Nevada Sign Contractor (C-6B) Books Allowed into Exam Package

Prepare for the Nevada Sign Contractor (C-6B) examination with a focused books-allowed-into-exam package built around the two references used for the open-book trade test: the NFPA 70 - National Electrical Code, 2017 and the Uniform Sign Code, 1997.

This package is intended for candidates who specifically want the exam-room-approved books for the Nevada C-6B Sign Contractor examination. It does not include the study-only references used for neon, sheet metal, or OSHA safety preparation.

The Nevada C-6B examination is an open-book test. Candidates can use the National Electrical Code and Uniform Sign Code during the trade examination, making familiarity with both books an important part of preparation.

The exam contains 50 questions, allows 2 hours for completion, and requires 35 correct answers to pass. The test covers the National Electrical Code, Uniform Sign Code, Neon, Sheet Metal, and Safety.

The Nevada C-6B Sign Contractor scope covers the fabrication, installation, and erection of electrical signs and the installation of related wiring. Candidates should be prepared for questions that combine practical sign-industry knowledge with electrical and sign-code requirements.

The National Electrical Code supports preparation for electrical sign wiring, grounding, bonding, circuits, protection, disconnecting means, and sign and outline lighting requirements. The Uniform Sign Code supports preparation involving sign construction, installation, supports, placement, and related sign requirements.

Because both references are allowed into the examination, effective preparation should include repeated navigation practice. Candidates should learn how each book is organized and become comfortable deciding which reference is most likely to contain the answer to a particular question.

What You Get

• NFPA 70 - National Electrical Code, 2017 — exam-room-approved reference supporting electrical sign wiring, grounding, bonding, branch circuits, overcurrent protection, disconnecting means, and sign-related electrical requirements.
• Uniform Sign Code, 1997 — exam-room-approved reference supporting sign construction, installation, placement, supports, structural relationships, and other sign-code requirements.

Exam Details

The Nevada C-6B Sign Contractor examination contains 50 questions. Candidates are allowed 2 hours to complete the examination and must answer 35 questions correctly to pass.

The examination is divided into the following subject areas:

• National Electrical Code: 13 questions
• Uniform Sign Code: 15 questions
• Neon: 10 questions
• Sheet Metal: 6 questions
• Safety: 6 questions

Uniform Sign Code is the largest individual examination category with 15 questions. Candidates should spend time learning how to locate sign construction, installation, structural, support, and placement requirements efficiently.

National Electrical Code accounts for 13 questions. Electrical sign contractors should be comfortable with sign and outline lighting provisions as well as general electrical requirements involving branch circuits, wiring methods, grounding and bonding, overcurrent protection, disconnecting means, conductors, and equipment.

Neon represents 10 questions, while Sheet Metal and Safety each represent 6 questions. These subjects must be prepared through retained trade knowledge because the books in this package are limited to the references allowed into the examination.

With 50 questions in two hours, candidates have a little more than two minutes per question on average. That makes targeted reference navigation an important skill.

Open Book Test

The Nevada C-6B Sign Contractor examination is an open-book test.

The books allowed into the trade examination and included in this package are:

• NFPA 70 - National Electrical Code, 2017
• Uniform Sign Code, 1997

Candidates should practice with both references throughout their study period. Open-book testing is most effective when the candidate already understands the structure of the books and can quickly determine where a particular requirement is likely to be located.

For questions involving electrical sign wiring, circuits, conductors, grounding, bonding, overcurrent protection, disconnecting means, or electrical equipment, the National Electrical Code should usually be the first reference considered.

For questions involving sign construction, placement, structural support, installation, maintenance, or other general sign-code provisions, the Uniform Sign Code should usually be the starting point.

Practice using the table of contents, index, definitions, tables, exceptions, and cross-references in both books. A question may use different wording than the section heading in the reference, so candidates should become comfortable searching by related terms.

The goal is not to look up every answer. Candidates should answer familiar trade questions efficiently and use the books for targeted confirmation when code language is important.

Licensing Steps

1. Confirm the C-6B classification. Make sure the Nevada Sign Contractor subclassification matches the electrical sign work the business intends to perform.
2. Identify the qualifying individual. The contractor application must identify the person responsible for satisfying the applicable qualification requirements.
3. Prepare qualifying experience information. Organize the work-history documentation required for the C-6B classification.
4. Submit the Nevada contractor license application. Complete the applicable application and supporting documentation.
5. Receive examination eligibility. After the applicable qualification and application requirements are addressed, proceed with required testing.
6. Prepare for the C-6B trade examination. Study electrical code, sign code, neon, sheet metal, and safety topics.
7. Practice reference navigation. Use the NEC 2017 and Uniform Sign Code 1997 regularly during preparation.
8. Prepare for Nevada contractor business requirements. Complete the applicable contractor business and law preparation required for Nevada licensing.
9. Complete the required examinations. Take the applicable trade and business examinations.
10. Complete remaining licensing requirements. Finish the other applicable requirements associated with contractor license issuance.

