodeling & Alteration | Modifications and improvements to existing building structures within the classification scope | Building code, sequencing and existing-condition awareness |
| Rough Carpentry | Framing, structural wood components and rough construction work | 16 PSI questions |
| Finish Carpentry | Trim, cabinetry, finish details and interior carpentry work | 16 PSI questions |
| Concrete & Masonry | Concrete materials, placement concepts, brick, block and stone work | 7 questions each |
| Windows, Doors & Siding | Building-envelope alteration and finish components | 3 questions per listed category |
| Maintenance & Repair | Covered repair and maintenance work within the issued classification | Safety, code and trade-method review |
Actual license scope depends on Alabama law, Board rules and the classification printed on the license. Confirm uncertain work directly with the Board before bidding or contracting.
What Does the Remodeling Classification Not Automatically Authorize?
Separate classifications, specialty-trade licenses, permits and professional credentials may still apply.
| Activity | Additional Authority | Important Note |
|---|---|---|
| Major Building Construction outside the specialty scope | Building Construction classification may be required | A specialty classification does not automatically become an unrestricted major classification |
| Electrical contracting | Applicable Alabama electrical license | General contractor classification does not replace electrical licensing |
| Plumbing or gas fitting | Applicable plumbing or gas-fitting credential | Use properly credentialed specialty contractors when required |
| HVAC contracting | Applicable HACR contractor license | Mechanical trade licensing is separate |
| Engineering or architectural services | Professional licensure may apply | A contractor license is not a professional design license |
| Local permits and inspections | Local building department requirements | State contractor licensure does not eliminate local permitting |
Use the Board's classification rules for legal scope. Contractor exam prep teaches tested material; actual authority comes from Alabama law and the license issued to the contractor.
Alabama Remodeling Contractor Exam Breakdown
The Alabama Remodeling, Alteration, and Maintenance Contractor trade exam and the Alabama Business and Law exam are administered through PSI. Open-book preparation should combine construction knowledge with fast reference navigation.
Trade Exam60 questions | 120 minutes | 70% to pass
Passing Score42 correct answers out of 60
Business and Law50 questions | 120 minutes | 70% to pass
FormatComputerized and open book
Testing ProviderPSI
Licensing AuthorityAlabama Licensing Board for General Contractors
Largest Trade TopicsRough Carpentry and Finish Carpentry | 16 questions each
Current License Threshold$100,000 or more for covered general contracting work under current law
Use the current official numbers. The PSI bulletin lists 60 trade questions in 120 minutes with a 70 percent passing score.
It is open book. Only approved references that comply with PSI rules may be used.
It is still time-sensitive. With an average of about two minutes per trade question, exam prep should train fast subject identification and book lookup.
Carpentry dominates the trade outline. Rough and Finish Carpentry together account for 32 of the 60 questions.
Carpentry, Code Navigation and Remodeling Reference Lookup
The trade exam rewards candidates who can move quickly between carpentry references, the 2015 International Building Code, OSHA, concrete and masonry resources under time pressure.
Simplified study illustration. Use the official PSI references for actual exam answers.
Train each practice question as a lookup sequence: identify the subject, select the correct book, locate the chapter or index term, confirm the rule or method, then return to the exam.
- Rough Carpentry: 16 questions.
- Finish Carpentry: 16 questions.
- Concrete: 7 questions.
- Masonry: 7 questions.
- Safety: 6 questions.
| Skill | What to Practice | Common Mistake |
|---|---|---|
| Rough carpentry | Framing, structural members, openings and construction methods | Underestimating the largest exam category |
| Finish carpentry | Trim, cabinetry, layout and finish details | Studying only general framing knowledge |
| IBC navigation | Definitions, chapters, tables, exceptions and index terms | Reading long code sections instead of targeted lookup |
| Concrete and masonry | Materials, mixtures, methods and field applications | Using field habit instead of the exam reference |
| OSHA safety | Hazard topics, PPE, ladders, scaffolds and construction safety | Trying to memorize OSHA instead of learning navigation |
| Time management | Two-minute pacing, skip-return strategy and timed sets | Spending too long on one difficult lookup |
Practice the lookup path, not only the answer. After every practice question, identify the reference and index term that got you there. That process builds open-book contractor exam speed.
Your Alabama Remodeling Contractor Licensing Roadmap
Seven steps take you from the correct classification to completed Alabama contractor licensing.
