North Carolina Asbestos Contractor Books Allowed into Exam Package

Prepare for the North Carolina S(Asbestos) Contractor examination with the three references approved for use in the examination center. This focused exam-book package covers asbestos engineering controls, occupational exposure requirements, regulated work practices, respiratory protection, protective equipment, containment methods, and the safety principles associated with asbestos renovation and demolition work.

The North Carolina S(Asbestos) classification applies to renovation or demolition activities involving the repair, maintenance, removal, isolation, encapsulation, or enclosure of regulated asbestos-containing material. The classification covers this work in commercial, industrial, institutional, and residential buildings when regulated asbestos-containing material is involved.

Asbestos contracting requires careful control of airborne fibers and strict attention to worker protection, containment, respiratory equipment, decontamination, regulated areas, work methods, and waste handling. Candidates should be prepared to interpret technical information and apply safe work practices to different project conditions.

This package includes the official references identified for the North Carolina S(Asbestos) examination. Each reference supports a different part of the exam. Asbestos: Engineering Management and Control provides broad technical coverage of asbestos management and abatement methods. OSHA 29 CFR 1910.1001 establishes occupational asbestos requirements. Respiratory Protection Frequently Asked Questions supports review of respirator selection, use, limitations, fit, maintenance, and worker protection.

The examination is open book, but candidates should not expect to locate every answer without advance preparation. The test contains 60 questions and allows 120 minutes, giving candidates an average of approximately two minutes per question. Efficient reference navigation is therefore an important part of exam readiness.

Candidates should study the organization of each reference, identify major sections, and practice locating technical requirements under timed conditions. Understanding the material is just as important as finding it. Questions may require candidates to compare work practices, recognize unsafe conditions, apply exposure-control principles, or determine the correct response to a project scenario.

This product includes the three references listed below. It does not include an online course, highlighted books, tabbed books, application service, licensing fees, asbestos training, accreditation, project permits, or examination registration unless another product package specifically states that those services are included.

Exam Details

The North Carolina S(Asbestos) Contractor examination is administered for the North Carolina Licensing Board for General Contractors through computer-based testing.

The examination contains 60 questions. Candidates are allowed 120 minutes to complete the test and must earn a score of at least 70% to pass.

The official examination content outline divides the test into six subject areas:

• General Asbestos: 18 questions
• Respirators: 10 questions
• Mini Enclosures and Glove Bag: 5 questions
• Methods and Means: 24 questions
• Laws and Regulations: 2 questions
• Liens: 1 question

Methods and Means is the largest examination category. Candidates should be prepared to review practical procedures used to control asbestos fibers, establish regulated work areas, isolate work zones, protect workers, remove or manage asbestos-containing material, and complete cleanup activities.

General Asbestos questions may address asbestos characteristics, health hazards, terminology, exposure concerns, building materials, project evaluation, engineering controls, and recognized management principles.

Respirator questions may involve respirator types, protection factors, fit testing, medical evaluation, limitations, inspection, cleaning, storage, maintenance, worker responsibilities, and employer obligations.

Mini-enclosure and glove-bag questions may address the conditions under which these methods are used, preparation procedures, containment, negative pressure, worker protection, removal techniques, cleanup, and disposal.

Questions involving laws and regulations may test a candidate’s ability to recognize regulatory responsibilities associated with general contracting and asbestos work. The examination may also include trade-knowledge or general-industry-practice questions that are not answered through a simple word-for-word lookup.

A silent, non-printing, non-programmable calculator may be used in the examination center. Candidates may request a magnifying glass at the testing location.

Open Book Test

The North Carolina S(Asbestos) Contractor examination is open book. Candidates are responsible for bringing their own approved references to the examination center.

Only the references specifically allowed for the S(Asbestos) examination should be taken into the testing room. Candidates should bring complete publications rather than partial excerpts.

Reference materials may be highlighted, underlined, or indexed before the examination. Books may be prepared with permanent tabs that cannot be easily removed from the page. Removable tabs, page flags, and similar temporary markers are not permitted.

No notes may be written on the tabs. References may not be written in before or during the examination session. Candidates may not place loose sheets, attached notes, handwritten material, or additional papers inside the approved references.

