Nevada General Engineering Contractor (A) Books Allowed into Exam Package

Prepare for the Nevada General Engineering Contractor (A) trade examination with a focused Books Allowed into Exam Package containing the references designated for exam-room use. This package is designed for candidates who specifically need the approved references used during the Nevada General Engineering examination rather than the larger collection of supplemental study-only books.

The package includes Nevada Division of Environmental Protection: Bureau of Water Pollution Control, Fact Sheets WTS-22 and WTS-23, ASME B31.8 - Gas Transmission and Distribution Systems, 2018, and NFPA 30, Flammable and Combustible Liquids Code, 2018.

The Nevada General Engineering Contractor examination covers a wide range of technical construction subjects associated with fixed works, infrastructure, utilities, piping, excavation, paving, concrete, steel, welding, and related engineering construction. Because the examination reaches across multiple construction disciplines, candidates need both broad trade knowledge and the ability to use approved references efficiently when a technical lookup is necessary.

This package focuses specifically on the references allowed into the examination room. It does not include the supplemental study-only books used to prepare for subjects such as OSHA safety, reinforcing steel, concrete construction, excavation, asphalt paving, pipe welding, ductile iron pipe installation, post-tensioning, electrical transmission work, or other areas covered by the General Engineering exam.

The three included references serve different purposes. ASME B31.8 supports questions involving gas transmission and distribution piping systems. NFPA 30 addresses flammable and combustible liquids. The Nevada Division of Environmental Protection WTS-22 and WTS-23 fact sheets provide Nevada-specific material relevant to water pollution control topics. Candidates should become familiar with the organization and terminology of each reference before test day.

What You Get

• Nevada Division of Environmental Protection: Bureau of Water Pollution Control, Fact Sheets WTS-22 and WTS-23 — included for approved exam-room use.
• ASME B31.8 - Gas Transmission and Distribution Systems, 2018 — included for approved exam-room use and gas transmission and distribution system reference.
• NFPA 30, Flammable and Combustible Liquids Code, 2018 — included for approved exam-room use and reference involving flammable and combustible liquid requirements.
• Focused Exam-Room Package: This package is built specifically around the listed references allowed into the Nevada General Engineering Contractor examination.

Candidates who already have their broader study materials but still need the applicable exam-room references can use this package to complete that part of their preparation. The books should be incorporated into regular practice rather than saved only for exam day.

Exam Details

The Nevada General Engineering Contractor (A) trade examination contains 100 questions. Candidates are allowed 3 hours to complete the examination, and the minimum passing score is 70 correct answers.

The examination covers the following subject areas:

• Sewers: 4 questions
• Water and Piping: 11 questions
• Gas and Liquid Fuel Piping: 12 questions
• Paving: 12 questions
• Excavation, Compaction and Grading: 12 questions
• Safety: 7 questions
• Steel: 6 questions
• Piles: 4 questions
• Concrete: 14 questions
• Traffic Control: 3 questions
• Welding: 6 questions
• Nevada One-Call: 3 questions
• Electrical Transmission Lines: 6 questions

The examination outline demonstrates why candidates need a broad preparation strategy. Concrete, gas and liquid fuel piping, paving, excavation, water and piping, welding, safety, steel, and electrical transmission work all contribute to the overall test.

The three references in this package cover only part of that examination content. Candidates should also prepare separately for the remaining technical subjects using appropriate study materials, trade knowledge, practice questions, calculations, and construction experience.

Open Book Test

The Nevada General Engineering Contractor (A) trade examination is an open-book test only with specific approved references. Trade examinations generally do not allow candidates to bring every study reference into the testing room, which makes it important to distinguish between books used for preparation and books authorized for test-day use.

The exam-room references included in this package are:

• Nevada Division of Environmental Protection: Bureau of Water Pollution Control, Fact Sheets WTS-22 and WTS-23
• ASME B31.8 - Gas Transmission and Distribution Systems, 2018
• NFPA 30, Flammable and Combustible Liquids Code, 2018

For gas-related questions, candidates should practice identifying terminology that points toward ASME B31.8. The reference addresses gas transmission and distribution piping systems and can be useful when a question requires confirmation of a technical requirement.

NFPA 30 should become familiar for questions involving flammable and combustible liquids. Candidates should understand how the code is organized and become comfortable moving through major sections when a specific requirement needs to be located.

The Nevada Division of Environmental Protection WTS-22 and WTS-23 fact sheets should also be reviewed before the exam so Nevada-specific terminology and requirements are familiar.

Open-book testing does not eliminate the need to study. Searching technical references can consume valuable time when the candidate does not know which book or section applies. A stronger approach is to understand the underlying subject first and use the approved reference only when a specific technical detail needs confirmation.

