Alabama Roofing and Sheet Metal Contractor - Highlighted and Tabbed Book Package

The Alabama Roofing and Sheet Metal Contractor Book Package - Highlighted and Tabbed provides a focused set of roofing, building-code, estimating, and construction-safety references for candidates preparing for the Alabama Roofing and Sheet Metal Contractor examination. Every book in this package is highlighted and tabbed for exam preparation, helping candidates become familiar with important sections while developing the reference-navigation skills needed for an open-book contractor exam.

Roofing and sheet metal work requires knowledge that extends beyond installing roofing materials. Contractors may need to understand estimating, plan reading, substrate and surface preparation, steep-slope roofing, low-slope and membrane roofing, waterproofing, flashing, drainage, roof components, building-code requirements, and OSHA construction safety. The Alabama examination reflects these responsibilities and evaluates candidates across several important roofing subjects.

This package includes the Code of Federal Regulations - 29 CFR Part 1926 (OSHA); International Building Code, 2021; Roofing Construction and Estimating by Daniel Atcheson, 1995; NRCA Roofing Manual: Steep Slope Roof Systems; and NRCA Roofing Manual: Membrane Roofing Systems.

The books are professionally highlighted and tabbed for exam preparation. Permanent tabs help create convenient navigation points for important subjects, while highlighting can make key information easier to recognize during study. Candidates should use the prepared books throughout their preparation so the navigation system becomes familiar before test day.

The Alabama Roofing and Sheet Metal Contractor examination is an open-book test administered by PSI as part of the licensing process overseen by the Alabama Licensing Board for General Contractors. Alabama recognizes Roofing & Sheet Metal within its Building Construction specialty classification structure under Moisture Protection.

Please allow up to 15 business days for tabbed and highlighted book package orders.

Exam Details

The Alabama Roofing and Sheet Metal Contractor examination is administered by PSI for applicants pursuing the applicable classification through the Alabama Licensing Board for General Contractors.

• Exam: Alabama Roofing and Sheet Metal Contractor
• Testing Provider: PSI
• Number of Questions: 60
• Time Allowed: 150 minutes
• Passing Score: 70%, or 42 correct answers
• Exam Type: Open book

The examination covers major areas of roofing trade knowledge, including estimating and plan reading, surface preparation and planning, steep- and low-slope roofing systems, built-up roofing and waterproofing, roofing components, and safety.

Steep- and low-slope roofing represents a particularly important area of preparation because roofing contractors must understand different roof systems, materials, substrates, installation practices, flashing details, moisture protection, and system components. The NRCA roofing manuals provide specialized information that candidates can use when studying these subjects.

Estimating and plan reading also deserve focused preparation. Roofing contractors regularly need to interpret dimensions, plans, slopes, roof areas, material quantities, and construction details. Roofing Construction and Estimating provides a trade-focused reference for reviewing these concepts.

With 60 questions and 150 minutes available, candidates have an average of approximately two and a half minutes per question. Time management is therefore an important part of exam preparation. Candidates who know which book is most likely to contain the answer can generally use their references more efficiently than candidates who search through several books for every question.

Open Book Test

The Alabama Roofing and Sheet Metal Contractor examination is an open-book test. Approved reference materials may be used in the examination center according to PSI's testing rules.

The highlighted and tabbed preparation included with this package is designed to support more efficient book navigation. Permanent tabs can help candidates move directly to major chapters and subjects, while highlighting can make useful information stand out during repeated study.

Open book does not mean that every answer should be researched from the beginning during the examination. The strongest approach is to understand the roofing concepts being tested and use the books to confirm details, locate technical requirements, review tables, or answer questions that require specific reference information.

For example, OSHA is the natural reference for construction safety topics. The International Building Code supports applicable building and roofing code requirements. Roofing Construction and Estimating supports estimating, measurements, quantities, and roofing construction practices.

The NRCA Roofing Manual: Steep Slope Roof Systems supports study of steep-slope systems and their components, while the NRCA Roofing Manual: Membrane Roofing Systems supports low-slope and membrane roof system preparation. Learning these relationships before test day can save valuable time.

Candidates should use the prepared tabs repeatedly while studying. The goal is to reach a point where choosing the correct book and locating a major subject becomes familiar rather than something that must be figured out during the examination.

