Alabama Telecommunication Projects Contractor Exam Book Package

The Alabama Telecommunication Projects Contractor Exam Book Package brings together the technical references used to prepare for the Alabama Telecommunication Projects Contractor examination administered by PSI. This package is designed for contractors and construction professionals working with telecommunications infrastructure, antennas, underground cabling, foundations, concrete, steel erection, welding, rigging, excavation, erosion control, and construction safety.

Telecommunication construction can involve much more than installing communication cable. Depending on the project, contractors may be responsible for underground conduit and cabling, antenna systems, tower-related work, concrete foundations, structural steel, welding, hoisting, excavation, erosion and sedimentation control, and protection of existing underground utilities. The Alabama examination reflects this broad construction scope.

This package includes the Code of Federal Regulations - 29 CFR Part 1926 (OSHA); Alabama 1Call – Dig Safely; AL Act 94-487 S.299; Storm Water Management for Construction Activities, 1992; Handbook of Rigging, 5th Edition, 2009; Antenna Toolkit, 2nd Edition, 2001; Design and Control of Concrete Mixtures, 17th Edition; Modern Welding, 2013; Pipe and Excavation Contracting; and Data, Voice, and Video Cabling.

The Alabama Telecommunication Projects Contractor examination is an open-book test. Candidates may use approved reference materials under PSI's examination rules, making direct familiarity with the books an important part of preparation. Candidates should understand the technical concepts while also developing the ability to determine which reference applies to a question and locate supporting information efficiently.

Telecommunication Projects is recognized as a specialty within Alabama's Municipal & Utility contractor classification structure. The Alabama Licensing Board for General Contractors oversees classification and licensing, while PSI administers the applicable trade examination.

What You Get

• Code of Federal Regulations - 29 CFR Part 1926 (OSHA)
• Alabama 1Call – Dig Safely; AL Act 94-487 S.299
• Storm Water Management for Construction Activities, 1992
• Handbook of Rigging, 5th Edition, 2009
• Antenna Toolkit, 2001, 2nd Edition
• Design and Control of Concrete Mixtures, 17th Edition
• Modern Welding, 2013
• Pipe and Excavation Contracting
• Data, Voice, and Video Cabling

Together, these references provide a focused technical library for preparing across telecommunications systems, antennas, cabling, concrete foundations, steel erection, welding, underground construction, hoisting, safety, erosion control, and Alabama One Call requirements.

Exam Details

The Alabama Telecommunication Projects Contractor examination is administered by PSI for applicants pursuing the applicable contractor classification through the Alabama Licensing Board for General Contractors.

• Exam: Alabama Telecommunication Projects Contractor
• Testing Provider: PSI
• Number of Questions: 45
• Time Allowed: 120 minutes
• Passing Score: 70%, or 32 correct answers
• Exam Type: Open book

The examination content outline includes 7 questions in MATV and Cable TV Systems, 7 in Antennas, 8 in Foundations and Concrete, 8 in Steel Erection and Welding, 6 in Safety, 2 in Erosion and Sedimentation Control, 2 in One Call, 2 in Underground Cabling, 2 in Hoisting, and 1 in Sitework.

Foundations and Concrete and Steel Erection and Welding are the two largest categories, with 8 questions each. MATV and Cable TV Systems and Antennas each contain 7 questions. These four categories account for 30 of the 45 questions and should receive substantial attention during preparation.

Safety contains 6 questions and is another important part of the examination. Telecommunications infrastructure projects can involve excavation, work at elevation, structural erection, lifting operations, welding, tools, and other hazards that require strong construction-safety knowledge.

Erosion and Sedimentation Control, One Call, Underground Cabling, and Hoisting each contain 2 questions, while Sitework contains 1. These smaller categories should still be included in a complete study plan because every question contributes toward the required passing score.

Open Book Test

The Alabama Telecommunication Projects Contractor examination is an open-book test. PSI allows approved reference materials into the examination center under its reference-material rules.