Licensing Steps

The Nevada General Engineering Contractor examination is one component of the contractor licensing process. Candidates must satisfy the applicable licensing requirements in addition to passing the trade examination.

1. Confirm the General Engineering classification. Determine that the fixed works, infrastructure, utility, civil, pipeline, or engineering construction activities the business intends to perform fall within the appropriate Nevada classification.
2. Identify the qualifying individual. The contractor license application must designate the individual responsible for providing the required trade qualification.
3. Prepare qualifying experience documentation. Organize applicable work history demonstrating experience related to the requested General Engineering classification.
4. Complete the Nevada contractor license application. Provide the required business, qualifying individual, experience, financial, and supporting information.
5. Submit the application for review. Nevada reviews the application and qualifying experience before examination eligibility is established.
6. Receive examination eligibility. Once approved to test, the qualifying individual can proceed with scheduling the required contractor examinations.
7. Prepare for the General Engineering trade examination. Study piping, concrete, paving, excavation, grading, welding, steel, safety, utility construction, and the other applicable subjects.
8. Practice with approved references. Use WTS-22 and WTS-23, ASME B31.8, and NFPA 30 during study so their organization becomes familiar before the examination.
9. Complete the applicable examinations. Satisfy the examination requirements associated with the license application unless an authorized waiver applies.
10. Complete remaining licensing requirements. Finish the other applicable steps required before a Nevada contractor license is issued.

State Requirements

Nevada classifies a Class A license as General Engineering contracting. The principal business associated with the classification involves fixed works requiring specialized engineering knowledge and skill.

General Engineering contracting can include work associated with major infrastructure, utilities, transportation, pipelines, excavation, grading, paving, water systems, sewer systems, industrial projects, foundations, and other fixed works that require engineering construction knowledge.

The broad scope of General Engineering work is reflected in the examination. Candidates should be prepared to apply technical knowledge across several disciplines rather than concentrating on a single trade.

The Nevada contractor licensing process also requires more than an examination score. Applicants must complete the applicable application and qualification requirements, and the qualifying individual must demonstrate the experience appropriate to the requested contractor classification.

Candidates should treat exam preparation and licensing preparation as related but separate responsibilities. The books in this package support the trade examination, while the contractor licensing application involves additional requirements outside of the examination itself.

Reference Books

• Nevada Division of Environmental Protection: Bureau of Water Pollution Control, Fact Sheets WTS-22 and WTS-23
  These Nevada-specific fact sheets provide material associated with water pollution control topics relevant to General Engineering exam preparation. Candidates should review the terminology, requirements, and organization before test day so the material can be used efficiently during the examination.
• ASME B31.8 - Gas Transmission and Distribution Systems, 2018
  This technical code addresses gas transmission and distribution piping systems. It covers subjects associated with materials, design, construction, welding, testing, inspection, operation, and safety. Candidates should become familiar with its organization for questions involving gas transmission and distribution work.
• NFPA 30, Flammable and Combustible Liquids Code, 2018
  This code addresses requirements associated with the storage, handling, and use of flammable and combustible liquids. It supports General Engineering preparation for liquid fuel and related technical questions where a specific code requirement may need to be located.

Exam Room Approved Books

• Nevada Division of Environmental Protection: Bureau of Water Pollution Control, Fact Sheets WTS-22 and WTS-23
  Included as Nevada-specific reference material allowed for use during the General Engineering examination.
• ASME B31.8 - Gas Transmission and Distribution Systems, 2018
  Included as the approved technical reference for applicable gas transmission and distribution system questions.
• NFPA 30, Flammable and Combustible Liquids Code, 2018
  Included as the approved technical reference for applicable flammable and combustible liquid questions.

This package contains only the listed references intended for exam-room use. Supplemental trade references used to study concrete, reinforcing steel, OSHA safety, ductile iron pipe, excavation, pipe welding, paving, pipefitting, Nevada One Call, steel joists, post-tensioning, concrete pipe installation, and electrical transmission are not included in this Books Allowed into Exam Package.

Test Information and Study Materials

A strong Nevada General Engineering study plan should separate subjects that can be researched from approved references during the exam from subjects that must be learned through advance preparation.

Gas and Liquid Fuel Piping deserves significant attention because it represents an important portion of the examination. Candidates should understand basic system concepts and practice navigating ASME B31.8 and NFPA 30 for technical requirements.

Water and Piping preparation should include water systems, pipe installation, underground utility construction, sewer concepts, and related civil construction knowledge. The Nevada water pollution control fact sheets should be reviewed alongside broader piping study materials.

Concrete is another major examination subject. Study should include concrete materials, placement, reinforcement, curing, consolidation, field practices, quantities, and construction quality. These topics require preparation beyond the three references included with this package.

