Mississippi Roofing Sheet Metal and Siding Contractor Exam Book Package

Prepare for the Mississippi Roofing, Sheet Metal and Siding contractor examination with a complete collection of technical reference books covering the primary roofing, siding, sheet metal, safety, estimating, carpentry, and building-code subjects connected to the trade exam. This package brings eight important references together in one convenient order for candidates pursuing this Mississippi contractor classification.

The Mississippi Roofing Sheet Metal and Siding Contractor Exam Book Package supports preparation for a broad specialty classification. Candidates must be ready to review multiple roofing systems, roof substrates, repair methods, siding installation, soffit work, flashing, sheet metal components, construction safety, estimating, carpentry, and applicable building-code provisions.

The included NRCA manuals address steep-slope roofing, metal panel systems, spray polyurethane foam roofing, and membrane roofing systems. Additional references cover OSHA construction standards, rigid PVC siding and soffit installation, roofing construction and estimating, general carpentry and building construction, and the 2021 International Building Code.

This is a standard book package. The books are not described as highlighted, tabbed, or rented, and online course access is not included. Candidates who need prepared references, an exam-preparation course, licensing application assistance, or a rental option should select the separately listed package that includes those features.

The Mississippi State Board of Contractors classifies Roofing, Sheet Metal and Siding as a tested specialty classification. Its scope includes installation, maintenance, repair, and alteration involving roofing, sheet metal, and siding. The roofing portion includes waterproofing, coating, leak correction, roof protection, and work intended to extend the life of a roof. The classification also covers specified sheet metal and siding activities.

A complete reference set gives candidates the materials needed to build an organized study plan. Each book serves a different purpose, so students should become familiar with the table of contents, index, chapter structure, terminology, diagrams, standards, and technical information found in every reference.

Exam Details

The Mississippi Roofing, Sheet Metal and Siding examination is administered by PSI after the Mississippi State Board of Contractors approves the candidate’s eligibility. Applicants must submit the appropriate contractor licensing application before scheduling the examination.

The trade examination contains 60 questions. Candidates receive 2 hours to complete the test and must earn a minimum score of 70 percent to pass.

The examination covers several technical knowledge areas:

• Safety: Construction safety standards, fall protection, ladders, scaffolds, personal protective equipment, tools, material handling, and jobsite hazards.
• Roofing Substrates: Roof decks, sheathing, substrate preparation, attachment methods, surface conditions, and installation considerations.
• Steep-Slope Roofing: Roof coverings, underlayments, flashing, valleys, penetrations, drainage, materials, and installation practices.
• Roofing Repairs: Inspection, maintenance, leak correction, damaged materials, repair procedures, and replacement considerations.
• Elastomeric Roofing: Membrane materials, substrates, insulation, flashing, attachment, installation, maintenance, and repair.
• Built-Up Bituminous Roofing: Built-up roofing materials, application methods, surfacing, flashing, drainage, maintenance, and repair.
• Siding Knowledge: Siding materials, wall preparation, fastening, clearances, expansion, soffits, fascia, accessories, and installation practices.
• Sheet Metal and Flashing: Flashings, gutters, leaders, downspouts, pans, fabrication concepts, drainage, and weather protection.

The examination may contain questions developed from the listed references as well as questions based on accepted industry practices and practical trade knowledge. Candidates should understand the underlying roofing and exterior-construction concepts instead of relying entirely on searching for answers during the exam.

The Mississippi State Board of Contractors determines all examinations assigned to an applicant. A separate Mississippi Law and Business Management examination may also be required as part of the licensing process. The Mississippi business and law reference is not included in this trade book package.

Open Book Test

The Mississippi Roofing, Sheet Metal and Siding examination is an open-book test. Candidates may bring the authorized references into the testing center, subject to the current PSI reference-material and examination-room rules.

Open-book testing gives candidates access to technical information, but it does not remove the need for preparation. Sixty questions must be completed within two hours, leaving an average of approximately two minutes for each question. Candidates who attempt to research every answer from the beginning may have difficulty completing the examination.

A more effective approach is to learn the major concepts and use the books to confirm technical details, code provisions, standards, or unfamiliar information. Candidates should know which reference applies to each roofing system and supporting subject before test day.

Questions about steep-slope roofing may direct candidates to the corresponding NRCA manual. Questions involving metal panels or spray polyurethane foam may require a different NRCA reference. Membrane and built-up roofing subjects are addressed in the membrane systems manual, while safety questions may require 29 CFR Part 1926.

Siding and soffit questions may involve the ASTM installation standard or the carpentry reference. Questions involving roofing calculations, materials, terminology, or estimating may require Roofing Construction and Estimating. Broader code questions may be found in the International Building Code.

Candidates should review PSI’s current rules before modifying any book. Approved references may be subject to inspection at the testing center. Unauthorized loose papers, removable notes, or inserted materials may not be allowed. Students should prepare and use their books in accordance with the current Candidate Information Bulletin.