Downloaded reference material must be properly bound before it is brought into the testing center. Loose or partial printed references are not accepted as exam materials.

Open-book preparation should include repeated practice with the actual approved references. Candidates should learn where major topics are located and how the terminology used in one reference relates to the others.

Useful lookup exercises include locating permissible exposure requirements, regulated-area rules, respiratory-protection provisions, hygiene practices, protective clothing requirements, engineering controls, warning signs, training responsibilities, medical surveillance provisions, and cleanup procedures.

Candidates should avoid spending too much time on a single question. When a lookup becomes difficult, it may be more effective to mark the question, continue through the examination, and return to it after completing easier items.

Licensing Steps

1. Review the S(Asbestos) classification. Confirm that the specialty classification matches the asbestos renovation or demolition work the business intends to perform.
2. Apply through the North Carolina Licensing Board for General Contractors. Submit the applicable license application or examination request and provide the required applicant and qualifier information.
3. Receive examination eligibility. After the Board approves the request, the candidate receives authorization and instructions for scheduling the examination.
4. Prepare with the approved references. Study general asbestos principles, respiratory protection, glove-bag methods, mini enclosures, work practices, laws, and lien-related topics.
5. Practice open-book navigation. Complete timed searches using the three approved examination references.
6. Schedule the examination. Use the eligibility instructions to select a computer-based testing appointment.
7. Pass the S(Asbestos) examination. Complete the 60-question examination within the 120-minute testing period and earn the required passing score.
8. Complete the contractor license process. Provide the financial, business, qualifier, and organizational information required for the requested license limitation.
9. Address asbestos accreditation requirements. Individuals performing regulated asbestos-management activities must hold the applicable North Carolina asbestos accreditation for their work responsibilities.
10. Complete project-specific requirements. Asbestos removal and demolition projects may require notifications, permits, trained personnel, and compliance with state and federal asbestos regulations.

State Requirements

The North Carolina Licensing Board for General Contractors regulates the S(Asbestos) contractor classification. The classification covers renovation and demolition activities involving regulated asbestos-containing material in commercial, industrial, institutional, and residential buildings.

Applicants must complete the licensing process established by the Board. Examination eligibility is issued after the Board reviews and approves the applicable application or examination request.

The individual who passes the examination serves as the qualifier for the license. The business must also satisfy the requirements associated with its requested license limitation and organizational structure.

North Carolina general contractor licenses are issued with monetary limitations that control the value of projects the licensee may undertake. Applicants must meet the financial requirements associated with the requested limitation.

Contractor licensing and asbestos accreditation are separate requirements. The general contractor license authorizes contracting within the approved classification and limitation, while asbestos accreditation applies to individuals performing specific asbestos-management activities.

The North Carolina asbestos program accredits individuals involved in asbestos inspection, management planning, project design, supervision, air monitoring, and removal activities. The accreditation required depends on the person’s duties.

Asbestos renovation and demolition projects may also require project notification or permitting through the state asbestos program. Contractors must follow applicable requirements for regulated asbestos-containing material, worker protection, emissions control, waste handling, and disposal.

Passing the contractor examination does not replace required asbestos training or individual accreditation. It also does not automatically issue a contractor license. Applicants must complete the Board’s full licensing process and satisfy the applicable financial, organizational, and qualifier requirements.

Licensed contractors and accredited asbestos professionals remain responsible for complying with OSHA requirements, North Carolina asbestos rules, project notification requirements, and any other standards that apply to the work.

Exam Room Approved Books

• Asbestos: Engineering Management and Control, Kenneth Cherry, 1988
  A technical asbestos reference covering hazard recognition, engineering controls, management practices, abatement planning, containment, removal methods, worker protection, project administration, and control of asbestos-containing materials.
• 29 CFR 1910.1001 - Asbestos, Occupational Safety and Health Administration
  The federal occupational asbestos standard addressing exposure limits, regulated areas, engineering controls, work practices, respiratory protection, protective clothing, hygiene facilities, communication of hazards, training, medical surveillance, and employer responsibilities.
• Respiratory Protection Frequently Asked Questions, Occupational Safety and Health Administration
  An OSHA respiratory-protection resource addressing respirator programs, medical evaluations, fit testing, respirator selection, proper use, maintenance, inspection, cleaning, storage, limitations, and worker protection.