1
Confirm the classification
Review the Board's classification rules and make sure Remodeling, Alteration, and Maintenance matches your documented work experience.
2
Submit the current Board application
Use the current Alabama prime contractor application information and provide the classification, experience, references and financial documentation the Board requires.
3
Review the current PSI bulletin
Verify the trade exam, Business and Law requirement, exam format, content outline, reference books and testing rules.
4
Prepare with contractor exam prep
Study by official topic weight, prepare compliant permanent tabs and highlighting, and complete timed practice with the actual books.
5
Receive eligibility and schedule with PSI
After Board approval, register for the appropriate Alabama contractor examinations through PSI.
6
Pass the required examinations
Complete the Remodeling, Alteration, and Maintenance trade exam and the applicable Business and Law examination requirements.
7
Complete license issuance
Satisfy the Board's remaining requirements for the contractor license, classification and bid limit.
What Is on the Alabama Remodeling Contractor Exam?
Study according to the current 60-question PSI outline. The bars show question count relative to the largest category.
Rough Carpentry16 questions
Finish Carpentry16 questions
Concrete7 questions
Masonry7 questions
Safety6 questions
Windows and Doors3 questions
Siding3 questions
Drywall2 questions
| Business and Law Topic | Questions | Study Focus |
|---|---|---|
| Licensing | 8 | Board requirements, licensing rules and responsibilities |
| Payroll and Taxes | 6 | Payroll, tax obligations and records |
| Contracts | 6 | Contract terms, administration and obligations |
| Estimating and Bidding | 5 | Estimating, pricing structure and bid process |
| Financial | 5 | Financial management and business controls |
| Personnel and Labor | 5 | Employment and labor responsibilities |
| Risk Management | 4 | Insurance, risk and contractor exposure |
| Safety Recordkeeping and Environmental | 4 | Records, compliance and environmental responsibilities |
| Project Management | 3 | Planning, scheduling and project controls |
| Liens and Business Organization | 2 each | Lien fundamentals and company structures |
The official PSI content outline should control your study calendar. Allocate more time to high-weight topics, then reinforce weak areas with timed contractor exam prep drills.
Alabama Remodeling Contractor Exam Reference Books
Use the exact editions listed in the current PSI bulletin and your current exam authorization.
| Reference | Primary Use | Prep Priority |
|---|---|---|
| Code of Federal Regulations - 29 CFR Part 1926 (OSHA) | Construction safety and OSHA requirements | Core Safety reference |
| Carpentry and Building Construction, 2016 (Student Edition) | Framing, construction methods and carpentry fundamentals | High priority for Rough Carpentry |
| Finish Carpenter's Manual, Jim Tolpin, 1993 | Trim, layout and finish-carpentry methods | High priority for Finish Carpentry |
| International Building Code, 2015 | Building-code definitions and compliance rules | Core code reference |
| Design and Control of Concrete Mixtures, 17th Edition | Concrete materials, proportioning and methods | Concrete section |
| Modern Masonry - Brick, Block, Stone, 10th Edition | Masonry materials and construction methods | Masonry section |
| The Complete Illustrated Guide to Furniture and Cabinet Construction, 2001 | Cabinet assemblies, woodworking and finish-detail reference | Finish Carpentry depth |
| NASCLA Contractors Guide to Business, Law and Project Management, Alabama General, 3rd Edition | Alabama Business and Law exam | Core business reference |
Use the current bulletin. PSI reference lists and editions can change. Verify the bulletin tied to your current eligibility before test day.
How to Use Your Books During the Open-Book Exam
Winning open-book habits
- Use only the current authorized editions
- Add permanent tabs before exam day
- Highlight and underline controlling rules
- Practice index terms and chapter paths
- Use timed questions with the actual books
- Study according to the official PSI topic weights
Avoid these exam-prep mistakes
- Using temporary tabs such as Post-it notes
- Writing notes into references
- Adding loose or attached papers
- Reading entire chapters during timed practice
- Ignoring Business and Law until the end
- Studying an outdated exam breakdown
PSI reference rule: approved references may be highlighted, underlined and indexed, but must otherwise be unmarked. Permanent tabs are allowed; temporary tabs and additional papers are not.
The Alabama Business and Law Exam
The Alabama Licensing Board for General Contractors states that prime contractor applicants must take the Business and Law examination administered by PSI. The current PSI exam contains 50 questions, allows 120 minutes and requires 70 percent to pass.