Licensing Steps

1. Review the classification scope. Confirm that Roofing, Sheet Metal and Siding matches the work the applicant or business plans to perform.
2. Select the appropriate application. Complete the Mississippi commercial or residential contractor application that applies to the intended projects and licensing situation.
3. Identify the qualifying party. Designate the individual who will take the required contractor examinations on behalf of the applicant.
4. Prepare the required documentation. Gather the business, ownership, qualifying-party, insurance, experience, and supporting information requested by the Mississippi State Board of Contractors.
5. Submit the application. Send the completed application and required materials to the Board for review.
6. Address missing requirements. Provide additional documents, corrections, or information requested during the application review.
7. Receive testing eligibility. The Board determines which examinations are required and notifies PSI when the qualifying party is eligible to test.
8. Receive PSI confirmation. Candidates must wait for the testing confirmation before attempting to schedule an examination.
9. Study the examination references. Use the books in this package to review roofing systems, safety, siding, sheet metal, estimating, carpentry, and building-code subjects.
10. Schedule and take the examinations. Follow the current PSI registration, identification, testing-center, calculator, and reference-material procedures.
11. Complete the remaining licensing requirements. Passing the assigned examinations is one part of the process. The Board must approve the complete application before issuing a contractor license.

State Requirements

The Mississippi State Board of Contractors regulates commercial and residential contractors and roofers. Roofing, Sheet Metal and Siding is identified as a tested specialty classification involving installation, maintenance, repair, and alteration.

The roofing scope includes waterproofing and coating intended to protect, repair, waterproof, stop leaks, or extend the useful life of a roof. It also includes required roof-deck attachments and repair or replacement of wood roof sheathing or fascia when needed during roof repair or replacement.

The sheet metal portion includes fabrication, erection, installation, alteration, or repair of items such as cornices, flashings, gutters, leaders, rainwater downspouts, and pans. These components are commonly used to protect buildings from moisture and direct water away from roofing and exterior wall systems.

The siding portion includes fabrication and installation involving aluminum, vinyl, or other siding materials. It also includes related fascia, soffit, gutter, and exterior-component work within the scope established by the Board.

Applicants must submit an application before testing. The Mississippi State Board of Contractors reviews the applicant’s classification request and supporting information, then determines the examinations that must be completed. PSI administers the tests after receiving the applicant’s eligibility information from the Board.

The qualifying party is responsible for completing the examinations assigned to the contractor applicant. The individual must have the required relationship with the applicant and may need to provide documentation of ownership, officer status, or employment.

Applicants must satisfy all applicable licensing requirements in addition to passing the examination. These requirements may involve business documents, qualifying-party information, experience, insurance, and other supporting materials identified in the applicable application.

Passing the trade examination does not automatically issue a license. The Mississippi State Board of Contractors retains authority over classification approval, application review, qualification, and license issuance.

Reference Books

• NRCA Roofing Manual: Steep Slope Roof Systems
  This roofing-industry manual addresses steep-slope roof assemblies and recognized installation practices. It supports study of roof coverings, underlayments, roof decks, flashing, valleys, penetrations, drainage, materials, maintenance, and repair considerations.
• NRCA Roofing Manual: Metal Panel and SPF Roof Systems
  This manual covers metal panel roofing and spray polyurethane foam roof systems. Candidates can use it to review substrates, materials, system components, fastening, attachment, flashing, application, inspection, maintenance, and repair.
• NRCA Roofing Manual: Membrane Roofing Systems
  This technical reference addresses membrane roofing systems, including materials, substrates, insulation, attachment methods, flashing, surfacing, drainage, installation practices, maintenance, and repairs.
• Code of Federal Regulations - 29 CFR Part 1926 (OSHA)
  This federal construction-safety reference contains standards relevant to roofing, siding, and exterior construction. Topics include fall protection, ladders, scaffolds, personal protective equipment, tools, material handling, equipment, and hazard prevention.
• Standard Practice for Installation of Rigid Poly(Vinyl Chloride) (PVC) Siding and Soffit - ASTM D 4756
  This standard provides recognized practices for installing rigid PVC siding and soffit. It addresses surface preparation, fastening, clearances, expansion and contraction, joints, accessories, and installation details.
• Roofing Construction and Estimating, Daniel Atcheson, 1995
  This trade reference covers roofing construction methods and estimating fundamentals. It supports preparation involving measurements, material quantities, terminology, calculations, planning, installation procedures, and practical roofing knowledge.
• Carpentry and Building Construction, 2016
  This construction reference supports review of roof framing, substrates, sheathing, exterior walls, siding, soffits, fascia, tools, measurements, materials, and general carpentry practices.
• International Building Code, 2021
  This code contains requirements involving roof assemblies, exterior walls, weather protection, structural conditions, construction types, materials, and fire classifications that may affect roofing, siding, and sheet metal work.

The references work together to cover the examination’s varied technical scope. No single book contains all the information associated with the trade test. Candidates should understand the purpose of each title and become comfortable selecting the appropriate source based on the subject of a question.

