Prepare for the Georgia Conditioned Air Contractor Class I (Restricted) examination with ACE, the Free Demo Personal AI Tutor from 1 Exam Prep. Explore residential heating and cooling systems, HVAC load calculations, duct design, refrigeration, heat pumps, gas furnaces, mechanical codes, electrical controls, and contractor business practices through personalized AI-supported learning.
Georgia Class I Conditioned Air Contractors specialize in residential and light commercial heating, ventilation, and air conditioning systems within the equipment-capacity limits established by the state. Their work requires practical knowledge of equipment selection, installation, maintenance, troubleshooting, and applicable construction codes.
The Georgia Conditioned Air Contractor Class I (Restricted) Exam Prep Free Demo Personal AI Tutor introduces organized examination preparation through technical explanations, focused subject review, and interactive learning with ACE.
Whether you are an experienced HVAC technician, residential installer, service professional, lead mechanic, or aspiring HVAC business owner, ACE helps you explore the technical knowledge associated with Georgia Class I licensing.
Build familiarity with ACCA Manual J and Manual D, strengthen your understanding of refrigeration principles, review mechanical and fuel gas requirements, and develop better reference-navigation habits.
Explore ACE: Meet Your Personal AI Exam Coach.
The Georgia Class I Conditioned Air Contractor examination is administered by PSI Services for the Georgia Construction Industry Licensing Board, Division of Conditioned Air Contractors.
The examination evaluates HVAC system design, equipment installation, maintenance, repair, safety, and contractor business responsibilities.
System design represents the largest examination category. Candidates should develop a strong understanding of load calculations, equipment selection, airflow, duct systems, and residential HVAC design principles.
The Georgia Conditioned Air Contractor Class I examination is an open book test. Candidates may consult the technical and business publications designated on the approved examination reference list.
Approved materials address mechanical systems, fuel gas installations, electrical requirements, residential load calculations, duct design, refrigeration, construction safety, and contractor management.
Candidates may bring as many or as few of the designated references as desired. Only publications and calculation aids appearing on the approved list are permitted.
Reference books may be highlighted, underlined, and indexed with permanent tabs. Unauthorized photocopied materials, handwritten notes, and inserted papers are prohibited.
For examinations administered beginning May 1, 2026, the tested mechanical and fuel gas codes are the 2024 Georgia Mechanical Code and 2024 Georgia Gas Code, each with Georgia amendments.
A silent, nonprogrammable calculator without alphabetic keys or printing capabilities is permitted during testing.
Practice using code indexes, load calculation tables, duct sizing references, and refrigeration diagrams. Knowing where information appears is an important part of managing a lengthy open-book examination.
ACE helps candidates explore technical concepts and develop reference-navigation habits before examination day. The AI tutor itself is not an approved examination-room resource.
Obtaining a Georgia Class I Conditioned Air Contractor license involves satisfying the experience, education, examination, and application requirements established by the Georgia Construction Industry Licensing Board.
The Georgia Construction Industry Licensing Board, Division of Conditioned Air Contractors regulates Class I and Class II conditioned air contractor licensing.
Georgia Class I licensing covers residential and light commercial conditioned air work involving equipment within the following limits:
Each complete system in a single installation is considered individually when applying the classification limits.
Class I applicants must establish four years of qualifying conditioned air experience, including:
Georgia also provides qualifying experience credit for certain approved technical education.
Applicants must submit three professional references from individuals qualified under the Board's rules, such as licensed conditioned air contractors, architects, professional engineers, or inspectors.
Class I authority includes qualifying installation, service, maintenance, and repair of heating and cooling equipment, ductwork, refrigerant lines, gas piping, controls, and associated components within the classification limits.
The Class II classification provides broader authority without the Class I heating and cooling equipment-capacity restrictions.
The Georgia Class I examination uses designated references for HVAC system design, installation, technical calculations, safety, and contractor responsibilities.
The following references and designated calculation aids are approved for the Georgia Class I examination:
The Low Pressure Boilers reference designated for the Class II examination is not an approved Class I examination reference.
The Georgia Conditioned Air Contractor examination includes four major scored content categories:
System design accounts for 55% of the scored examination questions. A productive study plan should dedicate substantial attention to heating and cooling loads, airflow, equipment selection, and duct sizing.
Load calculations determine the heating and cooling capacity needed for a building.
Study heat gain, heat loss, insulation, windows, building orientation, and indoor design conditions.
Practice using ACCA Manual J to understand residential equipment sizing. Review calculation terminology and the importance of selecting equipment according to the building's requirements.
Proper duct design supports system performance, comfort, and efficiency.
Study supply and return airflow, duct dimensions, friction loss, static pressure, and register placement.
Review ACCA Manual D, flexible duct installation standards, and approved duct sizing calculation aids.
Practice recognizing the relationship between equipment airflow and duct system design.
Refrigeration knowledge is essential for HVAC installation and service.
Study compressors, condensers, evaporators, metering devices, refrigerant flow, and heat transfer.
