Nevada Commercial Remodeling Contractor (B-6) Exam Book Package

Prepare for the Nevada Commercial Remodeling Contractor (B-6) trade examination with a comprehensive book package built around commercial remodeling, interior improvements, building-code requirements, concrete, masonry, carpentry, drywall, finishes, tile, safety, plan reading, and estimating. This package combines the references permitted for use during the trade examination with additional technical study books that help candidates develop the knowledge needed for the full B-6 exam.

The Nevada B-6 Commercial Remodeling classification focuses on remodeling and improving interior spaces in structures that support, shelter, or enclose persons, animals, or other property. The classification can apply to interior spaces in structures exceeding three stories and to certain lower buildings connected to structures exceeding three stories. The B-6 scope does not authorize the contractor to install, remove, or modify structural members, mechanical systems, fire protection systems, or other life-safety systems. :contentReference[oaicite:0]{index=0}

The exam-room-approved references included in this package are the International Building Code, 2012, ACI 318-14: Building Code Requirements for Structural Concrete and Commentary, and ACI 530/530.1-13: Building Code Requirements and Specification for Masonry Structures and Companion Commentaries.

The package also includes study references covering OSHA safety, gypsum construction, masonry, ceramic tile installation, floor construction, concrete quality, and related remodeling subjects. These additional books are intended for preparation before test day and are not allowed into the B-6 trade examination.

A productive B-6 study strategy combines technical knowledge with efficient use of the approved code references. Candidates should understand remodeling systems and materials well enough to recognize the subject of a question quickly, then use the appropriate exam-room reference when a specific code provision needs to be located.

Exam Details

The Nevada B-6 Commercial Remodeling Contractor examination is administered through PSI for applicants who have received examination eligibility through the Nevada State Contractors Board. Nevada uses PSI for contractor licensing examinations, and candidates receive authorization before scheduling the required examination. :contentReference[oaicite:1]{index=1}

• Exam: Nevada B-6 Commercial Remodeling Contractor
• Testing Provider: PSI
• Number of Questions: 80
• Time Allowed: 3 hours
• Minimum Passing Score: 56 correct answers

The current examination content is organized into the following subject areas:

• Concrete: 4 questions
• Masonry: 4 questions
• Metals: 3 questions
• Carpentry: 7 questions
• Thermal and Moisture Protection: 10 questions
• Doors and Windows: 5 questions
• Drywall and Finishes: 17 questions
• Tile: 10 questions
• Safety: 10 questions
• Plan Reading and Estimating: 10 questions

Drywall and Finishes is the largest individual examination category with 17 questions. Candidates should review gypsum board systems, interior finishes, installation practices, finishing methods, assemblies, materials, and related commercial remodeling concepts.

Thermal and Moisture Protection, Tile, Safety, and Plan Reading and Estimating each account for 10 questions. These four areas together make up a substantial portion of the examination and should receive significant attention during preparation.

Carpentry accounts for seven questions, while Doors and Windows accounts for five. Concrete and Masonry each contain four questions, and Metals contains three. Candidates should still review the smaller categories because every correct answer contributes toward the required passing score.

Open Book Test

The Nevada B-6 Commercial Remodeling trade examination is an open-book test with specific approved references permitted in the examination room. Nevada generally treats contractor trade examinations as closed book except for designated code references identified for the individual examination. :contentReference[oaicite:2]{index=2}

The exam-room-approved references included in this package are:

• International Building Code, 2012
• ACI 318-14: Building Code Requirements for Structural Concrete and Commentary
• ACI 530/530.1-13: Building Code Requirements and Specification for Masonry Structures and Companion Commentaries

The International Building Code, 2012 supports preparation involving commercial building requirements, occupancy and use, means of egress, fire-resistant construction, accessibility, interior finishes, materials, and other building-code topics that may arise during remodeling work.

ACI 318-14 supports concrete-related preparation involving structural concrete requirements, materials, reinforcement, construction provisions, and related concrete concepts.

