Nevada Roofing and Siding Contractor (C-15) Ultimate Exam Prep Rental

Prepare for the Nevada Roofing and Siding Contractor (C-15) examination and contractor licensing process with an Ultimate Exam Prep Rental package built around roofing systems, siding installation, building-code navigation, safety, estimating, construction methods, Nevada Business and Law preparation, and structured exam study.

This Ultimate package combines the complete listed reference set, 1 year of course access, Application Service, highlighted and tabbed books, roofing and siding trade review, practice-oriented preparation, and Nevada contractor Business and Law study in one organized solution.

The Nevada C-15 Roofing and Siding classification is regulated by the Nevada State Contractors Board. The full classification brings together roofing and siding work, so candidates should prepare for a broader range of exterior construction subjects than they would encounter in a roofing-only subclassification.

Preparation for the C-15 examination should include steep-slope roofing, membrane roofing, metal panel roof systems, spray polyurethane foam roofing, roof substrates, roof repairs, elastomeric systems, built-up roofing, flashing, siding installation, construction safety, roofing estimating, carpentry-related construction, building-code requirements, and rooftop photovoltaic considerations.

The approved exam-room reference included with this package is the International Building Code, 2018. The C-15 examination is open book with specific approved reference material, so candidates should develop practical familiarity with the organization of the IBC and practice locating roofing and exterior-building requirements efficiently.

The additional technical study references included with the Ultimate package are the NRCA Roofing Manual: Steep Slope Roof Systems, 2025; NRCA Roofing Manual: Metal Panel and SPF Roof Systems, 2024; NRCA Roofing Manual: Membrane Roofing Systems; Code of Federal Regulations - 29 CFR Part 1926 (OSHA); Standard Practice for Installation of Rigid Poly(Vinyl Chloride) (PVC) Siding and Soffit - ASTM D 4756; Roofing Construction and Estimating by Daniel Atcheson, 1995; Carpentry and Building Construction, 2016; and NRCA Guidelines for Roof Systems with Rooftop Photovoltaic Components, 2018.

These additional technical references support study and preparation but are not allowed into the C-15 trade examination. They should be used to build the roofing, siding, estimating, safety, and construction knowledge candidates need to recall on test day.

The Construction Business and Law Manual for Nevada is also included to support preparation for the Nevada Contractor Management Survey and Business and Law requirements.

All included books are highlighted and tabbed. The organized book set supports targeted study, faster review of important material, and repeated reference navigation throughout the preparation process.

Package Price: $1,960.

Refundable Deposit: $750.

Total Due Today: $2,710.

Please allow up to 15 business days for Ultimate book package orders.

Exam Details

The Nevada C-15 Roofing and Siding Contractor trade examination is administered through PSI for qualifying applicants pursuing licensure through the Nevada State Contractors Board.

• Exam: Nevada C-15 Roofing and Siding Contractor
• Number of Questions: 60
• Time Allowed: 2 hours
• Minimum Passing Score: 42 correct answers
• Testing Provider: PSI

The examination requires preparation across both roofing and siding work. Candidates should understand roofing substrates, steep roofing systems, roof repairs, membrane and low-slope systems, elastomeric roofing, built-up roofing, siding applications, sheet metal and flashing, safety, estimating, and relevant building-code requirements.

Steep-slope roofing should receive significant attention during preparation. Candidates should review shingles, tile, slate, wood shakes and shingles, roof decks, underlayments, fastening methods, flashing, valleys, ridges, penetrations, drainage, and installation practices.

Roofing substrates are also important. Study should cover roof decks, sheathing, substrate condition, deterioration, surface preparation, compatibility with roofing materials, and how supporting construction affects the finished roofing system.

Siding distinguishes the full C-15 classification from roofing-only preparation. Candidates should review exterior siding systems, weatherproofing principles, fastening, joints, soffits, installation considerations, and PVC siding practices.

Membrane, built-up, elastomeric, metal panel, and SPF roofing systems should be part of the study plan. Candidates should understand materials, installation methods, attachment, flashing, insulation, drainage, repairs, and common system details.

Sheet metal and flashing are essential to weather-resistant exterior construction. Review flashing at roof edges, walls, valleys, transitions, curbs, penetrations, and other vulnerable locations where water intrusion can occur.

Safety should also be studied carefully because roofing and siding work can involve fall hazards, ladders, scaffolds, elevated work, material handling, tools, and other construction-site risks.