Test Information and Study Materials

Begin preparation with the examination outline. Since Methods and Means contains 24 questions, candidates should devote substantial study time to work practices, containment, removal methods, engineering controls, cleanup, and project procedures.

General Asbestos is also a major category. Review the properties of asbestos, common asbestos-containing materials, routes of exposure, health risks, fiber-release concerns, project assessment, and the purpose of different control methods.

Respiratory protection should be studied as a complete program rather than as a list of respirator types. Candidates should understand why medical evaluation and fit testing are required, how respirators are selected, what affects performance, and how equipment must be inspected and maintained.

Glove-bag and mini-enclosure preparation should include setup, isolation, negative pressure, worker entry, material handling, removal methods, decontamination, cleanup, and disposal. Candidates should recognize when a method is appropriate and when additional controls may be required.

Use timed study sessions to reflect the two-hour exam period. A practical drill may include 30 questions in 60 minutes or 15 questions in 30 minutes. This helps candidates identify whether they are spending too long on technical lookups.

Create a reference map for each book. Record where respiratory protection, exposure control, regulated areas, work practices, protective clothing, hygiene, training, and medical surveillance are located. The map should be used during study rather than placed inside the exam references.

Practice answering questions from the surrounding context instead of searching only for identical wording. Examination questions may describe a work condition and require the candidate to determine which method, control, or protective measure applies.

Review incorrect answers directly in the references. Locate the supporting provision, read the surrounding material, and identify why the selected answer was incorrect. This approach builds technical understanding and improves future lookup speed.

How 1 Exam Prep Helps You Reach Your Goal

1 Exam Prep helps North Carolina asbestos contractor candidates organize the approved examination references into a focused study plan. Preparation can be divided into general asbestos knowledge, respiratory protection, mini enclosures, glove-bag work, methods and means, laws, and lien concepts.

Trade-focused review helps candidates connect regulatory language with the practical responsibilities of asbestos contractors. This includes containment, engineering controls, worker protection, regulated areas, decontamination, respiratory equipment, removal procedures, cleanup, and project safety.

Practice-oriented preparation encourages candidates to answer questions, locate the supporting material, review missed concepts, and repeat difficult searches. This process improves both technical knowledge and open-book navigation.

Reference-navigation practice helps candidates learn how the three approved materials work together. OSHA provisions may establish a requirement, while the engineering-management reference may provide broader context for applying that requirement on a project.

A structured study routine can help candidates manage the 60-question examination and two-hour time limit with greater confidence. No book package can guarantee a passing score, contractor license, accreditation, permit, or project approval. Results depend on the candidate’s preparation, experience, reference familiarity, application qualifications, and test-day performance.

FAQ Section

Is this package for the North Carolina S(Asbestos) Contractor examination?

Yes. It contains the three references identified as allowed materials for the North Carolina S(Asbestos) examination.

Is the North Carolina asbestos contractor examination open book?

Yes. Candidates may bring the approved references into the examination center when the materials comply with the testing rules.

How many questions are on the examination?

The S(Asbestos) examination contains 60 questions.

How much time is allowed?

Candidates are allowed 120 minutes to complete the examination.

What score is required to pass?

A score of at least 70% is required.

Which subject has the most questions?

Methods and Means is the largest category with 24 questions, followed by General Asbestos with 18 questions.

Can the references be highlighted?

Yes. Approved references may be highlighted, underlined, or indexed before the examination.

Are removable tabs allowed?

No. Tabs must be permanently attached and may not contain notes.

Can printed OSHA materials be taken into the exam?

Approved downloaded materials must be complete and properly bound. Loose pages and partial references are not accepted.

Does passing the examination provide asbestos accreditation?

No. Contractor licensing and individual asbestos accreditation are separate. Individuals performing regulated asbestos-management activities must hold the accreditation required for their duties.

Does the package include a course or application service?

No. This product includes the three approved examination references only. Courses and application services are included only when specifically stated in another package.

Does purchasing the books guarantee a passing score or license?

No. Passing and licensing depend on the candidate’s preparation, experience, qualifications, reference-navigation ability, application completion, and examination performance.