Licensing is the largest individual category with eight questions. Payroll and Taxes and Contracts contain six questions each, while Estimating and Bidding, Financial, and Personnel and Labor contain five each.
The current listed business reference is the NASCLA Contractors Guide to Business, Law and Project Management, Alabama General, 3rd Edition.
Remodeling Specialty vs Building Construction Classification
The correct Alabama contractor path depends on the scope and documented experience you can support.
| Path | Classification Focus | Important Note |
|---|---|---|
| Remodeling, Alteration & Maintenance | Specialty work involving alteration, repair, remodeling and maintenance | Request the specialty when your qualifying experience matches this scope |
| Building Construction | Major building classification including building structures, modifications and additions | Broader experience requirements apply |
| Building Construction Under Four Stories | Building construction within the Board's height and scope limits | Scope differs from the remodeling specialty |
| Classification Amendment | Existing licensee requesting an additional or broader classification | Board review, projects, references and examination requirements apply |
Classification matters. The Board bases license classifications on documented experience and the type of contracts the applicant is qualified to perform.
Alabama Remodeling Contractor License Requirements
Prime Applicant
Licensing Path
- Select the correct Alabama contractor classification
- Document qualifying commercial or industrial project experience
- Provide required work references and application information
- Meet Board financial and licensing requirements
Exam Candidate
Exam Prep Focus
- 60-question Remodeling trade exam
- 50-question Business and Law exam
- Authorized open-book references
- Timed contractor exam prep practice
After Passing
Complete Licensing
- Satisfy remaining Board requirements
- Receive the approved classification and bid limit
- Maintain current license and renewal requirements
- Use the correct classification when bidding and contracting
90-Day Alabama Remodeling Contractor Study Plan
Use the official PSI outline to balance carpentry, concrete, masonry, safety, Business and Law, and timed reference navigation.
Weeks 1 and 2: Setup
- Verify the current PSI bulletin
- Confirm every reference edition
- Map topics to books
- Create a permanent-tab plan
Weeks 3 and 4: Rough Carpentry
- Framing and structural members
- Openings and construction methods
- Daily index drills
- Timed lookup sets
Weeks 5 and 6: Finish Carpentry
- Trim and finish methods
- Cabinet and furniture construction
- Windows and doors
- Siding and drywall
Weeks 7 and 8: Concrete, Masonry and Safety
- Concrete materials and mixtures
- Masonry methods
- OSHA navigation
- Code cross-checking
Weeks 9 and 10: Business and Law
- Licensing and contracts
- Payroll, taxes and financial
- Estimating and bidding
- Personnel, risk and project management
Weeks 11 and 12: Simulation
- Full timed practice sessions
- Weak-topic repair
- Reference inspection check
- Exam-day pacing plan
How Hard Is the Alabama Remodeling Contractor Exam?
The challenge is not just knowing construction. The PSI trade exam combines rough carpentry, finish carpentry, safety, windows and doors, siding, drywall, concrete and masonry under a 120-minute time limit.
Most avoidable problems come from slow book navigation, weak carpentry preparation, using outdated reference information, spending too long on individual lookups and neglecting the separate Business and Law exam. Structured contractor exam prep turns the official outline into a repeatable system.
Alabama Remodeling Contractor Exam Day Checklist
Bring and do this
- Arrive early for PSI check-in
- Bring current government-issued identification
- Bring only authorized reference books
- Use permanent tabs and prior highlighting
- Bring only an allowed calculator
- Budget about two minutes per trade question
Do not do this
- Use temporary tabs or Post-it notes
- Write notes in the approved references
- Insert loose or attached papers
- Bring unauthorized reference materials
- Spend too long on one difficult lookup
- Arrive after the testing session begins
After You Pass the Alabama Remodeling Contractor Exams
Passing the PSI examinations completes the testing portion of the licensing process, but it does not automatically issue the Alabama contractor license.
Complete the Alabama Licensing Board for General Contractors requirements for your application, classification and bid limit. The Board reviews experience, references, financial information and other required documentation before license issuance.
Use the final license classification exactly as issued when bidding or contracting, and keep the license current through the Board's renewal process.
Alabama Remodeling Contractor Exam Prep Options
Select preparation that supports the current PSI Remodeling trade exam and Alabama Business and Law exam. Combine structured study with the actual reference books and timed lookup practice.
