Nevada Pipeline And Conduits Contractor (A-19) Exam Book Package

Prepare for the Nevada Pipeline And Conduits Contractor (A-19) examination with a comprehensive reference package covering gas piping, water piping, welding, excavation, paving, underground utility awareness, construction safety, and pipeline installation practices. This package combines the NFPA 30, Flammable and Combustible Liquids Code, 2018 with a broad group of technical study references designed to support the major subjects tested on the Nevada A-19 trade examination.

The Nevada A-19 examination is an open-book test, but only the NFPA 30, Flammable and Combustible Liquids Code, 2018 from this package is allowed into the examination room. The remaining books are study references and are not allowed in the exam. Candidates should therefore use those materials before test day to build the trade knowledge needed for gas piping, water piping, excavation, grading, welding, paving, safety, and Nevada One Call questions.

The A-19 examination contains 60 questions, allows 2 hours for completion, and requires 42 correct answers to pass. Gas Piping and Water Piping are the two largest sections with 15 questions each. Candidates should also prepare for Welding, Safety, Paving, Excavation, Compaction and Grading, and Nevada One Call.

Nevada's A-19 Pipeline and Conduits classification covers the fabrication and installation of electrical conduits and pipelines, including work necessary to complete those installations such as trenching, boring, shoring, backfilling, compacting, paving, surfacing, and application of protective coatings. The classification also encompasses the work authorized under the A-19A Water, A-19B Gas, and A-19C Electrical Conduits for Underground Transmission subclassifications.

This wide scope makes preparation especially important. An A-19 candidate is not studying only pipe installation. The exam reaches into excavation, pipeline materials, gas systems, water systems, welding, pavement restoration, utility marking, and safety. The references in this package allow candidates to approach those subjects as parts of a complete underground pipeline and conduit project.

What You Get

• NFPA 30, Flammable and Combustible Liquids Code, 2018 — the exam-room-approved code reference included in this package.
• Code of Federal Regulations - 29 CFR Part 1926 (OSHA) — study reference for construction safety, excavation hazards, equipment, protective systems, and jobsite practices.
• ASME Code for Pressure Piping - B31.8 - Gas Transmission and Distribution Piping Systems, 2014 — study reference supporting gas pipeline construction and system requirements.
• Pipefitter's Handbook — practical study material for piping, fittings, layout, measurements, and related pipefitting knowledge.
• Installation Guide for Ductile Iron Pipe — preparation for ductile iron pipe handling, joining, installation, and water-pipeline applications.
• Pipe and Excavation Contracting — study material for trenching, excavation, grading, compaction, backfilling, and pipeline construction.
• Suggested Marking Guidelines and The Nevada One Call Law — preparation for underground utility notification and marking requirements.
• Concrete Pipe and Box Culvert Installation, 2019 — study material for concrete pipe, culvert installation, bedding, placement, and backfill concepts.
• Hot Mix Asphalt Paving Handbook — preparation for asphalt placement, pavement restoration, compaction, and paving operations.
• Pipe Welding Procedures, 2003 — study material supporting welding methods, preparation, procedures, and pipeline-related welding knowledge.

Exam Details

The Nevada A-19 Pipeline and Conduits examination contains 60 questions. Candidates are allowed 2 hours to complete the examination and must answer 42 questions correctly to pass.

The examination content is divided into the following areas:

• Gas Piping: 15 questions
• Water Piping: 15 questions
• Welding: 6 questions
• Safety: 8 questions
• Paving: 5 questions
• Excavation, Compaction and Grading: 8 questions
• Nevada One Call: 3 questions

Gas Piping and Water Piping together make up half of the examination. Candidates should understand pipeline materials, fittings, installation procedures, joining methods, protection, testing concepts, trench conditions, and the differences between systems intended for water and gas service.

Safety and Excavation, Compaction and Grading each account for 8 questions. Underground construction introduces hazards involving trenches, heavy equipment, buried utilities, moving vehicles, material handling, and changing soil conditions. Candidates should treat these subjects as core A-19 knowledge.

Welding accounts for 6 questions. Preparation should include pipe preparation, welding procedures, joints, equipment, workmanship, and concepts related to producing suitable welded connections.

Paving accounts for 5 questions because pipeline projects frequently require restoration of streets, driveways, or other paved surfaces after trenching and underground work are completed.

