Understand Wyoming Electrical Licensing First

Wyoming has a statewide electrician licensing program. The Wyoming Electrical Board establishes licensing standards, while the Department of Fire Prevention and Electrical Safety handles the licensing process.

Wyoming electrical credentials include:

• Apprentice Electrician.
• Journeyman Electrician.
• Master Electrician.
• Electrical Contractor.
• Low Voltage Technician.
• Limited Technician.
• Low Voltage and Limited Electrical Contractor classifications.

These classifications have different experience requirements and scopes of work.

Start with the Wyoming Electrical Licensing page before beginning your application.

What Is a Wyoming Journeyman Electrician?

Wyoming law describes a Journeyman Electrician as a person licensed by the department who has the experience and technical knowledge needed to install and supervise electrical equipment in accordance with the National Electrical Code and applicable state and local requirements.

Journeymen can work with:

• Branch circuits.
• Feeders.
• Services.
• Raceways.
• Conductors and cables.
• Grounding and bonding.
• Motors and generators.
• Lighting and utilization equipment.
• Special occupancies and equipment.

Wyoming also requires a Journeyman Electrician performing electrical work in the state to be employed by a contractor holding a current Wyoming Electrical Contractor license.

So the journeyman credential proves your individual qualification. It does not automatically turn your pickup truck into an electrical contracting company.

Step 1: Become a Wyoming Apprentice Electrician

Most future journeymen start as apprentice electricians.

Wyoming requires a person who has never held a Wyoming Apprentice Electrician license to begin the licensing process shortly after starting qualifying employment.

As an apprentice, you gain supervised experience while also completing electrical classroom education.

Apprentices learn subjects such as:

Step 2: Complete 8,000 Hours of Electrical Experience

Wyoming's normal journeyman examination pathway requires 8,000 hours of electrical wiring experience over at least four years.

Your experience should include work involving planning, layout, NEC application, and electrical installation under the direct supervision of a qualifying electrician working for a licensed electrical contractor.

Wyoming expects experience in three broad categories:

• Residential electrical installation.
• Commercial electrical installation.
• Industrial electrical installation.

Normally, no more than 75% of your 8,000 hours may be concentrated in one category.

That rule helps produce electricians with a broader background. Four years spent installing exactly one type of device may make you very fast at that device, but Wyoming wants broader journeyman-level experience.

Step 3: Complete 576 Hours of Classroom Instruction

Work hours are only part of the standard Wyoming pathway.

Journeyman examination applicants must also document 144 hours per year, or 576 hours over four years, of successfully completed electrically related classroom instruction.

The education should come through an approved electrical apprenticeship training program.

Classroom subjects may include:

• Electrical theory.
• National Electrical Code.
• Blueprints and electrical plans.
• Services and feeders.
• Branch circuits.
• Motors and generators.
• Grounding and bonding.
• Electrical calculations.
• Safety practices.

Official transcripts should show the credit hours or actual classroom hours completed.

Step 4: Know the Alternative Education Path

Wyoming provides an alternative for certain experienced applicants who cannot provide the normal 576 classroom hours.

Under the current licensing information, an applicant may be considered if they can document 10 years and 20,000 hours of qualifying on-the-job training experience and receive approval from the Chief Electrical Inspector.

Applicants considering this route should contact Wyoming Electrical Safety before assuming their experience qualifies.

Step 5: Understand Electrical School Credit

Wyoming may also grant credit for qualifying electrically related education that goes beyond the required 576 apprenticeship classroom hours.

Up to two years, or 4,000 hours, of credit may be available for qualifying study through an accredited electrical school when the coursework exceeds the required apprenticeship education.

The state reviews the documentation before deciding how much credit can be applied.

Do not simply subtract 4,000 hours from your work requirement because you own a diploma. Submit your transcripts and let the licensing authority determine the actual credit.

Step 6: Keep Detailed Work Records

Wyoming requires applicants to prove their experience.

Acceptable documentation may include:

• Wyoming work-verification forms.
• Notarized employer letters.
• Notarized letters from local unions.
• Official letters from licensing boards.
• Documentation showing actual hours worked.
• Descriptions of the character of the electrical work.

Keep your records organized throughout your apprenticeship.

Trying to reconstruct 8,000 hours several years later can quickly turn into electrical archaeology.

Step 7: Military Electrical Experience May Count

Wyoming may consider qualifying electrical experience and education earned through military service.

Applicants using military experience should be prepared to provide a DD-214.

Wyoming also allows applicants to submit a Joint Service Transcript, or JST, to help document electrically related courses.

Military applicants should provide as much detail as possible about training, duties, hours, and electrical work performed.

Step 8: Apply for the Wyoming Journeyman Examination

Once your work experience and education are ready, apply through the Wyoming State Fire Marshal's electrical licensing portal.

The process generally includes:

1. Create your eLicense portal account.
2. Upload a government-issued ID.
3. Wait for your identity to be verified.
4. Select the Journeyman Electrician examination application.
5. Complete the requested information.
6. Upload work-verification documents.
7. Upload apprenticeship education documents.
8. Electronically sign and submit the application.
9. Wait for the state's eligibility decision and examination instructions.