Paving preparation should include asphalt paving operations, surface preparation, placement, compaction, materials, and field construction methods.

Excavation, Compaction and Grading should include trenching, soil handling, equipment, backfill, compaction, slopes, grading operations, and underground utility protection.

Safety should be reviewed as an independent study area. General Engineering projects frequently involve heavy equipment, excavation, traffic exposure, lifting, welding, piping, and other hazards that require strong construction-safety knowledge.

Steel and Welding preparation should include structural components, steel handling, welding terminology, joint preparation, procedures, and common field practices.

Electrical Transmission Lines should also be included in the study plan. Candidates should understand general transmission and utility construction concepts associated with the examination outline.

Nevada One-Call preparation should include utility-location and excavation-notification concepts. Underground utility protection is particularly relevant to General Engineering work involving excavation and pipeline construction.

For the three exam-room references, practice should be timed. Start with a technical question, identify which reference applies, locate the relevant section, and confirm the answer. Repeating these exercises can help reduce unnecessary searching during the examination.

Candidates should not expect every General Engineering question to be answered directly from one of the three books. The exam includes numerous construction subjects that require trade knowledge developed before test day.

A balanced preparation schedule might alternate between code-reference navigation and closed-reference trade review. One study session could focus on ASME B31.8 navigation, while another focuses on concrete or excavation concepts without relying on a book. This helps build both lookup skills and technical recall.

How 1 Exam Prep Helps You Reach Your Goal

1 Exam Prep supports Nevada General Engineering Contractor candidates through organized study guidance, trade-focused review, practice-oriented preparation, approved-reference navigation, and a structured approach to the broad technical knowledge associated with the Class A examination.

This Books Allowed into Exam Package gives candidates the specific references needed for exam-room preparation without adding the larger group of study-only books found in a full Nevada General Engineering Exam Book Package.

Reference-navigation practice can help candidates become more comfortable with ASME B31.8, NFPA 30, and the Nevada Division of Environmental Protection fact sheets before test day. Instead of opening the books for the first time during the examination, candidates can build familiarity with their structure throughout preparation.

1 Exam Prep also encourages candidates to recognize the difference between reference-based questions and knowledge-based questions. General Engineering candidates need to understand concrete, excavation, paving, welding, steel, piping, safety, utilities, and other subjects even when a reference is not available.

Practice-oriented preparation helps identify weak areas so study time can be directed where it has the greatest value. If gas piping questions are difficult, candidates can spend additional time with ASME B31.8. If flammable liquid questions create problems, NFPA 30 navigation can receive more attention.

The goal is to help candidates build an organized approach to a broad examination: understand the trade, know which references can be used, practice finding technical requirements efficiently, and strengthen the subjects that must be answered from construction knowledge.

What books are included in the Nevada General Engineering Books Allowed into Exam Package?

The package includes Nevada Division of Environmental Protection: Bureau of Water Pollution Control Fact Sheets WTS-22 and WTS-23, ASME B31.8 - Gas Transmission and Distribution Systems, 2018, and NFPA 30, Flammable and Combustible Liquids Code, 2018.

Are these books allowed inside the Nevada General Engineering examination?

Yes. These are the exam-room references included with this Nevada General Engineering Contractor Books Allowed into Exam Package.

Is the Nevada General Engineering Contractor exam open book?

The trade examination permits specific approved references. Candidates cannot assume that every book used for study can be taken into the examination room.

How many questions are on the Nevada General Engineering exam?

The Nevada General Engineering Contractor trade examination contains 100 questions.

How much time is allowed for the exam?

Candidates are allowed 3 hours to complete the examination.

What score is required to pass?

The minimum passing score is 70 correct answers.

Why is ASME B31.8 included?

ASME B31.8 supports preparation and exam-room reference use for technical requirements associated with gas transmission and distribution piping systems.

Why is NFPA 30 included?

NFPA 30 supports preparation and exam-room reference use for requirements involving flammable and combustible liquids.

Why are WTS-22 and WTS-23 included?

These Nevada Division of Environmental Protection fact sheets provide Nevada-specific reference material associated with water pollution control topics relevant to General Engineering preparation.

Does this package include the study-only General Engineering books?

No. This package is specifically focused on the references allowed into the exam. Supplemental books covering concrete, OSHA safety, reinforcing steel, excavation, paving, welding, pipe installation, Nevada One Call, and other study areas are not included.

Should I practice with the approved books before test day?

Yes. Repeated navigation practice helps candidates become familiar with the structure, terminology, and layout of the approved references before using them under exam conditions.

Does this package guarantee a passing score?

No. The package provides approved reference materials to support organized examination preparation. Exam results depend on each candidate's experience, trade knowledge, study, and performance.