Open Book Test

The Nevada A-19 Pipeline and Conduits examination is an open-book test.

The NFPA 30, Flammable and Combustible Liquids Code, 2018 is the reference from this package allowed into the examination room.

The other references in this package are not allowed into the examination. Candidates should use OSHA, ASME B31.8, Pipefitter's Handbook, the ductile iron installation guide, Pipe and Excavation Contracting, Nevada One Call material, concrete pipe installation material, the Hot Mix Asphalt Paving Handbook, and Pipe Welding Procedures as preparation resources before test day.

Because only one of the included references is available during the exam, candidates should not approach the test as though every trade question can be answered through book lookup. Gas piping, water piping, welding, excavation, paving, safety, and utility-marking knowledge must be developed during preparation.

The allowed NFPA 30 reference may be highlighted, underlined, and indexed before the examination. Permanent tabs may be used for indexing. Written notes and additional loose or attached papers are not permitted in the approved reference, and temporary tabs are not allowed.

With 60 questions in two hours, candidates have an average of approximately two minutes per question. Efficient preparation should therefore combine trade knowledge with familiarity with the approved code reference.

Licensing Steps

The Nevada A-19 trade examination is one part of the contractor licensing process. Applicants must complete the applicable qualification, application, examination, and licensing requirements before a contractor license is issued.

1. Confirm the A-19 classification. Make sure Pipeline and Conduits matches the work the business intends to perform.
2. Identify the qualifying individual. The contractor application must designate the person responsible for satisfying the applicable trade qualification requirements.
3. Document qualifying experience. Prepare the work-history information required for the requested classification.
4. Submit the Nevada contractor license application. Complete the applicable application and supporting documentation.
5. Receive examination eligibility. After the application and experience information are reviewed, the qualifying individual can proceed with the required examinations.
6. Prepare for the A-19 examination. Study gas piping, water piping, welding, excavation, grading, compaction, safety, paving, and Nevada One Call.
7. Prepare for Nevada Business and Law. The qualifying individual must also satisfy the applicable Nevada Business and Law examination requirement unless an authorized waiver applies.
8. Complete the required examinations. Take the applicable A-19 trade examination and Business and Law examination.
9. Complete the remaining licensing requirements. Finish the additional state requirements associated with issuance of the contractor license.

State Requirements

Nevada classifies A-19 Pipeline and Conduits under General Engineering contracting.

The scope includes the fabrication and installation of electrical conduits only and pipelines, together with trenching, boring, shoring, backfilling, compacting, paving, surfacing, and application of protective coatings necessary to complete the installation of pipes and conduits.

A holder of the A-19 classification may also perform work authorized under the related A-19A Water, A-19B Gas, and A-19C Electrical Conduits for Underground Transmission subclassifications.

This broad scope explains why the examination combines pipeline trade knowledge with earthwork and surface-restoration subjects. A pipeline installation requires more than assembling pipe. Contractors must understand how to excavate safely, prepare trenches, install and join piping, protect the system, backfill and compact properly, and restore disturbed surfaces.

Underground utility awareness is also essential. Nevada One Call requirements and marking practices help contractors identify existing underground facilities before excavation begins and reduce the risk of damaging utilities during trenching or boring operations.