Use the official Wyoming licensing page for the current application instructions.

Step 9: Understand the Wyoming Journeyman Electrician Exam

Wyoming's Journeyman Electrician examination is commonly identified as ICC exam 385 Wyoming Journeyman Electrician.

The latest published ICC Wyoming bulletin lists:

• 80 multiple-choice questions.
• 4-hour time limit.
• Open-book format.
• Pearson VUE testing.
• $115 examination fee.
• 70% Wyoming journeyman passing requirement.

Eighty questions in four hours gives you an average of about three minutes per question.

Three minutes can disappear surprisingly fast when a question involves a load calculation, a conductor table, two exceptions, and the sudden feeling that every NEC article has moved since yesterday.

Step 10: Pay Attention to Wyoming's 2026 NEC Change

This is currently the most important exam-preparation detail for Wyoming candidates.

Wyoming's official Electrical Safety website states that the 2026 National Electrical Code became effective July 1, 2026.

Wyoming's licensing page also states that licensing examinations are based on the current edition of the National Electrical Code.

However, the latest published ICC Wyoming Electrical Examination Bulletin available at the time of this guide was published before that change and still lists the 2023 NEC for exam 385.

Candidates studying the newly adopted code can review the 2026 Wyoming Journeyman Electrician Study Guide & NEC Combo.

Step 11: Know the Main Exam Topics

The Wyoming journeyman examination tests far more than basic definitions.

Major study areas include:

Step 12: Practice NEC Navigation

An open-book examination is not an invitation to read the NEC for four hours.

Practice locating:

• Article 100 definitions.
• Branch circuit requirements.
• Feeder requirements.
• Service requirements.
• Conductor ampacity tables.
• Grounding and bonding rules.
• Overcurrent protection.
• Raceway requirements.
• Box and enclosure rules.
• Motors.
• Transformers.
• Special occupancies.
• Special equipment.

Train yourself to recognize the subject of the question before touching the code book.

Once you know the likely article, you can move much faster.

Step 13: Practice Electrical Calculations

Journeyman electricians need to understand electrical theory and calculations, not just code language.

Practice:

• Ohm's Law.
• Electrical power.
• Series and parallel circuits.
• Branch circuit calculations.
• Feeder calculations.
• Service load calculations.
• Conductor sizing.
• Adjustment and correction factors.
• Voltage drop.
• Motors.
• Transformers.
• Box fill.
• Raceway fill.

Work the problems yourself.

Reading a completed calculation and thinking, "Yep, numbers happened," is not quite the same thing as solving it under a clock.

Step 14: Use Timed Practice Exams

The Wyoming exam is long enough that pacing matters.

A strong study routine is:

1. Review one exam topic.
2. Complete practice questions.
3. Find every answer in the correct reference.
4. Review all incorrect answers.
5. Repeat weak calculations.
6. Track your NEC lookup time.
7. Complete full timed practice examinations.

Candidates can review the 2026 Wyoming Journeyman Electrician Exam Prep + Flash Card Combo for repeated practice and review.

Wyoming Journeyman Electrician Exam Prep Resources

1 Exam Prep offers several Wyoming-specific study options.

What Happens After You Pass?

Wyoming requires Journeyman Electrician applicants to earn at least a 70% passing score.

Once you pass, you upload your passing documentation through your eLicense portal and complete the final licensing process.

The current initial Journeyman Electrician license fee is $100.

Keep copies of:

• Your work-verification forms.
• Apprenticeship transcripts.
• Exam authorization.
• Passing score documentation.
• Your Wyoming license.
• Continuing education certificates.

Wyoming Journeyman Electrician Continuing Education

Wyoming Journeyman Electrician licenses are currently valid for three years.

Before renewal, journeymen must complete at least 16 hours of approved update education.

Of those 16 hours:

• At least 8 hours must specifically cover the National Electrical Code.
• Courses must have prior Wyoming Electrical Board approval.
• The hours must be completed during the applicable license period.

The current journeyman renewal fee is $50.

Review the Wyoming licensing page before every renewal cycle.

Does Wyoming Have Journeyman Reciprocity?

Yes. Wyoming currently maintains journeyman reciprocity agreements with several states.

The official licensing page currently lists:

• Alaska.
• Arkansas.
• Colorado.
• Idaho.
• Iowa.
• Maine.
• Minnesota.
• Montana.
• Nebraska.
• New Hampshire.
• New Mexico.
• North Dakota.
• Oklahoma.
• Oregon.
• South Dakota.
• Texas.
• Utah.

Reciprocity is not automatic.

Wyoming currently requires reciprocal journeyman applicants to have earned the originating license by examination with a score of at least 70%, held it for at least one year, maintained good standing, and satisfied Wyoming's experience and education requirements.

Reciprocity generally exempts the applicant from the Wyoming examination, not from the rest of Wyoming's licensing requirements.

Journeyman Electrician vs. Electrical Contractor

A Wyoming Journeyman Electrician license is an individual credential.