Open Book Test

The Nevada C-15 Roofing and Siding Contractor examination is an open-book test. The approved exam-room reference included with this Ultimate package is:

• International Building Code, 2018

Candidates should use the IBC throughout preparation rather than waiting until the final days before testing. Practical navigation experience can make it easier to locate roofing, exterior-wall, weather-protection, material, and structural requirements under timed conditions.

An open-book exam still requires strong trade knowledge. With 60 questions and two hours available, candidates have an average of about two minutes per question. Effective preparation should combine direct knowledge with selective code lookups rather than relying on the book for every answer.

The following included study references are not allowed into the C-15 trade examination:

• NRCA Roofing Manual: Steep Slope Roof Systems, 2025
• NRCA Roofing Manual: Metal Panel and SPF Roof Systems, 2024
• NRCA Roofing Manual: Membrane Roofing Systems
• Code of Federal Regulations - 29 CFR Part 1926 (OSHA)
• Standard Practice for Installation of Rigid Poly(Vinyl Chloride) (PVC) Siding and Soffit - ASTM D 4756
• Roofing Construction and Estimating, Daniel Atcheson, 1995
• Carpentry and Building Construction, 2016
• NRCA Guidelines for Roof Systems with Rooftop Photovoltaic Components, 2018

Because these books cannot be taken into the trade examination, candidates should use them to develop knowledge that can be recalled without depending on the reference. The NRCA manuals support multiple roofing systems, ASTM D 4756 supports siding and soffit preparation, OSHA reinforces safety, and Roofing Construction and Estimating supports practical roofing measurements and estimating.

Carpentry and Building Construction supports study involving roof framing, decking, sheathing, and related construction principles. The photovoltaic guidelines help candidates review how rooftop photovoltaic components interact with roofing systems, penetrations, flashing, drainage, access, and roof performance.

Licensing Steps

The Nevada State Contractors Board regulates contractor licensing for the C-15 Roofing and Siding classification. Passing the trade exam is one part of the complete licensing process.

1. Confirm the C-15 classification. Determine that Roofing and Siding corresponds with the work the contracting business intends to perform.
2. Identify the Trade Qualified Individual. Designate the person who will establish the required experience and technical qualification.
3. Document qualifying experience. Prepare the required experience documentation showing relevant work in the classification.
4. Prepare the contractor license application. Organize business information, qualifier information, experience documentation, and supporting materials.
5. Submit the application to the Nevada State Contractors Board. Examination eligibility is established after the application and experience have been reviewed.
6. Complete applicable background requirements. Follow the required background and fingerprint procedures associated with Nevada contractor licensing.
7. Address financial responsibility. Nevada contractor applicants must satisfy applicable financial responsibility requirements.
8. Receive examination eligibility. Once authorized, the qualifying individual can proceed with required testing.
9. Schedule the C-15 trade examination through PSI. Arrange the Roofing and Siding Contractor examination after receiving eligibility.
10. Prepare for the trade exam. Study roofing systems, siding, substrates, repairs, flashing, safety, estimating, photovoltaic considerations, and IBC navigation.
11. Prepare for Nevada Business and Law. The included Construction Business and Law Manual for Nevada supports preparation for the applicable management examination.
12. Complete required examinations. Nevada generally requires the applicable trade and Business and Law examinations unless the qualifier meets applicable waiver requirements.
13. Complete final licensing requirements. Address applicable bonding, financial responsibility, and remaining Nevada State Contractors Board requirements.

Application Service is included with the Nevada C-15 Ultimate package to assist with organizing the contractor licensing application process alongside technical and Business and Law preparation.

State Requirements

Nevada contractor applicants must demonstrate that the business has a qualified individual with the experience and skills necessary for the classification being requested.

For the standard licensing pathway, the Trade Qualified Individual must have at least four full years of qualifying experience within the 15 years immediately preceding the filing of the contractor license application. Qualifying experience can include work as a journeyman, foreman, supervising employee, or contractor in the specific classification requested.

Applicants should prepare detailed documentation describing the roofing and siding work performed, responsibilities held, and time periods represented by that experience. The Nevada State Contractors Board reviews experience as part of the application and examination eligibility process.

Nevada also requires a management qualification. The person serving as the Management Qualified Individual must satisfy the applicable Business and Law examination requirement unless an authorized waiver applies.

Contractor licensing includes requirements beyond examination preparation. Financial responsibility is part of the licensing review, and Nevada contractor licenses require a contractor license bond. Background-related requirements and other application conditions may also apply.