State Requirements

Nevada identifies C-6B as a specialty sign contractor subclassification focused on electrical sign work.

The scope includes the fabrication, installation, and erection of electrical signs and the installation of related wiring.

Candidates should understand both the physical construction of sign assemblies and the electrical systems used to power or illuminate them. This combination makes the C-6B examination broader than a purely electrical or purely fabrication-based test.

Electrical preparation should include sign wiring, branch circuits, grounding, bonding, overcurrent protection, disconnecting means, conductors, and other requirements that can apply to electrical signs and outline lighting.

Sign-code preparation should include installation, support, placement, structural relationships, and other requirements associated with complete sign assemblies.

Practical preparation should also include neon systems, sheet metal fabrication, and jobsite safety because those subjects appear on the examination even though the corresponding study books are not part of this books-allowed-into-exam package.

The C-6B trade examination is one part of Nevada contractor licensing. Applicants must also satisfy applicable qualification, application, financial, business, and other licensing requirements before a contractor license is issued.

Reference Books

• NFPA 70 - National Electrical Code, 2017
  This exam-room-approved reference supports preparation involving electric signs, outline lighting, branch circuits, wiring methods, grounding, bonding, overcurrent protection, disconnecting means, conductors, equipment, and other electrical requirements relevant to sign installation.
• Uniform Sign Code, 1997
  This exam-room-approved reference supports preparation involving sign construction, placement, support, installation, structural relationships, maintenance, and other sign-code requirements.

Exam Room Approved Books

• NFPA 70 - National Electrical Code, 2017
  This reference is allowed into the Nevada C-6B trade examination and supports open-book preparation for electrical sign wiring, circuits, grounding, bonding, disconnecting means, protection, and other electrical requirements.
• Uniform Sign Code, 1997
  This reference is allowed into the Nevada C-6B trade examination and supports open-book preparation involving sign construction, supports, placement, installation, structural conditions, and general sign-code requirements.

Test Information and Study Materials

A strong Nevada C-6B preparation plan should begin with the two books included in this package because they account for 28 of the 50 examination questions.

The Uniform Sign Code represents 15 questions and is the largest single category. Candidates should learn where to find requirements involving sign construction, installation, supports, location, structural relationships, and other sign-specific provisions.

The National Electrical Code represents 13 questions. Candidates should review sign and outline lighting requirements as well as general electrical provisions that can apply to electrical sign systems.

Do not limit NEC preparation to one sign-specific article. Sign installations may involve branch circuits, conductors, wiring methods, grounding, bonding, overcurrent protection, disconnects, and electrical equipment covered elsewhere in the code.

Electrical sign circuits should receive focused review. Candidates should understand how power reaches the sign, how conductors are protected, and how electrical equipment connects to the overall installation.

Grounding and bonding are also important because sign assemblies may include metal components and electrical equipment that must be properly integrated into the electrical system.

Disconnecting means should be included in study because electrical sign systems require a safe method of disconnecting power for service and maintenance.

Sign and outline lighting provisions should be reviewed carefully. Candidates should understand the relationship between specialized sign requirements and broader NEC rules.

For the Uniform Sign Code, begin by learning the organization of the book. Use the table of contents and index to locate sign types, construction requirements, support conditions, placement rules, and other relevant provisions.

Definitions matter in both books. A question may use terminology with a specific code meaning, and checking the definition can help determine which section applies.

Tables should be reviewed carefully. Important requirements may be contained in tables rather than repeated in paragraph text.

Exceptions can change how a general requirement applies. Candidates should read enough surrounding text to identify exceptions, limitations, or special conditions before selecting an answer.

Cross-references can lead to additional requirements in another article, section, or chapter. Practice following these references instead of assuming the first section contains the complete answer.

Timed navigation drills can help improve open-book performance. Select a topic and locate the applicable requirement in either the NEC or Uniform Sign Code under a set time limit.

A useful drill is to identify the correct book before opening either reference. Ask whether the question is primarily electrical or primarily related to sign construction and placement. This simple step can reduce unnecessary searching.

Because the exam includes 10 Neon questions, candidates should also develop retained knowledge of neon sign systems. Study neon tubing, transformers, electrodes, fabrication concepts, electrical relationships, installation practices, and common terminology.