Wyoming Electrical Contractors have separate licensing requirements.

A licensed electrical contractor must employ a Wyoming licensed Master Electrician in a full-time capacity to serve as the company's Master of Record.

If your goal is eventually to own or qualify an electrical contracting company, you will need to understand both the individual electrician requirements and the business-level contractor requirements.

Want to Become a Wyoming Master Electrician Later?

The Journeyman Electrician license can become the foundation for Wyoming's Master Electrician license.

The current master-exam qualification route requires eight years and 16,000 hours of electrical wiring experience.

Of that experience, four years and 8,000 hours must be documented as a licensed Journeyman Electrician.

The master applicant must also satisfy Wyoming's electrical classroom education requirements.

If Master Electrician is your long-term goal, begin documenting your journeyman experience from day one.

A Simple Wyoming Journeyman Electrician Roadmap

1. Register as a Wyoming Apprentice Electrician.
2. Work under qualifying electrical supervision.
3. Complete four years and 8,000 hours of qualifying electrical experience.
4. Build experience across residential, commercial, and industrial work.
5. Complete 576 hours of qualifying electrical classroom education.
6. Keep detailed OJT and education records.
7. Create your Wyoming eLicense account.
8. Submit your Journeyman Electrician examination application.
9. Upload work-verification and education documents.
10. Receive examination authorization.
11. Confirm the current NEC edition and ICC exam references.
12. Practice NEC navigation and electrical calculations.
13. Complete timed practice examinations.
14. Take the Wyoming Journeyman Electrician examination.
15. Earn at least the required 70% score.
16. Upload your passing documentation.
17. Pay the license fee and receive your journeyman credential.
18. Complete 16 hours of approved continuing education during each three-year licensing period.

Helpful Wyoming Journeyman Electrician Resources

Frequently Asked Questions

Here are common questions and answers about becoming a licensed Journeyman Electrician in Wyoming.

Key Takeaways

• Wyoming licenses Journeyman Electricians statewide. The standard examination route requires four years and 8,000 hours of qualifying electrical experience plus 576 hours of electrical classroom instruction.
• Your experience should be broad. Wyoming expects residential, commercial, and industrial work, and normally no more than 75% of the required hours may come from one category.
• The latest published ICC bulletin lists 80 questions, four hours, and an open-book exam format. Wyoming requires a 70% passing score.
• Watch the NEC transition carefully. Wyoming adopted the 2026 NEC effective July 1, 2026, while the latest published ICC bulletin found for exam 385 still lists the 2023 NEC. Verify the current exam-day reference before testing.
• Licensing continues after you pass. The current journeyman license is valid for three years and requires 16 hours of approved continuing education, including at least 8 NEC hours.

Final Thoughts Before You Start

Becoming a Wyoming Journeyman Electrician is a long process, but the roadmap is much easier to understand when you divide it into apprenticeship, experience, education, documentation, testing, and licensing.

For most candidates, the process begins as an apprentice. Over the next four years, you build at least 8,000 hours of electrical experience while completing 576 hours of related classroom instruction. Those years are where you learn the difference between understanding a diagram on paper and making an actual electrical installation work safely in the real world.

Pay attention to the type of experience you are getting. Wyoming expects journeyman applicants to have exposure to residential, commercial, and industrial installations. Normally, no more than 75% of your experience can be concentrated in one category. That means broad training is not just useful for your career. It is part of the licensing plan.

Keep your documentation organized from the start. Save transcripts, employer information, OJT forms, notarized letters, apprentice records, and anything else that can prove what you did and how long you did it. Eight thousand hours is a lot easier to document while you are earning them than four years later when everyone involved has changed jobs and nobody remembers where the paperwork went.

Once you become eligible for the exam, focus heavily on NEC navigation, electrical theory, and calculations. Wyoming's latest published exam outline covers services, feeders, branch circuits, conductors, wiring methods, equipment, motors, generators, and special installations. Do not rely on field experience alone. A licensing exam wants you to know what the code says, not what somebody once told you on a jobsite.

The biggest issue for current candidates is the NEC edition. Wyoming officially moved to the 2026 NEC on July 1, 2026, and the state says licensing exams are based on the current NEC. However, the latest published ICC Wyoming bulletin located for exam 385 was issued before the change and still lists the 2023 NEC. That makes verification especially important right now.

Before buying your final exam books or walking into Pearson VUE, check the current ICC exam catalog and your authorization information. Bring the edition the testing program actually requires. Owning the newest NEC is useful. Bringing the wrong NEC to an open-book exam is considerably less useful.

After passing, keep learning. Wyoming requires continuing education during each three-year licensing period, and journeyman experience can later help you qualify for the Master Electrician examination.

When you are ready to organize your preparation, explore the 2026 Wyoming Journeyman Electrician Super Combo from 1 Exam Prep. Field experience teaches you how electrical work gets done. Focused exam preparation helps turn that experience into faster code navigation, stronger calculations, better pacing, and a more confident approach to Wyoming licensing.