Approved references may be highlighted, underlined, and indexed. Permanent tabs may be used for navigation. References must otherwise remain unmarked and may not contain additional papers, whether loose or attached. Temporary tabs such as Post-it notes are not permitted.

The approved references are not provided at the examination center. Candidates are responsible for bringing the permitted books they intend to use during the test.

With 45 questions and 120 minutes available, candidates have an average of a little more than two and a half minutes per question. Efficient reference navigation can therefore be useful. Candidates should practice recognizing the subject of a question before selecting a book.

Data, Voice, and Video Cabling supports MATV, cable TV, and structured cabling preparation. Antenna Toolkit supports antenna-related topics. Design and Control of Concrete Mixtures supports foundations and concrete, while Modern Welding supports welding knowledge. Handbook of Rigging supports hoisting and lifting operations.

Pipe and Excavation Contracting supports underground cabling, excavation, and sitework. Storm Water Management for Construction Activities supports erosion and sedimentation control, while Alabama 1Call supports underground utility notification requirements. OSHA supports safety questions across the entire construction process.

Licensing Steps

The Alabama Licensing Board for General Contractors regulates contractor classifications subject to Alabama general contractor law. Telecommunication Projects is recognized as a specialty within the Municipal & Utility classification.

1. Identify the appropriate classification. Determine that Telecommunication Projects matches the type of telecommunications infrastructure work your business intends to perform.
2. Select the appropriate application type. Alabama maintains separate application processes for prime contractors and subcontractors.
3. Complete the contractor application. Provide the information and supporting documentation required by the Alabama Licensing Board for General Contractors.
4. Document qualifying experience. Applicants must provide relevant work experience supporting the classification requested.
5. Provide required work and project references. The Board evaluates documented construction experience when determining classification eligibility.
6. Receive examination eligibility. Applicants must complete the applicable state process before proceeding with PSI testing.
7. Schedule the Telecommunication Projects Contractor exam. Eligible candidates can register for the trade examination through PSI.
8. Pass the trade examination. Candidates must achieve at least 70%, or 32 correct answers out of 45 questions.
9. Complete Business and Law. Alabama applicants subject to contractor testing requirements must complete the applicable Trade examination as well as Business and Law.
10. Complete remaining licensing requirements. Final classification and license approval are determined by the Alabama Licensing Board for General Contractors.

Passing the trade examination is one component of the licensing process. Applicants must also satisfy the Board's experience, application, classification, financial, and other applicable requirements before a license is issued.

State Requirements

Telecommunication Projects is recognized within Alabama's Municipal & Utility specialty classification structure. Municipal & Utility work includes clearing, grubbing, paving, curbs, gutters, walks, alleys, driveways, sewer projects, water projects, gas projects, electric projects, telephone projects, and work incidental to those activities.

Applicants with qualifying experience may request Telecommunication Projects as a specialty rather than applying for the entire Municipal & Utility major classification. The Board bases classification decisions on documented construction experience.

Alabama's general contractor licensing law applies to covered construction undertakings with a total cost of $100,000 or more, including labor and materials. The current $100,000 threshold became effective October 1, 2024.

Subcontractors performing covered work at the applicable statutory threshold are also subject to Alabama contractor licensing requirements. Prime contractors and subcontractors follow separate application processes.

Applicants should document telecommunications-related construction experience that supports the classification requested. Relevant projects can involve communications infrastructure, underground utilities, cabling, antenna systems, concrete foundations, structural support work, and related municipal or utility construction.