Licensing Steps

The Alabama Licensing Board for General Contractors oversees contractor licensing for classifications regulated under Alabama general contractor law. Roofing & Sheet Metal is recognized as a specialty classification under Building Construction and Moisture Protection.

1. Identify the appropriate classification. Determine that Roofing & Sheet Metal corresponds with the type of contracting work your business intends to perform.
2. Select the appropriate application. Alabama maintains separate application processes for prime contractors and subcontractors.
3. Complete the licensing application. Applicants must provide the information and supporting documentation required by the Alabama Licensing Board for General Contractors.
4. Document qualifying experience. Applicants seeking a classification must demonstrate relevant work experience that supports the requested scope.
5. Provide required work and project references. Alabama uses documented project history and qualifying references when evaluating contractor classifications.
6. Receive examination eligibility. Applicants must complete the applicable state application process before proceeding with required testing.
7. Schedule the Roofing and Sheet Metal Contractor examination. Eligible candidates can schedule the applicable trade examination through PSI.
8. Pass the trade examination. Candidates must earn a minimum score of 70%, or 42 correct answers out of 60 questions.
9. Complete applicable Business and Law testing. Alabama applicants subject to contractor examination requirements must complete the required Business and Law examination in addition to the applicable trade exam.
10. Complete remaining licensing requirements. Final classification approval and license issuance are determined by the Alabama Licensing Board for General Contractors.

Passing the Roofing and Sheet Metal examination is only one part of the licensing process. Applicants must also satisfy Alabama's experience, application, classification, and other requirements associated with their licensing path.

State Requirements

The Alabama Licensing Board for General Contractors classifies contractors according to the types of work they are qualified to perform. Within the Building Construction specialty classifications, Moisture Protection includes Roofing & Sheet Metal along with related specialties.

Applicants must support their requested classification with documented construction experience. Alabama application materials require work and project references demonstrating experience in the classification being requested.

Alabama's general contractor licensing law applies to covered construction undertakings where the total cost of the project, including labor and materials, is $100,000 or more. The current $100,000 threshold became effective October 1, 2024.

Subcontractors performing covered work at the applicable statutory threshold are also subject to Alabama contractor licensing requirements. Prime contractors and subcontractors follow separate application processes.

Roofing contractors should make sure the classification requested matches their documented experience and intended scope. Roofing work can involve steep-slope systems, low-slope systems, waterproofing, sheet metal details, roof components, flashing, safety, and related moisture-protection work. The Board determines final classification approval based on the applicant's qualifications and documented project history.

Reference Books

• Code of Federal Regulations - 29 CFR Part 1926 (OSHA)
  This federal construction safety reference supports preparation involving fall protection, ladders, scaffolds, personal protective equipment, material handling, tools, electrical hazards, and other safety requirements applicable to roofing and sheet metal work.
• International Building Code, 2021
  The 2021 International Building Code provides requirements applicable to commercial building construction, including roofing assemblies, roof coverings, materials, structural considerations, weather protection, and other code-related topics relevant to roofing projects.
• Roofing Construction and Estimating, Daniel Atcheson, 1995
  This roofing trade reference supports preparation involving estimating, roof measurements, materials, quantities, construction methods, roofing terminology, and practical concepts used in roofing work.
• NRCA Roofing Manual: Steep Slope Roof Systems
  This specialized roofing reference provides technical information related to steep-slope roofing systems, materials, design considerations, components, details, and installation practices.
• NRCA Roofing Manual: Membrane Roofing Systems
  This NRCA reference supports study involving membrane and low-slope roofing systems, roofing materials, assemblies, details, installation practices, waterproofing concepts, and system components.

Book Preparation: All books are highlighted and tabbed for exam preparation.

Order Processing: Please allow up to 15 business days for tabbed and highlighted book package orders.

Test Information and Study Materials

A productive study strategy should begin by dividing preparation into the major areas represented on the exam. Estimating and Plan Reading, Surface Preparation and Planning, Steep and Low Slope Roofing, Roofing Components, and Safety should each receive dedicated review.

For estimating and plan reading, practice calculating and interpreting roof dimensions, slopes, quantities, and construction details. Roofing Construction and Estimating is a central resource for these subjects. Candidates should become comfortable with roofing terminology and the relationship between plans, measurements, materials, and field installation.

Surface preparation and planning should include understanding existing substrates, preparation requirements, moisture protection, sequencing, and the conditions that affect roof installation. Good roofing performance begins with proper preparation, making this area important both for the exam and for field practice.