Online Exam Prep
Structured Study
- Alabama contractor exam prep organization
- Trade-topic review
- Reference-navigation practice
- Timed exam preparation
Highlighted & Tabbed Books
Fast Navigation
- Current trade-reference set
- Permanent-tab organization
- Pre-highlighted study support
- Open-book exam focus
Business & Law Prep
Business Exam Focus
- Licensing and contracts
- Payroll, taxes and financial topics
- Estimating and bidding
- Risk and project-management review
Work Under the Correct Alabama Contractor Classification
Alabama regulates general contractors to protect public safety and establish licensing standards.
Ā· Use the classification that matches the work you are qualified to perform
Ā· Follow separate specialty-trade licensing requirements when they apply
Ā· Do not bid beyond the license classification or bid limit
Ā· Maintain current Board licensing and renewal requirements
Use the correct licensing path before bidding, contracting or performing regulated general contracting work.
Alabama Remodeling Contractor Exam Prep FAQ
License and Authority
The Alabama Licensing Board for General Contractors regulates this contractor classification. PSI administers the current Alabama general contractor examinations after the Board determines exam eligibility.
Remodeling, Alteration, and Maintenance is a specialty classification under the major Building Construction classification. Applicants should request the classification that matches their documented commercial or industrial work experience.
Yes. Alabama uses a Board approval process. Applicants submit the required license application and supporting documentation, then schedule the appropriate PSI examinations after eligibility is granted.
No. Passing the required exams satisfies the testing portion of the process. Applicants must still satisfy the Board's application, experience, financial, classification, and other licensing requirements.
Under current Alabama law, general contracting work covered by the statute generally requires licensure when the cost of the undertaking, including labor and materials, is $100,000 or more. Separate rules apply to swimming pool contracting.
Exam Format and Scoring
The current PSI bulletin lists 60 questions for the Remodeling, Alteration, and Maintenance Contractor trade exam.
The current PSI bulletin allows 120 minutes for the 60-question trade exam.
The minimum passing score is 70 percent, which equals 42 correct answers out of 60.
Yes. The current PSI program allows approved reference books in the examination room, subject to PSI reference-material rules.
Rough Carpentry and Finish Carpentry are the two largest categories with 16 questions each. Together they account for 32 of the 60 trade-exam questions.
The PSI outline covers Safety, Windows and Doors, Rough Carpentry, Finish Carpentry, Siding, Drywall, Concrete, and Masonry.
Yes. The Alabama Licensing Board for General Contractors states that prime contractor applicants must take the Business and Law examination administered by PSI.
The current PSI Business and Law exam contains 50 questions, allows 120 minutes, and requires a 70 percent passing score.
The current outline covers Licensing, Estimating and Bidding, Liens, Financial, Payroll and Taxes, Personnel and Labor, Project Management, Contracts, Business Organization, Risk Management, and Safety Recordkeeping and Environmental.
Books and Exam Prep
The current trade reference set used for exam prep includes OSHA 29 CFR Part 1926, Carpentry and Building Construction 2016, Finish Carpenter's Manual, the 2015 International Building Code, Design and Control of Concrete Mixtures 17th Edition, Modern Masonry 10th Edition, and The Complete Illustrated Guide to Furniture and Cabinet Construction.
Yes. PSI permits approved references to be highlighted, underlined, and indexed. Permanent tabs are allowed, while temporary tabs such as Post-it notes are not allowed.
No. PSI states that approved references must otherwise be unmarked and may not contain additional papers, whether loose or attached.
The current business reference is the NASCLA Contractors Guide to Business, Law and Project Management, Alabama General, 3rd Edition.
Use the official PSI topic weights to set study priorities, practice locating answers in the actual approved references, use compliant permanent tabs and highlighting, and complete timed contractor exam prep drills so you can locate and confirm information quickly.
Alabama Contractor Exam Prep and Open-Book Navigation
Explore Alabama Contractor Resources
Use official licensing sources and focused contractor exam prep for the full application and testing path.
Ready to Prepare for the Alabama Remodeling Contractor Exam?
Build the rough and finish carpentry knowledge, code-navigation speed, safety awareness, Business and Law familiarity and timed-testing skills needed for the current PSI contractor exams.
Questions? Call 877-775-9400
or email sales@1examprep.com
- Choosing a selection results in a full page refresh.
- Opens in a new window.