Prepare for the Georgia Electrical Contractor Class I (Restricted) exam with ACE, the Free Demo Personal AI Tutor from 1 Exam Prep. Explore residential electrical installations, single-phase power systems, grounding and bonding, electrical services, branch circuits, motor controls, electrical calculations, and National Electrical Code requirements through personalized AI-supported study guidance.
Georgia Class I Electrical Contractors perform qualifying electrical work on residential properties within the restrictions established by state law. Their responsibilities require knowledge of electrical safety, wiring methods, conductor sizing, circuit protection, equipment connections, and applicable construction codes.
The Georgia Electrical Contractor Class I (Restricted) Exam Prep Free Demo Personal AI Tutor introduces an organized approach to studying for the state licensing examination. ACE helps candidates explore technical concepts, review important terminology, and build consistent study habits.
Whether you are an experienced electrician, residential electrical installer, service technician, electrical foreman, or aspiring electrical contractor, ACE offers an introduction to focused, trade-specific preparation.
Develop familiarity with the National Electrical Code, strengthen your understanding of electrical calculations, and practice approaching questions involving real-world installation requirements.
Explore ACE: Meet Your Personal AI Exam Coach.
The Georgia Electrical Contractor Class I examination is administered by PSI Services for the Georgia Construction Industry Licensing Board, Division of Electrical Contractors.
The examination measures knowledge of electrical theory, installation practices, equipment, construction safety, electrical calculations, and contractor business responsibilities.
The examination includes 110 scored technical questions and 30 scored questions involving laws, regulations, and administrative functions. Candidates benefit from combining electrical knowledge with organized reference-book preparation.
The Georgia Electrical Contractor Class I examination is an open book test. Candidates may use the designated reference publications listed in the approved examination materials.
The examination reference list includes technical electrical publications, construction safety standards, electrical printreading materials, and contractor business references.
Candidates may bring as many or as few of the approved references as they choose. Additional publications are not permitted.
Reference books may be highlighted, underlined, or indexed with permanent tabs. Handwritten notes, unauthorized photocopies, and inserted papers are prohibited.
Silent, nonprogrammable calculators without alphabetic keys or printing capabilities are permitted.
The approved references include the 2023 National Electrical Code or the corresponding National Electrical Code Handbook.
Because the examination includes two four-hour testing periods, candidates should develop a study routine that emphasizes technical understanding, reference navigation, and efficient calculation methods.
Practice identifying the topic of each question, selecting the appropriate reference, and locating relevant information in tables, diagrams, and code provisions.
Obtaining a Georgia Class I Electrical Contractor license involves satisfying the application, qualification, and examination requirements established by the Georgia Construction Industry Licensing Board.
The Georgia Construction Industry Licensing Board, Division of Electrical Contractors regulates Georgia Class I and Class II electrical contractor licensing.
Under Georgia's electrical contracting law effective July 1, 2026, the Class I classification is restricted to qualifying electrical work on residential multifamily structures of no more than two levels or single-family dwellings of up to three levels.
These structures must have single-phase electrical installations not exceeding 400 amperes at the service drop or service lateral.
Georgia Class II is the unrestricted electrical contractor classification.
Class I applicants must meet the applicable licensing qualifications, including the required examination and an approved experience or education pathway.
One qualification pathway requires at least three years of full-time electrical field experience. This experience must demonstrate competence across the specified electrical installation categories and electrical calculations.
Other statutory pathways recognize qualifying electrical education combined with field experience or an approved apprenticeship program.
Applicants must be at least 21 years old. The licensing process also requires professional references and the applicable supporting documentation.
A Class I license does not provide unrestricted authority to perform electrical contracting on commercial, industrial, or other installations outside its defined scope.
The Georgia Class I Electrical Contractor examination uses seven designated reference publications covering technical electrical work, construction safety, business administration, and electrical calculations.
The following seven publications are approved for the Georgia Electrical Contractor Class I examination for examinations administered through December 31, 2026:
The examination contains 140 scored questions distributed across seven major subject areas.
Interior electrical systems, controls, circuits, and contractor regulations are major study priorities. Understanding their relationship to practical installations supports well-rounded examination preparation.
Single-phase electrical installations are central to Georgia's Class I licensing scope.
Study electrical supply arrangements, voltage relationships, connected loads, and service equipment.
Review how single-phase systems serve residential lighting, receptacles, appliances, motors, and other electrical equipment.
Electrical theory provides the foundation for technical examination questions.
Study voltage, current, resistance, power, and electrical circuit relationships.
Review Ohm's law, series and parallel circuits, electrical measurements, and basic troubleshooting principles.
Electrical services and branch circuits distribute electricity throughout residential buildings.
Study service conductors, panelboards, disconnecting means, overcurrent protection, and branch-circuit wiring.
Review conductor sizing, circuit ratings, equipment connections, and relevant National Electrical Code provisions.
Grounding and bonding are essential electrical safety concepts.
Study grounding electrode systems, equipment grounding conductors, bonding jumpers, and fault-current paths.
Practice identifying conductor requirements and locating the corresponding provisions within the National Electrical Code.
Electrical installation work requires suitable conductors, raceways, cables, fittings, and terminations.
