Nevada Commercial Remodeling Contractor (B-6) Highlighted & Tabbed Book Package

Prepare for the Nevada Commercial Remodeling Contractor (B-6) trade examination with a comprehensive Highlighted & Tabbed Book Package designed to make study and reference navigation more organized. This package combines the books permitted for use during the B-6 examination with the technical study references used to build knowledge in drywall, finishes, tile, concrete, masonry, flooring, safety, and other commercial remodeling subjects.

The Nevada B-6 Commercial Remodeling classification focuses on remodeling and improvement of qualifying interior commercial spaces while maintaining important limits on structural members, mechanical systems, fire protection systems, and other life-safety systems. Candidates should understand both the trade knowledge required for the examination and the scope of work authorized by the classification.

The exam-room-approved references in this package are the International Building Code, 2012, ACI 318-14: Building Code Requirements for Structural Concrete and Commentary, and ACI 530/530.1-13: Building Code Requirements and Specification for Masonry Structures and Companion Commentaries. These references are prepared with highlighting and tabs to help candidates organize important material and navigate the books more efficiently during study and on exam day.

The package also includes study-only references covering OSHA safety, gypsum construction, masonry, tile installation, flooring, and concrete construction. These books are intended to strengthen technical knowledge before the examination but are not allowed into the B-6 trade exam.

Highlighted and tabbed references can be especially useful for an open-book examination because candidates need to locate specific information under time pressure. A well-organized book does not replace studying, but it can support faster navigation when a question requires a code lookup. Candidates should practice with the prepared books before test day so the location and purpose of the tabs become familiar.

Please allow up to 15 business days for tabbed and highlighted book package orders.

Exam Details

The Nevada B-6 Commercial Remodeling Contractor trade examination is administered through PSI for candidates authorized to test through the Nevada State Contractors Board.

• Exam: Nevada B-6 Commercial Remodeling Contractor
• Testing Provider: PSI
• Number of Questions: 80
• Time Allowed: 3 hours
• Minimum Passing Score: 56 correct answers

The examination covers the following subject areas:

• Concrete: 4 questions
• Masonry: 4 questions
• Metals: 3 questions
• Carpentry: 7 questions
• Thermal and Moisture Protection: 10 questions
• Doors and Windows: 5 questions
• Drywall and Finishes: 17 questions
• Tile: 10 questions
• Safety: 10 questions
• Plan Reading and Estimating: 10 questions

Drywall and Finishes is the largest individual exam category with 17 questions. Candidates should review gypsum systems, wall and ceiling assemblies, finishing methods, materials, installation practices, and common interior remodeling applications.

Thermal and Moisture Protection, Tile, Safety, and Plan Reading and Estimating each contain 10 questions. Together, these categories make up a significant portion of the examination and should be major study priorities.

Carpentry accounts for seven questions and may involve framing relationships, interior construction, finish work, openings, and related remodeling concepts. Doors and Windows contributes five questions, while Concrete and Masonry each account for four.

Metals is the smallest section with three questions, but candidates should still prepare for it because every correct answer contributes toward the passing score.

Open Book Test

The Nevada B-6 Commercial Remodeling trade examination is an open-book test with specific approved references permitted in the exam room.

The exam-room-approved books included in this package are:

• International Building Code, 2012
• ACI 318-14: Building Code Requirements for Structural Concrete and Commentary
• ACI 530/530.1-13: Building Code Requirements and Specification for Masonry Structures and Companion Commentaries

These approved references are highlighted and tabbed to support faster navigation. Candidates should still study the books before test day and become familiar with the organization of each reference rather than relying entirely on the tabs.

The International Building Code, 2012 supports preparation involving occupancy, construction types, fire-resistance, means of egress, accessibility, interior finishes, materials, and other commercial building requirements relevant to remodeling work.

ACI 318-14 supports concrete-related questions involving materials, reinforcement, structural concrete provisions, construction requirements, and related technical topics.

ACI 530/530.1-13 supports masonry-related questions involving masonry materials, reinforcement, construction provisions, and specifications.