ACI 530/530.1-13 supports masonry-related preparation involving masonry materials, construction, reinforcement, specifications, and structural masonry requirements.

The following books included in this package are not allowed into the B-6 trade examination:

• Code of Federal Regulations - 29 CFR Part 1926 (OSHA)
• Gypsum Construction Handbook, 7th edition
• Modern Masonry - Brick, Block, Stone, Clois E. Kicklighter, 10th edition
• ANSI A108/A118/A136.1:2017, American National Standard Specifications for the Installation of Ceramic Tile, 2017
• Builders Guide to Floors, 1997
• Setting Tile, 1995
• Handbook for Ceramic, Glass, and Stone Tile Installation, 2017
• The Contractor's Guide to Quality Concrete Construction - 4th Edition

These books should be used during preparation to develop technical knowledge that candidates can apply without having the references available during the examination.

Licensing Steps

The Nevada State Contractors Board regulates the B-6 Commercial Remodeling classification. Passing the B-6 trade examination is one part of the complete Nevada contractor licensing process.

1. Confirm the B-6 classification. Determine that Commercial Remodeling matches the work the business intends to perform.
2. Identify the qualifying individual. Designate the person who will satisfy the applicable experience and examination requirements.
3. Document qualifying experience. Prepare records describing relevant commercial remodeling work, responsibilities, projects, materials, trades, and supervision experience.
4. Prepare the Nevada contractor license application. Gather business information, qualifier information, experience documentation, financial information, and required supporting materials.
5. Submit the application to the Nevada State Contractors Board. The Board evaluates the application before examination eligibility is issued.
6. Complete applicable background requirements. Follow required disclosure, fingerprint, and background procedures.
7. Meet financial responsibility requirements. Provide the financial information applicable to the requested contractor license.
8. Receive examination eligibility. Candidates required to test can proceed with scheduling after authorization.
9. Schedule the B-6 examination through PSI. Arrange the Commercial Remodeling trade examination after receiving eligibility.
10. Prepare for the examination. Study drywall, finishes, tile, thermal and moisture protection, safety, plan reading, estimating, carpentry, concrete, masonry, metals, doors, and windows.
11. Complete applicable contractor management requirements. Nevada licensing also includes management qualification in addition to the trade examination.
12. Complete required examinations and remaining licensing requirements. Satisfy applicable testing, financial, bonding, background, and other Nevada State Contractors Board requirements.

State Requirements

The Nevada B-6 Commercial Remodeling subclassification authorizes remodeling and improvement of interior spaces in structures that support, shelter, or enclose persons, animals, or other property. This includes qualifying structures exceeding three stories in height and certain lower structures connected to taller buildings. :contentReference[oaicite:3]{index=3}

The B-6 classification has important limitations. It does not authorize the license holder to perform, manage, or supervise the installation, removal, or modification of structural members, mechanical systems, fire protection systems, or other life-safety systems. :contentReference[oaicite:4]{index=4}

These limitations make scope awareness important both for the examination and for licensed practice. Commercial remodeling can involve many interior building trades, but work that crosses into restricted structural, mechanical, fire protection, or life-safety activities requires the appropriate licensing and qualified trade involvement.

The Nevada State Contractors Board maintains B-6 as a recognized Commercial Remodeling subclassification within Nevada contractor licensing. :contentReference[oaicite:5]{index=5}

Applicants must also satisfy applicable Nevada requirements involving experience, examinations, financial responsibility, background review, and other licensing obligations. The Board reviews supporting experience information before determining examination eligibility. :contentReference[oaicite:6]{index=6}