Reference Books

• NFPA 30, Flammable and Combustible Liquids Code, 2018
  This code reference supports preparation involving flammable and combustible liquids, storage and handling considerations, piping-related provisions, and associated safety requirements. It is the exam-room-approved reference included in this package.
• Code of Federal Regulations - 29 CFR Part 1926 (OSHA)
  This construction safety reference supports preparation involving excavations, trenches, protective systems, personal protective equipment, tools, heavy equipment, material handling, and other jobsite hazards common to pipeline construction. It is not allowed into the examination.
• ASME Code for Pressure Piping - B31.8 - Gas Transmission and Distribution Piping Systems, 2014
  This study reference supports preparation involving gas transmission and distribution piping systems, materials, construction, joining, installation, testing concepts, and related pipeline requirements. It is not allowed into the examination.
• Pipefitter's Handbook
  This practical reference supports study involving piping systems, fittings, measurements, layout, pipe joining concepts, and field-oriented pipefitting knowledge useful for A-19 preparation. It is not allowed into the examination.
• Installation Guide for Ductile Iron Pipe
  This study reference supports water-pipeline preparation involving ductile iron pipe handling, trench conditions, joining, installation, fittings, and related construction practices. It is not allowed into the examination.
• Pipe and Excavation Contracting
  This reference supports preparation involving excavation, trenching, shoring, grading, bedding, backfilling, compaction, equipment, and general pipeline construction procedures. It is not allowed into the examination.
• Suggested Marking Guidelines and The Nevada One Call Law
  This material supports preparation involving underground utility notification, marking practices, excavation awareness, and responsibilities associated with avoiding damage to existing underground facilities. It is not allowed into the examination.
• Concrete Pipe and Box Culvert Installation, 2019
  This study reference supports preparation involving concrete pipe and culvert installation, foundation conditions, bedding, placement, joining, backfill, and installation practices. It is not allowed into the examination.
• Hot Mix Asphalt Paving Handbook
  This reference supports preparation involving pavement restoration, asphalt placement, compaction, joints, equipment, and paving procedures relevant when pipeline construction disturbs existing paved surfaces. It is not allowed into the examination.
• Pipe Welding Procedures, 2003
  This study reference supports preparation involving pipe welding methods, joint preparation, welding procedures, equipment, techniques, and workmanship. It is not allowed into the examination.

Exam Room Approved Books

• NFPA 30, Flammable and Combustible Liquids Code, 2018
  This is the exam-room-approved reference included with the Nevada A-19 Pipeline and Conduits Contractor Exam Book Package. Candidates should become familiar with its organization before test day so applicable provisions can be located efficiently during the timed examination.

The remaining books in this package are study references and are not allowed into the A-19 examination room.

Test Information and Study Materials

A strong Nevada A-19 study plan should begin with the two largest examination areas: Gas Piping and Water Piping.

For Gas Piping, candidates should study pipeline materials, fittings, joining methods, installation procedures, trench conditions, protective coatings, valves, pressure-related concepts, and the construction practices associated with gas transmission and distribution systems.

The ASME B31.8 reference can support deeper preparation for gas-pipeline subjects. Because it is not available during the examination, candidates should use repeated review and practice questions to turn that material into working knowledge.

For Water Piping, candidates should understand common pipeline materials, ductile iron installation, fittings, bedding, joining, trench preparation, support, backfill, compaction, and installation considerations.

The Installation Guide for Ductile Iron Pipe and concrete-pipe material can help candidates compare installation practices across different types of pipeline construction.

Excavation, Compaction and Grading is another major area. Candidates should understand excavation methods, trench preparation, shoring concepts, soil conditions, bedding, backfill, lift placement, compaction, and restoration of grade.

Pipeline performance depends heavily on the conditions surrounding the installed pipe. Improper bedding, poor backfill, or insufficient compaction can contribute to movement, settlement, or damage. Candidates should understand the relationship between earthwork and successful pipeline installation.

Safety should be studied alongside excavation rather than separately. Underground construction can expose workers to cave-ins, heavy equipment, traffic, suspended loads, tools, hazardous atmospheres, and existing utilities.

OSHA study should include trench and excavation safety, protective systems, access, personal protective equipment, equipment operation, and general construction hazard recognition.

Welding should include joint preparation, pipe alignment, welding techniques, equipment, procedures, and the importance of producing suitable connections. The Pipe Welding Procedures reference provides focused material for this portion of the exam.

Paving should be studied as part of project restoration. Pipeline work often requires cutting or disturbing pavement, and the completed project may require proper preparation, asphalt placement, joint construction, compaction, and surface restoration.

The Hot Mix Asphalt Paving Handbook can help candidates understand the sequence of paving operations and how material placement and compaction affect pavement quality.

Nevada One Call accounts for 3 questions. Candidates should understand underground utility notification and marking practices before excavation begins. This is a small exam category, but it represents an important part of safe pipeline construction.

A useful preparation method is to study the project in field sequence. Begin with utility notification and site planning, continue through excavation and trench protection, then review bedding, pipe installation, joining or welding, protective coatings, backfilling, compaction, and surface restoration.

This sequence helps connect individual examination categories to the actual progression of pipeline work.

Because most references are not allowed into the exam, candidates should use active recall. After reading a section, close the book and explain the procedure without referring back to the text. Then review anything that was missed.