Steep-slope roofing preparation should focus on roof systems, materials, underlayments, flashing, drainage, fastening, penetrations, valleys, ridges, and related components. Use the NRCA Steep Slope Roof Systems manual as a primary reference while practicing navigation with the permanent tabs.

For low-slope and membrane roofing, work with the NRCA Membrane Roofing Systems manual. Review assemblies, membrane materials, insulation, flashing, roof edges, penetrations, drainage, waterproofing, and installation details. Candidates should understand the differences between steep-slope and membrane systems and know which reference applies to each type of question.

Safety deserves consistent preparation because roofing work presents significant fall, ladder, access, material-handling, and equipment hazards. Use OSHA throughout your study period rather than leaving safety review until the end.

The International Building Code should also be used regularly. Become familiar with its organization and practice locating roofing and building requirements using the index and applicable chapters. Code navigation becomes faster when candidates know the general subject area before beginning a search.

Because every book in this package is highlighted and tabbed, candidates can practice with the same navigation system throughout their preparation. Select a topic, identify the correct reference, use the tabs to locate the relevant section, and review the highlighted material. Repeating this process helps build both trade knowledge and book familiarity.

How 1 Exam Prep Helps You Reach Your Goal

1 Exam Prep supports Alabama Roofing and Sheet Metal Contractor candidates through organized study guidance, roofing-focused review, practice-oriented preparation, reference navigation, and confidence-building study structure.

The Roofing and Sheet Metal exam covers both technical roofing knowledge and construction safety, so candidates benefit from organizing preparation around the published trade areas. Instead of reading every reference from front to back without direction, study can focus on estimating, surface preparation, steep-slope systems, low-slope systems, roofing components, waterproofing, and safety.

The highlighted and tabbed books help candidates establish a consistent reference-navigation system. Permanent tabs make major topics easier to locate, while highlighting can draw attention to material that deserves review during study.

Practice-oriented preparation can also help identify weaker subjects. A contractor with extensive steep-slope roofing experience may need additional review of membrane systems or estimating, while someone experienced in commercial low-slope work may need more preparation involving steep-slope systems, code requirements, or OSHA.

Reference navigation is especially important during an open-book exam with a limited testing period. Candidates should practice deciding which book applies before opening a reference. Knowing that a safety question belongs in OSHA or that a membrane system question belongs in the NRCA membrane manual can reduce unnecessary searching.

The Alabama Roofing and Sheet Metal Contractor Book Package - Highlighted and Tabbed gives candidates a focused set of prepared references that can be used throughout study to strengthen roofing knowledge and build familiarity with the materials associated with the PSI examination.

How many questions are on the Alabama Roofing and Sheet Metal Contractor exam?

The examination contains 60 questions. Candidates are allowed 150 minutes to complete the test.

What score is required to pass?

The minimum passing score is 70%, which equals 42 correct answers out of 60 questions.

Is the Alabama Roofing and Sheet Metal Contractor exam open book?

Yes. The examination is open book and permits approved references under PSI's examination rules.

Are the books highlighted and tabbed?

Yes. All books included in this package are highlighted and tabbed for exam preparation.

How long should I allow for my highlighted and tabbed book order?

Please allow up to 15 business days for tabbed and highlighted book package orders.

What subjects are covered on the Roofing and Sheet Metal exam?

The examination covers estimating and plan reading, surface preparation and planning, steep- and low-slope roofing including built-up roofing and waterproofing, roofing components, and construction safety.

Does this package include OSHA?

Yes. Code of Federal Regulations - 29 CFR Part 1926 is included for construction-safety preparation.

Which building code is included?

The package includes the International Building Code, 2021.

Does this package include both steep-slope and membrane roofing references?

Yes. The package includes NRCA Roofing Manual: Steep Slope Roof Systems and NRCA Roofing Manual: Membrane Roofing Systems.

Does the package include a roofing estimating reference?

Yes. Roofing Construction and Estimating by Daniel Atcheson, 1995 is included for roofing estimating, measurements, materials, and construction preparation.

Who administers the Alabama Roofing and Sheet Metal Contractor examination?

PSI administers the examination as part of the licensing process overseen by the Alabama Licensing Board for General Contractors.

Is Roofing and Sheet Metal an Alabama contractor classification?

Yes. Roofing & Sheet Metal is recognized within Alabama's Building Construction specialty classifications under Moisture Protection.