The following books in this package are not allowed into the B-6 examination:

• Code of Federal Regulations - 29 CFR Part 1926 (OSHA)
• Gypsum Construction Handbook, 7th edition
• Modern Masonry - Brick, Block, Stone, Clois E. Kicklighter, 10th edition
• ANSI A108/A118/A136.1:2017, American National Standard Specifications for the Installation of Ceramic Tile, 2017
• Builders Guide to Floors, 1997
• Setting Tile, 1995
• Handbook for Ceramic, Glass, and Stone Tile Installation, 2017
• The Contractor's Guide to Quality Concrete Construction - 4th Edition

These study-only references should be used before the exam to develop knowledge that candidates can apply without having those books available in the testing room.

Licensing Steps

The Nevada State Contractors Board regulates the B-6 Commercial Remodeling classification. Passing the trade examination is one step in the complete Nevada contractor licensing process.

1. Confirm the B-6 classification. Determine that Commercial Remodeling matches the work the business intends to perform.
2. Identify the qualifying individual. Designate the person who will satisfy the applicable experience and examination requirements.
3. Document qualifying experience. Prepare records showing relevant commercial remodeling work, responsibilities, project types, materials, trades, and supervision experience.
4. Prepare the Nevada contractor license application. Gather business information, qualifier information, experience documentation, financial information, and required supporting materials.
5. Submit the application. The Nevada State Contractors Board reviews the applicant's qualifications before examination eligibility is established.
6. Complete applicable background requirements. Follow required disclosure, fingerprint, and background procedures.
7. Meet financial responsibility requirements. Provide the applicable financial documentation required during the licensing process.
8. Receive examination eligibility. Candidates required to test can proceed with scheduling after authorization.
9. Schedule the B-6 examination through PSI. Arrange the Commercial Remodeling trade examination after eligibility has been established.
10. Prepare for the trade examination. Review drywall, finishes, tile, moisture protection, safety, plan reading, estimating, carpentry, concrete, masonry, metals, doors, and windows.
11. Complete applicable management qualification requirements. Nevada contractor licensing includes management qualification in addition to the trade examination.
12. Complete remaining licensing requirements. Satisfy applicable financial, bonding, background, and other Nevada State Contractors Board requirements before license issuance.

State Requirements

The Nevada B-6 Commercial Remodeling subclassification authorizes remodeling and improvement of qualifying interior spaces in structures that support, shelter, or enclose persons, animals, or other property.

The classification includes important limitations. A B-6 contractor is not authorized to install, remove, or modify structural members, mechanical systems, fire protection systems, or other life-safety systems solely under the authority of the B-6 classification.

These limitations are important in both exam preparation and licensed practice. Commercial remodeling can involve many interior building trades, but work that extends into restricted structural or life-safety systems requires the proper licensing and qualified trade involvement.

Typical B-6 knowledge areas include drywall, finishes, tile, doors, windows, carpentry, moisture protection, concrete, masonry, metals, estimating, and plan reading. Candidates should understand how these systems and materials come together in a commercial interior remodeling project.

For the standard Nevada contractor licensing pathway, the qualifying individual generally must document at least four years of qualifying experience within the applicable experience period required by the Nevada State Contractors Board.

Applicants should maintain organized records describing the work performed, responsibilities held, project types, scope of work, and the period during which qualifying experience was obtained.

Passing the B-6 trade examination alone does not automatically issue a Nevada contractor license. Applicants must also satisfy applicable experience, management qualification, financial responsibility, bonding, background, and other licensing requirements.