Practice questions should be used to identify weak areas. If gas-piping questions are difficult, devote more time to ASME B31.8 and pipefitting material. If excavation questions are weak, return to Pipe and Excavation Contracting and OSHA. If paving questions are missed, focus on asphalt placement and restoration concepts.

For the approved NFPA 30 reference, candidates should practice navigation under timed conditions. Learn how the book is organized and become comfortable locating applicable requirements without searching randomly.

How 1 Exam Prep Helps You Reach Your Goal

1 Exam Prep supports Nevada A-19 Pipeline and Conduits candidates through organized study guidance, trade-focused review, practice-oriented preparation, reference navigation, and confidence-building study structure.

The A-19 examination covers a wide range of pipeline construction knowledge. This package brings together references for gas piping, water piping, excavation, safety, welding, paving, utility marking, and pipeline installation so candidates can build a study plan around the complete exam outline.

The NFPA 30, Flammable and Combustible Liquids Code, 2018 supports code preparation and exam-room reference navigation. Candidates can become familiar with the approved book before test day and practice locating relevant requirements efficiently.

The study-only references support the technical knowledge that must be learned before entering the exam. ASME B31.8 supports gas-pipeline preparation, the ductile iron and concrete-pipe references support water-pipeline study, Pipe and Excavation Contracting supports earthwork, and Pipe Welding Procedures supports the welding category.

OSHA material strengthens safety preparation, while the Hot Mix Asphalt Paving Handbook and Nevada One Call material help candidates prepare for pavement restoration and underground utility questions.

1 Exam Prep encourages candidates to connect these subjects instead of studying them as unrelated chapters. A successful pipeline installation involves planning, excavation, safe trench conditions, correct materials, proper joining, backfill, compaction, and restoration. Understanding the entire process can make individual exam questions easier to interpret.

The goal is to help candidates approach the Nevada A-19 Pipeline and Conduits Contractor examination with stronger trade knowledge, better reference-navigation skills, improved recall, and an organized preparation strategy without guaranteeing a passing score or licensing approval.

How many questions are on the Nevada A-19 exam?

The Nevada A-19 Pipeline and Conduits examination contains 60 questions.

How much time is allowed for the A-19 examination?

Candidates are allowed 2 hours to complete the examination.

How many correct answers are required to pass?

Candidates must answer 42 questions correctly to pass the A-19 examination.

Is the Nevada A-19 examination open book?

Yes. The Nevada A-19 Pipeline and Conduits examination is an open-book test with an approved reference permitted in the examination room.

Which book is allowed into the Nevada A-19 exam?

The NFPA 30, Flammable and Combustible Liquids Code, 2018 is the exam-room-approved reference included with this package.

Are the other books allowed into the exam?

No. OSHA, ASME B31.8, Pipefitter's Handbook, the ductile iron installation guide, Pipe and Excavation Contracting, Nevada One Call material, the concrete-pipe reference, Hot Mix Asphalt Paving Handbook, and Pipe Welding Procedures are study references and are not allowed into the examination.

How many gas piping questions are on the exam?

The examination includes 15 Gas Piping questions.

How many water piping questions are on the exam?

The examination includes 15 Water Piping questions.

Does the A-19 examination cover welding?

Yes. The examination includes 6 Welding questions.

Does the exam include excavation and grading?

Yes. Excavation, Compaction and Grading accounts for 8 questions.

Does the exam include Nevada One Call?

Yes. Nevada One Call accounts for 3 questions.

Why is the Hot Mix Asphalt Paving Handbook included?

Pipeline work can require restoration of paved surfaces after excavation. The handbook supports preparation involving asphalt placement, compaction, joints, equipment, and paving procedures.

Why is Pipe and Excavation Contracting included?

It supports preparation for trenching, excavation, shoring, backfilling, grading, compaction, equipment, and other earthwork involved in pipeline installation.

How should I prepare when most of the references cannot be taken into the exam?

Use the study-only references to build knowledge through repeated review, practice questions, and active recall. Practice with NFPA 30 separately so you can navigate the approved exam-room reference efficiently.

Does this package guarantee that I will pass the Nevada A-19 exam?

No. The package provides organized study references designed to support preparation. Examination results depend on each candidate's experience, trade knowledge, study, recall, reference-navigation skills, and performance on test day.