Exam Room Approved Books

The technical reference set for the Mississippi Roofing, Sheet Metal and Siding trade examination includes:

• NRCA Roofing Manual: Steep Slope Roof Systems
• NRCA Roofing Manual: Metal Panel and SPF Roof Systems
• NRCA Roofing Manual: Membrane Roofing Systems
• Code of Federal Regulations - 29 CFR Part 1926 (OSHA)
• Standard Practice for Installation of Rigid Poly(Vinyl Chloride) (PVC) Siding and Soffit - ASTM D 4756
• Roofing Construction and Estimating, Daniel Atcheson, 1995
• Carpentry and Building Construction, 2016
• International Building Code, 2021

Candidates should use the editions identified for their examination and compare their books with the current PSI Candidate Information Bulletin before test day. Changes in editions may affect section numbers, page locations, terminology, tables, diagrams, and technical requirements.

Bring only the references authorized for the specific examination. The Mississippi business and law guide is associated with the separate Law and Business Management exam and is not included in this trade book package.

Test Information and Study Materials

Begin preparation by reviewing each book’s table of contents and index. Learn where the major subjects are located before attempting timed practice. This initial review helps build a mental map of the reference set.

Study the three NRCA manuals by roofing-system type. Compare steep-slope, metal panel, spray polyurethane foam, membrane, elastomeric, and built-up roof systems. Pay attention to differences in substrates, materials, attachment, flashing, drainage, installation, maintenance, and repair.

Use the ASTM siding standard and Carpentry and Building Construction to review siding, soffit, fascia, wall preparation, framing, sheathing, fastening, expansion, clearances, exterior finishing, and related construction practices.

Use Roofing Construction and Estimating to practice measurements, material calculations, terminology, project planning, and estimating. Understanding the calculation process is more useful than memorizing answers to isolated examples.

Use 29 CFR Part 1926 to review construction safety topics. Connect the standards to practical roofing and siding operations involving fall exposure, ladders, scaffolds, equipment, tools, personal protective equipment, and material handling.

Use the International Building Code to review roof assemblies, exterior walls, weather protection, structural requirements, materials, construction types, and fire-related provisions. Practice following cross-references and locating definitions that affect the interpretation of a code section.

Complete practice questions under timed conditions. Before searching, determine the subject area and select the most likely reference. This habit can reduce unnecessary page turning and improve time management.

Review every missed question. Identify whether the problem came from limited trade knowledge, selecting the wrong book, overlooking an exception, misreading a table, misunderstanding terminology, or spending too much time searching.

How 1 Exam Prep Helps You Reach Your Goal

1 Exam Prep supports Mississippi Roofing, Sheet Metal and Siding candidates through organized study guidance, trade-focused review, practice-oriented preparation, and reference-navigation strategies. A complete book package provides the technical foundation needed to study the broad range of systems and subjects associated with the examination.

Organized preparation helps candidates divide the material into manageable categories instead of attempting to read eight technical books without a plan. Students can focus separately on steep-slope roofing, membrane systems, metal panels, spray polyurethane foam, siding, safety, estimating, carpentry, and building codes.

Practice-oriented study encourages candidates to apply technical information instead of relying on passive reading. Working through questions helps identify weak areas and improves the ability to recognize which reference applies to a specific subject.

Reference-navigation practice is especially important for an open-book examination. Candidates should become comfortable using indexes, tables of contents, definitions, headings, diagrams, and code sections while managing limited examination time.

This package does not guarantee a passing score, examination eligibility, or contractor license. Results depend on the candidate’s preparation, trade knowledge, application status, and examination performance. The books provide an essential reference foundation for candidates building a structured study plan.

FAQ Section

What is included in this exam book package?

The package includes eight technical references covering roofing systems, OSHA safety, PVC siding and soffit installation, roofing construction and estimating, carpentry, and building-code requirements.

Is the Mississippi Roofing, Sheet Metal and Siding exam open book?

Yes. Candidates may bring the authorized references into the testing center, subject to PSI’s current examination rules.

How many questions are on the trade exam?

The examination contains 60 questions. Candidates receive two hours and must earn a minimum score of 70 percent.

Are these books highlighted and tabbed?

No. Highlighting and permanent tabs are not listed as part of this standard book package.

Does this package include an online course?

No. This listing includes the technical examination books only. Online course access is available through separately listed products.

Does this package include the Mississippi business and law book?

No. The NASCLA Mississippi business and law reference is not included in this trade exam book package.

Are these rental books?

No rental period or refundable deposit is included with this listing. This product is presented as a standard exam book package.

Do I need approval before scheduling the examination?

Yes. The Mississippi State Board of Contractors must establish the applicant’s testing eligibility before PSI permits scheduling.

What work is covered by this contractor classification?

The classification covers qualifying roofing, sheet metal, siding, fascia, soffit, gutter, flashing, waterproofing, maintenance, repair, and alteration work within the scope established by the Mississippi State Board of Contractors.

Does purchasing the books guarantee that I will pass?

No. The books provide the technical references used for preparation, but examination results depend on the candidate’s knowledge, study effort, navigation skills, time management, and performance.