Reference Books

• Code of Federal Regulations - 29 CFR Part 1926 (OSHA)
  This federal construction-safety reference supports preparation involving excavation, fall protection, personal protective equipment, scaffolds, tools, electrical hazards, steel erection, lifting operations, welding, and other construction safety requirements.
• Alabama 1Call – Dig Safely; AL Act 94-487 S.299
  This Alabama-specific reference supports preparation involving underground utility notification and safe digging requirements before excavation work begins.
• Storm Water Management for Construction Activities, 1992
  This reference supports study of erosion control, sediment management, stormwater runoff, and construction-site practices intended to reduce environmental impacts.
• Handbook of Rigging, 5th Edition, 2009
  This technical reference supports preparation involving rigging equipment, load handling, lifting procedures, slings, hardware, calculations, and safe hoisting practices.
• Antenna Toolkit, 2001, 2nd Edition
  This telecommunications reference supports antenna-related preparation, including antenna principles, installation considerations, radio-frequency concepts, and communication-system applications.
• Design and Control of Concrete Mixtures, 17th Edition
  This concrete reference provides information on materials, mixture properties, proportioning, production, placement, curing, durability, and quality control applicable to telecommunications foundations and concrete construction.
• Modern Welding, 2013
  This welding reference supports preparation involving welding processes, equipment, joint preparation, materials, techniques, terminology, fabrication, and safety relevant to telecommunications support structures.
• Pipe and Excavation Contracting
  This trade reference supports excavation, trenching, underground installation, grading, soil conditions, equipment, and other field practices relevant to underground telecommunications construction.
• Data, Voice, and Video Cabling
  This telecommunications reference supports preparation involving structured cabling, data networks, voice systems, video cabling, cable types, installation methods, termination, testing, and related communications infrastructure.

Exam Room Approved Books

The PSI reference list for the Alabama Telecommunication Projects Contractor examination identifies the following materials for use in the examination center:

• Code of Federal Regulations - 29 CFR Part 1926 (OSHA)
  Used for construction-safety preparation.
• Alabama 1Call – Dig Safely; AL Act 94-487 S.299
  Used for Alabama underground utility notification topics.
• Storm Water Management for Construction Activities, 1992
  Used for erosion and sedimentation control preparation.
• Handbook of Rigging, 5th Edition, 2009
  Used for hoisting and rigging preparation.
• Antenna Toolkit, 2nd Edition, 2001
  Used for antenna-system preparation.
• Design and Control of Concrete Mixtures
  Used for foundations and concrete preparation. PSI identifies the 16th Edition in its reference list and permits later editions of non-code references as they become available; this package includes the 17th Edition.
• Modern Welding, 2013
  Used for steel erection and welding preparation.
• Pipe and Excavation Contracting
  Used for underground cabling, excavation, and sitework preparation.
• Data, Voice, and Video Cabling
  Used for MATV, cable TV, data, voice, video, and related cabling preparation.

PSI permits approved references to be highlighted, underlined, indexed, and permanently tabbed. Temporary tabs are not allowed, and candidates must bring their own permitted books to the examination center.

Test Information and Study Materials

A productive study plan should begin with the four largest content areas: Foundations and Concrete, Steel Erection and Welding, MATV and Cable TV Systems, and Antennas. Together, these categories account for 30 of the 45 questions.

For Foundations and Concrete, review concrete materials, placement, curing, durability, and construction principles using Design and Control of Concrete Mixtures. Telecommunications towers and other infrastructure can rely on properly constructed foundations, making this an important area of trade knowledge.

Steel Erection and Welding preparation should combine Modern Welding with OSHA. Review welding processes, equipment, fabrication, structural assembly, and safety practices. Candidates should understand how welding knowledge connects with the installation of structural supports and telecommunications infrastructure.

For MATV and Cable TV Systems, use Data, Voice, and Video Cabling to review cabling types, installation practices, system components, testing concepts, and communications infrastructure. The same reference can also support broader preparation for underground and structured cabling topics.

Antenna preparation should include regular use of Antenna Toolkit. Candidates should understand basic antenna concepts and become familiar with the terminology and technical information used in telecommunications systems.

Hoisting should be studied using Handbook of Rigging. Telecommunications projects may involve lifting structural members, antennas, equipment, and other components, so candidates should become familiar with rigging equipment and safe load-handling practices.