Study conductor ampacity, insulation, wiring protection, raceway fill, and electrical box requirements.
Practice interpreting wiring scenarios involving residential branch circuits, services, and equipment connections.
Controls regulate the operation of electrical circuits and equipment.
Study switches, relays, contactors, motor starters, overload devices, and control circuits.
Review the function of timers, limit switches, and other devices used in electrical control systems.
Motor knowledge is an important part of electrical contracting.
Study single-phase motors, motor ratings, branch-circuit conductors, overload protection, and disconnecting means.
Review motor control diagrams and the electrical requirements applicable to motor installations.
Transformers change voltage levels and support different electrical equipment applications.
Study basic transformer operation, voltage relationships, single-phase transformer connections, and equipment protection.
Practice interpreting transformer ratings and simplified electrical diagrams.
Interior electrical installations are among the largest examination subjects.
Study lighting circuits, receptacles, electrical panels, cable systems, raceways, and equipment connections.
Review code requirements involving service grounding, conductor protection, and electrical distribution.
Specialized electrical installations may require additional code provisions.
Study electrical requirements involving swimming pools, mobile homes, electric signs, emergency lighting, and standby power systems.
Review how equipment type and installation location influence electrical safety requirements.
Electrical calculations and drawing interpretation are essential examination preparation skills.
Study circuit loads, conductor sizing, voltage drop, demand factors, and raceway calculations.
Practice interpreting electrical plans, panel schedules, diagrams, symbols, and construction specifications.
Electrical construction work requires awareness of workplace hazards and safe installation practices.
Study electrical hazard recognition, personal protective equipment, safe equipment operation, and construction safety requirements.
Review relevant OSHA construction standards and their application to electrical jobsite activities.
Licensed electrical contractors must understand business responsibilities as well as technical installation requirements.
Study contractor licensing, contracts, estimating, project management, employment taxes, and workplace compliance.
Review permitting, inspections, financial administration, and professional responsibilities associated with electrical contracting.
Effective preparation combines electrical theory, code navigation, calculation practice, and organized technical review.
Prioritize interior electrical systems, controls, basic circuits, and contractor administration while maintaining regular review of motors, transformers, and special installations.
Practice finding information in approved references and understanding how code requirements apply to practical electrical work.
1 Exam Prep supports electrical professionals preparing for contractor licensing examinations through organized study guidance, trade-focused technical review, and practice-oriented preparation.
With ACE, candidates can explore personalized AI-supported explanations covering electrical circuits, wiring methods, grounding and bonding, controls, motors, calculations, and National Electrical Code requirements.
The Georgia Electrical Contractor Class I (Restricted) Exam Prep Free Demo Personal AI Tutor introduces an interactive approach to reviewing subjects associated with Georgia's restricted electrical contractor examination.
ACE encourages candidates to revisit challenging concepts, strengthen reference-navigation skills, and develop consistent study habits.
For this open-book examination, familiarity with approved references helps support organized technical preparation.
Whether you are a residential electrician, service technician, foreman, or aspiring contractor, the ACE free demo introduces focused educational support from 1 Exam Prep.
Explore Georgia Class I Electrical Contractor preparation with ACE by 1 Exam Prep. Visit the ACE Personal AI Exam Coach page to explore the free demo.
It is a free demonstration of ACE, the personal AI exam coach from 1 Exam Prep, introducing study guidance for Georgia's Class I Restricted Electrical Contractor examination.
Yes. Candidates may consult the seven approved reference publications during testing.
The examination includes 140 scored questions and 15 unscored pretest questions, totaling 155 questions.
Candidates have eight hours, divided into two four-hour parts.
A minimum final scaled score of 70 is required.
PSI Services administers the examination for the Georgia Construction Industry Licensing Board, Division of Electrical Contractors.
Under the law effective July 1, 2026, Class I authorizes qualifying single-phase electrical work on specified residential structures, with installations not exceeding 400 amperes at the service drop or lateral.
Class I is restricted to its defined residential and single-phase electrical scope. Class II is the unrestricted electrical contractor classification.
The examination reference list effective through December 31, 2026, designates the 2023 National Electrical Code or the corresponding NEC Handbook.
One qualification pathway requires at least three years of full-time electrical field experience, including specified installation competencies and electrical calculations.
Yes. Georgia law recognizes qualifying electrical education combined with experience and an approved electrical apprenticeship pathway.
Yes. Regulations, laws, and administrative functions account for 30 scored questions.
No. Applicants must complete the applicable Georgia licensing requirements.
ACE introduces organized explanations and practice-oriented review covering electrical installations, circuits, controls, calculations, and contractor responsibilities.
No. The Georgia Construction Industry Licensing Board regulates electrical contractor licensing. ACE provides educational examination preparation support.
Visit the ACE Personal AI Exam Coach page to explore Georgia Class I Electrical Contractor examination preparation.
Take the next step toward Georgia Electrical Contractor Class I (Restricted) exam preparation. Explore the free ACE AI tutor demo and strengthen your understanding of residential electrical wiring, single-phase systems, grounding, electrical controls, code requirements, calculations, and contractor business responsibilities with 1 Exam Prep.