Reference Books

• International Building Code, 2012
  Exam-room-approved reference supporting commercial building-code preparation involving occupancy, means of egress, fire-resistance, accessibility, interior finishes, materials, construction types, and related remodeling requirements.
• ACI 318-14: Building Code Requirements for Structural Concrete and Commentary
  Exam-room-approved reference supporting concrete-related preparation involving materials, reinforcement, structural concrete, construction requirements, and related code provisions.
• ACI 530/530.1-13: Building Code Requirements and Specification for Masonry Structures and Companion Commentaries
  Exam-room-approved reference supporting masonry materials, reinforcement, structural masonry requirements, construction provisions, and specifications.
• Code of Federal Regulations - 29 CFR Part 1926 (OSHA)
  Study reference covering construction safety, personal protective equipment, ladders, scaffolds, fall protection, tools, and jobsite hazards. This reference is not allowed into the B-6 trade examination.
• Gypsum Construction Handbook, 7th edition
  Study reference supporting drywall systems, gypsum products, walls, ceilings, interior assemblies, installation practices, and finishing methods. This book is not allowed into the examination.
• Modern Masonry - Brick, Block, Stone, Clois E. Kicklighter, 10th edition
  Study reference supporting masonry materials, tools, brick, block, stone, construction methods, layout, and installation practices. This book is not allowed into the examination.
• ANSI A108/A118/A136.1:2017, American National Standard Specifications for the Installation of Ceramic Tile, 2017
  Study reference addressing ceramic tile installation standards, setting materials, installation methods, and industry specifications. This reference is not allowed into the examination.
• Builders Guide to Floors, 1997
  Study reference supporting floor systems, layout, construction, preparation, and related building concepts. This book is not allowed into the examination.
• Setting Tile, 1995
  Study reference supporting tile layout, preparation, installation, setting methods, and finishing practices. This book is not allowed into the examination.
• Handbook for Ceramic, Glass, and Stone Tile Installation, 2017
  Study reference supporting installation systems and practices for ceramic, glass, and stone tile. This reference is not allowed into the examination.
• The Contractor's Guide to Quality Concrete Construction - 4th Edition
  Study reference supporting concrete materials, placement, finishing, curing, field practices, and construction quality. This book is not allowed into the examination.

Exam Room Approved Books

• International Building Code, 2012
  Highlighted and tabbed exam-room-approved reference for the Nevada B-6 Commercial Remodeling examination.
• ACI 318-14: Building Code Requirements for Structural Concrete and Commentary
  Highlighted and tabbed concrete reference approved for use during the Nevada B-6 examination.
• ACI 530/530.1-13: Building Code Requirements and Specification for Masonry Structures and Companion Commentaries
  Highlighted and tabbed masonry reference approved for use during the Nevada B-6 examination.

The exam-room-approved books are prepared with highlighting and tabs to support reference navigation. Candidates should review the highlighted material and tab locations during their study period so the organization feels familiar before the examination.

Please allow up to 15 business days for tabbed and highlighted book package orders.

Test Information and Study Materials

A productive B-6 study plan should match the weighting of the examination. Drywall and Finishes deserves significant attention because it is the largest category, while Thermal and Moisture Protection, Tile, Safety, and Plan Reading and Estimating are also major sections.

Prioritize drywall and finishes. Study gypsum products, interior wall and ceiling systems, installation practices, finishing methods, materials, and typical commercial interior assemblies.

Review thermal and moisture protection. Understand insulation relationships, waterproofing, moisture control, sealants, and other protective systems used in commercial remodeling.

Study tile thoroughly. Review substrate preparation, setting materials, layout, installation methods, joint requirements, and practices involving ceramic, glass, and stone tile.

Prepare for safety questions. Use OSHA during study to reinforce fall protection, personal protective equipment, ladders, scaffolds, tools, material handling, and common construction hazards. Because OSHA is not allowed into the B-6 examination, candidates should develop enough familiarity to answer safety questions without relying on the book.

Practice plan reading and estimating. Candidates should be comfortable reading dimensions, interpreting plans, calculating quantities, identifying materials, and working with basic estimating information.

Review carpentry, doors, and windows. Study framing relationships, interior carpentry, openings, installation concepts, hardware, and finish work.

Use ACI 318-14 during preparation. Become familiar with the organization of the concrete reference so you can find relevant requirements efficiently.

Practice with ACI 530/530.1-13. Learn where key masonry topics are located and use the highlighted and tabbed sections as part of regular study.

Practice International Building Code navigation. Focus on occupancy, egress, accessibility, fire-resistance, interior finishes, and other topics relevant to commercial remodeling.