The license belongs to the contracting business rather than to the qualifying individual personally. Nevada licenses may be issued to qualifying business structures including individuals, partnerships, corporations, limited liability companies, and joint ventures when applicable requirements are met.

Reference Books

• International Building Code, 2018
  Included Book: Highlighted and tabbed code reference supporting roofing assemblies, roof coverings, exterior construction, weather protection, materials, and related building-code requirements. This is the approved exam-room reference included with the package.
• NRCA Roofing Manual: Steep Slope Roof Systems, 2025
  Included Book: Highlighted and tabbed study reference supporting steep-slope roofing systems, shingles, tile, slate, wood roofing, underlayments, roof decks, materials, and installation practices. This book is not allowed into the C-15 trade examination.
• NRCA Roofing Manual: Metal Panel and SPF Roof Systems, 2024
  Included Book: Highlighted and tabbed study reference supporting metal panel roofing and spray polyurethane foam roofing systems. This book is not allowed into the C-15 trade examination.
• NRCA Roofing Manual: Membrane Roofing Systems
  Included Book: Highlighted and tabbed study reference supporting membrane and low-slope roof systems, materials, attachment, flashing, drainage, installation, and repair concepts. This book is not allowed into the C-15 trade examination.
• Code of Federal Regulations - 29 CFR Part 1926 (OSHA)
  Included Book: Highlighted and tabbed safety study reference supporting fall protection, ladders, scaffolds, PPE, tools, material handling, and other construction-site safety subjects. This book is not allowed into the C-15 trade examination.
• Standard Practice for Installation of Rigid Poly(Vinyl Chloride) (PVC) Siding and Soffit - ASTM D 4756
  Included Book: Highlighted and tabbed study reference supporting PVC siding and soffit installation principles, fastening, alignment, joints, and exterior weather-protection preparation. This reference is not allowed into the C-15 trade examination.
• Roofing Construction and Estimating, Daniel Atcheson, 1995
  Included Book: Highlighted and tabbed study reference supporting roofing construction, measurements, materials, quantities, estimating, and practical trade knowledge. This book is not allowed into the C-15 trade examination.
• Carpentry and Building Construction, 2016
  Included Book: Highlighted and tabbed study reference supporting roof framing, roof decks, sheathing, structural wood components, and related construction knowledge. This book is not allowed into the C-15 trade examination.
• NRCA Guidelines for Roof Systems with Rooftop Photovoltaic Components, 2018
  Included Book: Highlighted and tabbed study reference supporting roofing considerations involving rooftop photovoltaic components, penetrations, flashing, drainage, maintenance access, and roof-system performance. This book is not allowed into the C-15 trade examination.
• Construction Business and Law Manual for Nevada
  Included Book: Highlighted and tabbed business reference supporting Nevada Contractor Management Survey and Business and Law preparation.

All included books are highlighted and tabbed.

Please allow up to 15 business days for Ultimate book package orders.

Test Information and Study Materials

A strong Nevada C-15 study plan should balance roofing and siding preparation rather than concentrating exclusively on one area. Candidates pursuing the full classification need a working understanding of exterior weather protection across multiple systems.

Prioritize steep-slope roofing. Review shingles, tile, slate, wood shakes and shingles, underlayments, roof decks, fasteners, flashing, valleys, ridges, penetrations, and drainage.

Study siding systems. Review siding materials, fastening methods, joints, weather protection, soffits, alignment, exterior-wall conditions, and PVC siding installation principles.

Review membrane and low-slope roofing. Study membrane systems, built-up bituminous roofing, elastomeric systems, metal panels, SPF systems, insulation, attachment, drainage, flashing, and repairs.

Prepare safety concepts for recall. Since OSHA is not allowed into the C-15 trade exam, candidates should study fall protection, ladder safety, scaffolding, PPE, material handling, and tool safety before test day.

Practice IBC navigation. Work regularly with the International Building Code and practice finding roofing and exterior-building requirements within a limited amount of time.

Review estimating. Study roof measurements, materials, quantities, waste considerations, and practical roofing estimating concepts.

Study rooftop photovoltaic conditions. Review how photovoltaic components can affect roofing penetrations, flashing, drainage, maintenance access, and overall roof-system performance.

Use timed practice. With 60 questions in two hours, candidates should develop a consistent pace and become comfortable deciding when a code lookup is useful and when direct trade knowledge is the faster approach.

How 1 Exam Prep Helps You Reach Your Goal

1 Exam Prep supports Nevada C-15 Roofing and Siding Contractor candidates through organized study guidance, roofing and siding trade-focused review, practice-oriented preparation, reference navigation, Nevada Business and Law preparation, Application Service, and confidence-building study structure.