The 6 Sheet Metal questions require practical knowledge of metal fabrication. Candidates should understand measurement, layout, cutting, bending, forming, joining, fastening, and common tools associated with sheet metal work.

The 6 Safety questions require retained knowledge of construction safety. Review electrical hazards, fall protection, ladders, scaffolds, personal protective equipment, power tools, material handling, and general jobsite safety practices.

Because this package contains only the exam-room-approved references, candidates should make sure their broader preparation covers neon, sheet metal, and safety through other study resources and trade experience.

A balanced study schedule can divide preparation into five areas matching the examination outline: National Electrical Code, Uniform Sign Code, Neon, Sheet Metal, and Safety.

Begin by studying each subject separately. This makes it easier to identify weak areas and build confidence before moving into mixed practice.

Once individual topics become familiar, use mixed practice questions that shift among electrical code, sign code, neon, fabrication, and safety.

When a practice question is missed, determine whether the problem was lack of trade knowledge, slow reference navigation, misunderstanding of a code term, or difficulty interpreting the question.

Correcting the underlying issue is more useful than memorizing a single answer. This builds stronger preparation for unfamiliar questions on test day.

Time management should be practiced regularly. With 50 questions in two hours, candidates should avoid spending too long on one difficult lookup while easier questions remain unanswered.

A practical approach is to answer familiar questions first, use the NEC or Uniform Sign Code for targeted confirmation when necessary, mark difficult items, and return to them after completing faster questions.

How 1 Exam Prep Helps You Reach Your Goal

1 Exam Prep supports Nevada C-6B Sign Contractor candidates through organized study guidance, trade-focused review, practice-oriented preparation, reference navigation, and confidence-building study structure.

This Books Allowed into Exam Package focuses on the NFPA 70 - National Electrical Code, 2017 and the Uniform Sign Code, 1997, giving candidates the core references used during the open-book trade examination.

Regular reference-navigation practice can help candidates become more comfortable deciding which book applies to a question and locating the appropriate article, section, definition, table, or exception efficiently.

Trade-focused preparation should still include neon systems, sheet metal fabrication, and safety because these subjects represent a significant portion of the examination even though their study-only references are not included in this package.

Practice-oriented review can help candidates identify whether missed questions result from weak electrical knowledge, unfamiliarity with the Uniform Sign Code, slow reference navigation, limited neon knowledge, sheet metal concepts, or safety requirements.

The goal is to help candidates approach the Nevada C-6B Sign Contractor examination with stronger code familiarity, improved navigation skills, better trade knowledge, and a more structured study routine without guaranteeing a passing score or licensing approval.

How many questions are on the Nevada C-6B Sign Contractor exam?

The Nevada C-6B Sign Contractor examination contains 50 questions.

How much time is allowed for the C-6B examination?

Candidates are allowed 2 hours to complete the examination.

How many correct answers are required to pass?

Candidates must answer 35 questions correctly to pass the Nevada C-6B examination.

Is the Nevada C-6B Sign Contractor exam open book?

Yes. The Nevada C-6B Sign Contractor examination is an open-book test.

Which books are allowed into the C-6B exam?

The NFPA 70 - National Electrical Code, 2017 and Uniform Sign Code, 1997 are the exam-room-approved references included in this package.

Does this package include Neon Techniques?

No. This package focuses specifically on the books allowed into the Nevada C-6B examination.

Does this package include OSHA 29 CFR Part 1926?

No. OSHA 29 CFR Part 1926 is a study-only reference and is not included in this books-allowed-into-exam package.

Does this package include Sheet Metal, 2nd Edition?

No. Sheet Metal, 2nd Edition is a study-only reference and is not included in this exam-room-focused package.

What is the largest subject on the C-6B exam?

Uniform Sign Code is the largest examination category with 15 questions.

How many National Electrical Code questions are on the exam?

The National Electrical Code accounts for 13 questions.

How many neon questions are on the examination?

Neon accounts for 10 questions.

Does the exam include sheet metal?

Yes. Sheet Metal accounts for 6 questions.

Does the exam include safety?

Yes. Safety accounts for 6 questions.

What work does the Nevada C-6B classification cover?

The C-6B classification covers fabrication, installation, and erection of electrical signs and installation of related wiring.

Should I practice with both books before test day?

Yes. Regular practice with both references can help candidates determine which book applies to a question and locate information more efficiently during the open-book examination.

Does this package guarantee that I will pass the Nevada C-6B exam?

No. This package provides the exam-room-approved references designed to support organized preparation. Examination results depend on each candidate's experience, sign-industry knowledge, study, code-navigation skills, and performance on test day.