Use Pipe and Excavation Contracting for underground cabling and sitework. Review trenching, excavation practices, soil conditions, equipment, grading, and installation methods. Combine this material with Alabama 1Call when studying safe excavation around existing underground facilities.

Storm Water Management for Construction Activities supports the Erosion and Sedimentation Control section. OSHA should be incorporated throughout study because Safety represents 6 questions and can overlap with excavation, steel erection, welding, rigging, and other construction activities.

Practice timed reference navigation as part of preparation. Identify the subject first, select the most appropriate reference, locate the supporting information, and review the surrounding material. This approach can strengthen both technical understanding and open-book exam efficiency.

How 1 Exam Prep Helps You Reach Your Goal

1 Exam Prep supports Alabama Telecommunication Projects Contractor candidates through organized study guidance, telecommunications-focused review, practice-oriented preparation, reference navigation, and confidence-building study structure.

The examination combines communications technology with construction disciplines such as concrete, steel, welding, rigging, excavation, environmental controls, and safety. Organizing preparation around the published content categories helps candidates approach this broad material in a structured way.

1 Exam Prep encourages candidates to work directly with the applicable references. Candidates can practice recognizing whether a question belongs in Data, Voice, and Video Cabling, Antenna Toolkit, OSHA, Modern Welding, Handbook of Rigging, Pipe and Excavation Contracting, or another exam reference before beginning a lookup.

Practice-oriented preparation can also identify weaker areas. A telecommunications technician with strong cabling experience may need additional review of concrete foundations, rigging, or welding, while a construction contractor may need more focused preparation involving antennas, MATV, or cable TV systems.

Reference navigation is especially valuable on an open-book exam. Candidates who understand which book covers a subject and how that book is organized can use the available testing time more effectively.

The Alabama Telecommunication Projects Contractor Exam Book Package provides a comprehensive technical reference library for candidates preparing to strengthen their knowledge of telecommunications infrastructure while working toward the applicable Alabama contractor classification.

How many questions are on the Alabama Telecommunication Projects Contractor exam?

The examination contains 45 questions. Candidates are allowed 120 minutes to complete the test.

What score is required to pass?

The minimum passing score is 70%, which equals 32 correct answers out of 45 questions.

Is the Alabama Telecommunication Projects Contractor exam open book?

Yes. The examination is open book and permits approved reference materials under PSI's testing rules.

What subjects are covered on the exam?

The examination covers MATV and Cable TV Systems, Antennas, Foundations and Concrete, Steel Erection and Welding, Safety, Erosion and Sedimentation Control, One Call, Underground Cabling, Hoisting, and Sitework.

What are the largest exam sections?

Foundations and Concrete and Steel Erection and Welding are the largest sections with 8 questions each. MATV and Cable TV Systems and Antennas contain 7 questions each.

Does the package include a telecommunications cabling reference?

Yes. Data, Voice, and Video Cabling is included for preparation involving structured cabling and communication systems.

Does the package include an antenna reference?

Yes. Antenna Toolkit, 2nd Edition, 2001 is included for antenna-related exam preparation.

Does the package include OSHA?

Yes. Code of Federal Regulations - 29 CFR Part 1926 is included for construction-safety preparation.

Does the package include Alabama 1Call?

Yes. Alabama 1Call – Dig Safely; AL Act 94-487 S.299 is included for underground utility notification preparation.

Can the approved exam books be highlighted and tabbed?

Yes. PSI permits approved references to be highlighted, underlined, indexed, and fitted with permanent tabs. Temporary tabs are not permitted.

Who administers the Alabama Telecommunication Projects Contractor exam?

PSI administers the trade examination as part of the licensing process overseen by the Alabama Licensing Board for General Contractors.

Is Telecommunication Projects an Alabama contractor classification?

Yes. Telecommunication Projects is recognized as a specialty within Alabama's Municipal & Utility contractor classification structure.