Reference Books

• International Building Code, 2012
  Exam-room-approved reference supporting commercial building-code preparation involving occupancy, means of egress, fire protection features, interior construction, accessibility, materials, and other commercial remodeling requirements.
• ACI 318-14: Building Code Requirements for Structural Concrete and Commentary
  Exam-room-approved reference supporting concrete-related preparation involving materials, reinforcement, structural concrete requirements, construction provisions, and related concepts.
• ACI 530/530.1-13: Building Code Requirements and Specification for Masonry Structures and Companion Commentaries
  Exam-room-approved reference supporting masonry materials, reinforcement, installation, construction requirements, and masonry specifications.
• Code of Federal Regulations - 29 CFR Part 1926 (OSHA)
  Study reference supporting preparation for construction safety, fall protection, personal protective equipment, ladders, scaffolds, tools, material handling, and related jobsite hazards. This reference is not allowed into the B-6 trade examination.
• Gypsum Construction Handbook, 7th edition
  Study reference supporting gypsum board systems, drywall construction, interior assemblies, finishing methods, and related commercial interior work. This book is not allowed into the examination.
• Modern Masonry - Brick, Block, Stone, Clois E. Kicklighter, 10th edition
  Study reference covering masonry materials, methods, brick, block, stone, tools, layout, and construction practices. This book is not allowed into the examination.
• ANSI A108/A118/A136.1:2017, American National Standard Specifications for the Installation of Ceramic Tile, 2017
  Study reference supporting ceramic tile materials, installation specifications, setting systems, and industry requirements. This reference is not allowed into the examination.
• Builders Guide to Floors, 1997
  Study reference supporting floor systems, floor construction, preparation, layout, and related building concepts. This book is not allowed into the examination.
• Setting Tile, 1995
  Study reference covering tile layout, preparation, installation methods, setting techniques, and finishing practices. This book is not allowed into the examination.
• Handbook for Ceramic, Glass, and Stone Tile Installation, 2017
  Study reference supporting installation practices and systems for ceramic, glass, and stone tile. This reference is not allowed into the examination.
• The Contractor's Guide to Quality Concrete Construction - 4th Edition
  Study reference supporting quality concrete construction, materials, placement, finishing, curing, and practical field practices. This book is not allowed into the examination.

Exam Room Approved Books

• International Building Code, 2012
  Approved reference for use during the Nevada B-6 Commercial Remodeling trade examination.
• ACI 318-14: Building Code Requirements for Structural Concrete and Commentary
  Approved concrete reference for use during the Nevada B-6 examination.
• ACI 530/530.1-13: Building Code Requirements and Specification for Masonry Structures and Companion Commentaries
  Approved masonry reference for use during the Nevada B-6 examination.

Test Information and Study Materials

A strong B-6 preparation strategy should reflect the examination weighting. Drywall and Finishes is the largest individual section, while Thermal and Moisture Protection, Tile, Safety, and Plan Reading and Estimating each contain 10 questions.

Prioritize drywall and finishes. Review gypsum board systems, interior assemblies, installation, finishing techniques, materials, and common commercial interior construction practices.

Study tile installation. Review substrate preparation, materials, setting methods, layout, installation practices, and ceramic, glass, and stone tile systems.

Review thermal and moisture protection. Understand moisture control, waterproofing relationships, insulation concepts, sealants, and other protective systems relevant to interior remodeling.

Prepare for safety. Use OSHA during study to reinforce fall protection, personal protective equipment, ladders, scaffolds, tools, electrical hazards, material handling, and common commercial construction safety practices.

Practice plan reading and estimating. Candidates should be comfortable interpreting plans, dimensions, quantities, materials, and basic estimating information used in remodeling projects.

Review carpentry, doors, and windows. Study framing relationships, interior carpentry, openings, door and window installation concepts, hardware relationships, and finish work.

Study concrete and masonry. Practice navigating ACI 318-14 and ACI 530/530.1-13 while using the additional technical references to build practical understanding of concrete and masonry construction.

Practice building-code navigation. Become comfortable using the International Building Code, especially for occupancy, egress, interior construction, fire-resistance, accessibility, and other topics connected with commercial remodeling.