Review pressure-temperature relationships, superheat, subcooling, and basic diagnostic principles.
Develop familiarity with the operation of residential cooling systems.
Heat pumps provide heating and cooling through the refrigeration cycle.
Study reversing valves, defrost operation, auxiliary heat, airflow, and system controls.
Review gas furnace components, combustion principles, and heating equipment installation.
Practice identifying equipment characteristics and relevant code requirements.
Gas heating equipment requires appropriate fuel piping, combustion air, and venting.
Study gas pipe sizing, appliance connections, venting methods, clearances, and safety requirements.
Practice navigating the 2024 Georgia Gas Code and its amendments.
Georgia's mechanical code governs important aspects of HVAC installation.
Study equipment placement, ventilation, duct installation, condensate disposal, and mechanical system requirements.
Review the organization of the 2024 Georgia Mechanical Code and learn to identify relevant provisions efficiently.
HVAC equipment relies on motors, relays, contactors, thermostats, and electrical protection.
Study basic electrical theory, control circuits, equipment nameplate information, and disconnecting means.
Review electrical safety and National Electrical Code provisions relevant to conditioned air equipment.
Correct installation supports reliable HVAC operation.
Study equipment placement, refrigerant piping, duct connections, condensate drainage, and startup procedures.
Review the importance of verifying airflow, electrical connections, and system operation after installation.
Maintenance and repair questions assess practical understanding of system operation.
Study airflow problems, refrigeration faults, electrical control issues, and equipment performance.
Review safe diagnostic procedures and the relationship between system symptoms and potential causes.
Class I contractors must understand responsibilities beyond technical HVAC work.
Study construction contracts, estimating, project scheduling, insurance, business administration, and regulatory compliance.
Review safety requirements and the importance of working within the Class I equipment-capacity limitations.
Effective preparation combines technical study, practical examples, calculation practice, and reference navigation.
Prioritize system design, followed by installation, maintenance, repair, and business administration.
Practice using Manual J and Manual D, interpreting code tables, and selecting the appropriate reference for technical questions.
Maintain a consistent study routine and revisit subjects that require additional attention.
1 Exam Prep supports HVAC professionals preparing for contractor licensing examinations through organized study guidance, trade-focused technical review, and practice-oriented learning.
With ACE, candidates can explore AI-supported explanations involving residential heating and cooling, load calculations, duct design, refrigeration, electrical controls, and Georgia mechanical code requirements.
The Georgia Conditioned Air Contractor Class I (Restricted) Exam Prep Free Demo Personal AI Tutor introduces an interactive approach to understanding the subjects associated with Georgia's restricted conditioned air contractor examination.
ACE encourages students to revisit challenging topics, practice technical reasoning, and develop confidence through structured preparation.
For this open-book examination, familiarity with designated references is especially valuable. ACE supports organized learning and reference-navigation practice without promising a particular examination outcome.
Whether you are an HVAC service technician, residential installer, lead mechanic, or aspiring contractor, the free demo introduces focused study support from 1 Exam Prep.
Explore Georgia Class I Conditioned Air Contractor preparation with ACE by 1 Exam Prep. Visit the ACE Personal AI Exam Coach page to explore the free demo.
It is a free demonstration of ACE, the personal AI exam coach from 1 Exam Prep, introducing study guidance for Georgia's Class I Restricted Conditioned Air Contractor examination.
Yes. Candidates may consult the designated reference publications and permitted calculation aids during the examination.
The examination includes 100 scored questions and 20 unscored pretest questions.
Candidates have seven hours, divided into two 3.5-hour parts.
The examination requires a minimum final scaled score of 70.
Class I is restricted to qualifying systems not exceeding 175,000 BTU of heating and 60,000 BTU of cooling. Class II does not have those equipment-capacity restrictions.
Four years of qualifying experience are required, including residential lead-mechanic installation, service technician, and residential supervisory experience.
Yes. Applicants must meet the applicable EPA technician certification requirement.
Yes. Residential load calculations and duct design are important system-design subjects, and both manuals are approved examination references.
The examination uses the 2024 Georgia Mechanical Code with Georgia amendments for examinations administered beginning May 1, 2026.
The Low Pressure Boilers reference is designated for Class II rather than Class I. Class I preparation emphasizes residential and qualifying light commercial conditioned air systems.
No. Applicants must complete the Georgia Board's licensing and qualification requirements.
ACE introduces technical explanations and organized review covering residential HVAC design, refrigeration, equipment installation, mechanical codes, and contractor responsibilities.
No. The Georgia Construction Industry Licensing Board regulates licensing. ACE provides educational examination preparation support.
Visit the ACE Personal AI Exam Coach page to explore Georgia Class I Conditioned Air Contractor examination preparation.
Take the next step toward focused Georgia Conditioned Air Contractor Class I (Restricted) exam preparation. Explore the free ACE AI tutor demo and strengthen your understanding of residential HVAC systems, heating and cooling loads, duct design, refrigeration, Georgia mechanical codes, and contractor responsibilities with 1 Exam Prep.