The highlighted and tabbed books create an organized reference library covering the International Building Code, steep-slope roofing, membrane roofing, metal panel and SPF systems, siding installation, construction safety, estimating, carpentry, rooftop photovoltaic considerations, and Nevada contractor Business and Law.

With 1 year of course access, candidates have an extended period to work through the material, revisit difficult subjects, and concentrate on areas that need more study. Someone with extensive roofing experience may need additional preparation in siding, while another candidate may need more practice with membrane systems, estimating, safety, or code navigation.

Practice-oriented study can help identify weak areas before exam day. Missed questions may reveal that additional review is needed in steep roofing, substrates, repairs, siding, membrane systems, flashing, estimating, or safety.

Reference-navigation preparation centers on the International Building Code because it is the approved exam-room reference included with this package. Repeated navigation can help candidates become more familiar with the structure of the code and more efficient when a precise requirement must be located.

The study-only books broaden technical preparation beyond the exam-room reference. The NRCA manuals support multiple roofing systems, ASTM D 4756 supports siding preparation, OSHA reinforces safety, Roofing Construction and Estimating supports measurements and estimating, and Carpentry and Building Construction supports framing and roof-deck knowledge.

The Construction Business and Law Manual for Nevada supports the management side of contractor licensing and complements technical C-15 preparation.

Application Service is included with this Ultimate package to help organize the Nevada contractor license application while the candidate works through exam preparation and other licensing requirements.

By combining highlighted and tabbed rental books, 1 year of course access, Application Service, roofing and siding trade review, building-code navigation, safety preparation, estimating study, photovoltaic roofing considerations, and Nevada Business and Law preparation, the Nevada C-15 Ultimate Exam Prep Rental provides a comprehensive study and licensing-support solution for professionals pursuing the Roofing and Siding Contractor classification.

Frequently Asked Questions

What is included in the Nevada C-15 Ultimate Exam Prep Rental?

The package includes all listed technical and business reference books, 1 year of course access, Application Service, highlighted and tabbed books, and structured preparation for the Nevada C-15 Roofing and Siding Contractor examination.

How much does the Nevada C-15 Ultimate package cost?

The package price is $1,960 plus a refundable $750 book deposit, for a total due today of $2,710.

Is the $750 book deposit refundable?

Yes. The $750 amount is identified as a refundable book deposit for this rental package.

Is the Nevada C-15 Roofing and Siding exam open book?

Yes. The Nevada C-15 Roofing and Siding Contractor examination is an open-book test with specific approved reference material.

Which book is allowed into the C-15 exam?

The approved exam-room reference included with this package is the International Building Code, 2018.

Which books are not allowed into the trade examination?

The listed NRCA roofing manuals, OSHA, ASTM D 4756, Roofing Construction and Estimating, Carpentry and Building Construction, and the NRCA photovoltaic roofing guidelines are study references and are not allowed into the C-15 trade examination.

How many questions are on the Nevada C-15 exam?

The Nevada C-15 Roofing and Siding Contractor examination contains 60 questions.

How much time is allowed for the examination?

Candidates have two hours to complete the C-15 trade examination.

What score is required to pass?

The minimum passing score is 42 correct answers out of 60 questions.

Does the Nevada C-15 exam include siding?

Yes. The C-15 classification covers Roofing and Siding, so candidates should prepare for siding knowledge as well as roofing systems.

Are all included books highlighted and tabbed?

Yes. All books included with the Ultimate package are highlighted and tabbed.

Is the Construction Business and Law Manual for Nevada included?

Yes. The Construction Business and Law Manual for Nevada is included to support Contractor Management Survey and Business and Law preparation.

Does the Ultimate package include 1 year of course access?

Yes. The package includes 1 year of course access.

Is Application Service included?

Yes. Application Service is included with the Nevada C-15 Ultimate Exam Prep Rental.

How much qualifying experience is required for the standard Nevada licensing pathway?

The Trade Qualified Individual must generally document at least four full years of qualifying experience within the 15 years immediately preceding the filing of the application.

Does passing the C-15 trade exam automatically issue a Nevada contractor license?

No. The trade examination is one part of the licensing process. Applicants must also satisfy applicable experience, management examination, financial responsibility, bonding, background, and other licensing requirements.

How long should I allow for the Ultimate book package order?

Please allow up to 15 business days for Ultimate book package orders.