Use timed practice. Candidates have three hours to answer 80 questions. Efficient code navigation and disciplined pacing are important during a multi-reference examination.

How 1 Exam Prep Helps You Reach Your Goal

1 Exam Prep supports Nevada B-6 Commercial Remodeling Contractor candidates through organized study guidance, trade-focused review, practice-oriented preparation, reference navigation, and confidence-building study structure.

The B-6 examination spans many interior construction disciplines. Organized preparation helps candidates divide the material into focused subjects such as drywall, finishes, tile, moisture protection, safety, estimating, carpentry, concrete, masonry, metals, doors, and windows.

Reference-navigation practice focuses on the International Building Code, ACI 318-14, and ACI 530/530.1-13. Candidates can practice identifying which approved reference applies to a question and locating the relevant information without spending unnecessary time searching.

The additional study-only books provide practical depth in areas such as gypsum construction, masonry, tile installation, floor systems, concrete quality, and OSHA safety. These materials help reinforce the technical knowledge candidates should be prepared to apply without having the study books available during the trade examination.

Practice-oriented preparation also helps identify weaker areas. A candidate with extensive drywall experience may need more work with tile, masonry, code navigation, or estimating, while another may need additional preparation involving safety, concrete, carpentry, or moisture protection.

By combining approved exam-room references with a broad technical study package and structured preparation, 1 Exam Prep helps candidates build a focused approach to the Nevada B-6 Commercial Remodeling Contractor examination.

Frequently Asked Questions

What books are included in the Nevada B-6 Exam Book Package?

The package includes the International Building Code, 2012; ACI 318-14; ACI 530/530.1-13; OSHA 29 CFR Part 1926; Gypsum Construction Handbook; Modern Masonry; ceramic tile references; Builders Guide to Floors; Setting Tile; and The Contractor's Guide to Quality Concrete Construction.

Is the Nevada B-6 examination open book?

Yes. The B-6 trade exam allows the designated approved code references identified for the examination. :contentReference[oaicite:7]{index=7}

Which books are allowed into the B-6 examination?

The International Building Code, 2012; ACI 318-14; and ACI 530/530.1-13 are the approved exam-room references included in this package.

Which books in this package are study-only?

OSHA, Gypsum Construction Handbook, Modern Masonry, the listed tile references, Builders Guide to Floors, Setting Tile, and The Contractor's Guide to Quality Concrete Construction are study materials and are not allowed into the B-6 trade examination.

How many questions are on the Nevada B-6 examination?

The B-6 examination contains 80 questions.

How much time is allowed for the B-6 exam?

Candidates have three hours to complete the examination.

What score is required to pass?

The minimum passing score is 56 correct answers out of 80 questions.

What is the largest B-6 exam category?

Drywall and Finishes is the largest individual category with 17 questions.

What does the Nevada B-6 classification cover?

The B-6 classification covers remodeling and improvement of qualifying interior spaces in commercial and other structures, subject to important limitations involving structural members, mechanical systems, fire protection systems, and other life-safety systems. :contentReference[oaicite:8]{index=8}

Why are study-only books included?

The study-only references provide technical preparation in drywall, masonry, tile, concrete, flooring, safety, and related subjects that candidates should understand before test day.

Should I practice using all three exam-room references?

Yes. Candidates should become familiar with the International Building Code, ACI 318-14, and ACI 530/530.1-13 so they can identify and navigate the appropriate reference efficiently.

Does passing the B-6 exam automatically issue a Nevada contractor license?

No. Passing the trade examination is one part of the licensing process. Applicants must also satisfy applicable experience, management qualification, financial responsibility, background, bonding, and other Nevada State Contractors Board requirements. :contentReference[oaicite:9]{index=9}

Who is this package best for?

This package is designed for candidates preparing for the Nevada B-6 Commercial Remodeling Contractor examination who want both the approved exam-room references and the broader technical study materials used to prepare for commercial remodeling topics.