Use timed reference exercises. Candidates have three hours for 80 questions. Practice identifying the proper reference and locating information efficiently instead of searching through multiple books unnecessarily.

How 1 Exam Prep Helps You Reach Your Goal

1 Exam Prep supports Nevada B-6 Commercial Remodeling Contractor candidates through organized study guidance, trade-focused review, practice-oriented preparation, reference navigation, and confidence-building study structure.

The Highlighted & Tabbed Book Package is designed to make approved reference navigation more organized. Important material is highlighted and tabs are added to help candidates move through the International Building Code, ACI 318-14, and ACI 530/530.1-13 more efficiently.

Reference-navigation preparation helps candidates build a repeatable approach. A building-code question may direct the candidate toward the IBC, a concrete question may require ACI 318-14, and a masonry question may require ACI 530/530.1-13. Learning to select the right book first can save valuable exam time.

The study-only books provide additional technical depth in drywall, masonry, tile, concrete, flooring, and OSHA safety. These references help candidates build the knowledge needed for subjects that cannot always be solved through a direct code lookup.

Practice-oriented study helps identify weak areas before test day. A candidate with strong drywall experience may need more review of tile or plan reading, while someone with extensive remodeling experience may need additional practice using the approved code references.

Highlighted and tabbed books are most useful when candidates actively study with them. Becoming familiar with the tabs, highlighted sections, chapter organization, and indexes before exam day can make the references easier to use under testing conditions.

By combining prepared exam-room references, broader technical study books, organized review, and practical reference-navigation practice, 1 Exam Prep helps candidates build a focused preparation strategy for the Nevada B-6 Commercial Remodeling Contractor examination.

Frequently Asked Questions

What is included in the Nevada B-6 Highlighted & Tabbed Book Package?

The package includes the International Building Code, 2012; ACI 318-14; ACI 530/530.1-13; OSHA 29 CFR Part 1926; Gypsum Construction Handbook; Modern Masonry; the listed tile references; Builders Guide to Floors; Setting Tile; and The Contractor's Guide to Quality Concrete Construction.

Which books are allowed into the B-6 examination?

The International Building Code, 2012; ACI 318-14; and ACI 530/530.1-13 are the exam-room-approved references included in this package.

Are the exam-room books highlighted and tabbed?

Yes. The approved exam-room references in this package are prepared with highlighting and tabs to support study and faster reference navigation.

Which books are not allowed into the B-6 exam?

OSHA 29 CFR Part 1926, Gypsum Construction Handbook, Modern Masonry, the listed ceramic and stone tile references, Builders Guide to Floors, Setting Tile, and The Contractor's Guide to Quality Concrete Construction are study references and are not allowed into the B-6 trade examination.

Is the Nevada B-6 examination open book?

Yes. The B-6 examination permits the designated approved references listed for the trade exam.

How many questions are on the B-6 exam?

The Nevada B-6 examination contains 80 questions.

How much time is allowed for the examination?

Candidates have three hours to complete the B-6 examination.

What score is required to pass?

The minimum passing score is 56 correct answers out of 80 questions.

What is the largest B-6 exam category?

Drywall and Finishes is the largest individual category with 17 questions.

Why are highlighting and tabs useful?

Highlighting and tabs help organize important sections and can make it easier to move through approved references during study and the timed open-book examination.

Do highlighted and tabbed books replace studying?

No. Candidates should still understand the trade material and become familiar with the books before test day. Highlighting and tabs are navigation tools, not substitutes for technical preparation.

How long should I allow for a highlighted and tabbed book package order?

Please allow up to 15 business days for tabbed and highlighted book package orders.

Does passing the B-6 examination automatically issue a Nevada contractor license?

No. Passing the trade examination is one part of the licensing process. Applicants must also satisfy applicable experience, management qualification, financial responsibility, bonding, background, and other Nevada State Contractors Board requirements.

Who is this package best for?

This package is best for Nevada B-6 candidates who want the approved exam-room references professionally organized with highlighting and tabs while also receiving the broader study books used to prepare for commercial remodeling subjects.