North Carolina Marine Construction Contractor Exam Books & Course Rental

Prepare for the North Carolina Marine Construction Contractor examination with a complete ten-book rental package and a structured trade self-study course. This package combines three exam-room-approved references with seven additional study-only books covering marine construction, coastal development, construction equipment, concrete, reinforcing steel, dock construction, erosion and sedimentation control, contractor business law, licensing regulations, and related trade subjects.

All ten rental books are professionally highlighted and tabbed before shipment. Highlighting directs attention to important safety requirements, coastal-development provisions, construction methods, equipment topics, concrete procedures, reinforcing-steel practices, erosion-control requirements, business provisions, and state contractor regulations. Permanent tabs organize each reference into practical sections so candidates can build an efficient and consistent study routine.

The North Carolina Marine Construction Contractor examination requires knowledge of construction performed in coastal, shoreline, waterfront, and water-related environments. Candidates may need to understand marine foundations, docks, piers, bulkheads, seawalls, coastal permitting concepts, equipment selection, concrete construction, reinforcing steel, erosion control, workplace safety, project planning, and contractor responsibilities.

The three exam-room-approved rental books included in this package are the North Carolina Occupational Safety and Health Standards for the Construction Industry, with the latest available amendments; CAMA Handbook for Development of Coastal North Carolina, 2007; and Construction Planning, Equipment, and Methods, 10th Edition. These references are professionally highlighted and tabbed for open-book exam preparation and exam-room use.

The seven additional rental books are included for study purposes only and are not allowed inside the examination room. These references support broader preparation in sedimentation control, concrete technology, dock construction, reinforcing steel, contractor business law, licensing requirements, and North Carolina general contracting regulations.

The included trade self-study course provides 6 months of course access. Students can review marine construction topics, work through trade-focused lessons, study the complete rental library, and complete timed reference-navigation exercises using the three books permitted inside the examination center.

Please allow 15 business days for professional highlighting and tabbing before shipment. The package price is $1,290, plus a refundable $500 rental-book deposit, for a total initial payment of $1,790. The $500 deposit is refundable when the complete ten-book rental set is returned in similar condition within six months from the date the books are received.

Exam Details

The North Carolina Marine Construction Contractor examination is part of the licensing process for contractors seeking to qualify in the Marine Construction specialty classification. Candidates must complete the applicable application or examination-request process and receive authorization before scheduling the examination.

The examination focuses on trade knowledge associated with marine and coastal construction. Preparation may include docks, piers, wharves, bulkheads, seawalls, marine foundations, piles, concrete construction, reinforcing steel, coastal-development requirements, equipment, excavation, erosion control, safety, project planning, and contractor regulations.

Marine construction work often involves challenging jobsite conditions, including tidal activity, unstable soils, water exposure, limited access, heavy equipment, suspended loads, pile-driving operations, excavation, and environmentally sensitive areas. Candidates should understand both technical construction methods and the safety practices required for this type of work.

The exam-room-approved references in this package support three major preparation areas. The North Carolina safety standards address workplace hazards and construction safety. The CAMA Handbook supports coastal-development and permitting topics. Construction Planning, Equipment, and Methods supports equipment selection, production planning, earthwork, pile operations, concrete construction, and general construction methods.

The seven study-only books expand preparation in concrete mixtures, reinforcing steel, dock construction, sedimentation control, contractor business law, and state licensing regulations. Although these books are not allowed in the exam room, they provide valuable background knowledge for understanding the trade.

Open Book Test

The North Carolina Marine Construction Contractor examination is an open-book test. Only the three references identified in the Exam Room Approved Books section are included for use inside the examination center. The remaining seven rental books are study-only references and are not allowed in the exam room.

The North Carolina Occupational Safety and Health Standards for the Construction Industry supports questions involving personal protective equipment, excavation, ladders, scaffolds, cranes, rigging, material handling, pile-driving operations, fall protection, electrical hazards, respiratory protection, equipment safety, and general construction-site requirements.

The CAMA Handbook for Development of Coastal North Carolina, 2007 supports preparation involving coastal areas, regulated development, shoreline projects, docks, piers, bulkheads, permitting concepts, environmental considerations, and development restrictions in coastal locations.

Construction Planning, Equipment, and Methods, 10th Edition supports questions involving project planning, equipment selection, earthmoving, excavation, pile driving, concrete operations, production rates, construction methods, jobsite logistics, and field operations.

The seven study-only books should be used throughout the six-month preparation period to strengthen technical understanding. Candidates should then complete timed exam-navigation practice using only the three approved books so the study process reflects the conditions of the actual examination.

Approved references must comply with the testing center’s book-use requirements. Permanent tabs should be securely attached to the pages. Temporary page flags, removable markers, loose papers, and unbound supplemental materials should not be taken into the examination room.

Efficient open-book testing depends on familiarity with the references. Candidates should know which book applies to each subject and where major sections, tables, definitions, diagrams, and procedures are located. The highlighted and tabbed format supports this preparation, but repeated use is essential.

Licensing Steps

1. Select the Marine Construction specialty classification. Confirm that the classification matches the coastal, shoreline, waterfront, dock, pier, bulkhead, seawall, and related work the business plans to perform.
2. Choose the appropriate license limitation. Select a limitation that corresponds with the applicant’s financial qualifications and anticipated project values.
3. Identify the qualifier. Designate the individual whose accepted examination will support the requested Marine Construction classification.
4. Gather the required application information. Organize business, ownership, qualifier, financial, and background information for the filing.
5. Submit the applicable application materials. Complete the required licensing or examination-request process.
6. Receive examination authorization. Follow the instructions provided for registration and scheduling.
7. Begin the self-study course. Use the six-month course-access period to review marine construction, safety, coastal development, equipment, concrete, reinforcement, docks, erosion control, business law, and licensing topics.
8. Study the complete rental library. Use all ten books to build technical, safety, regulatory, and business knowledge.
9. Practice with approved references. Complete timed navigation exercises using only the three books allowed inside the examination room.
10. Schedule and take the examination. Bring the required identification and only the approved exam-room references.
11. Complete remaining licensing requirements. Passing the examination satisfies the testing component, but the licensing authority must approve the complete application before issuing a license.
12. Return the complete rental set. Return all ten books in similar condition within six months from the date received to qualify for the refundable $500 deposit.

Passing the examination does not independently authorize an individual or business to perform licensed contracting work. The applicant or business entity must receive and maintain the appropriate North Carolina contractor license.

State Requirements

The North Carolina Marine Construction specialty classification applies to construction associated with marine, coastal, shoreline, and water-related environments. Covered work may include docks, piers, wharves, bulkheads, seawalls, marine foundations, and other structures built in or near water.

Marine construction projects may involve pile installation, concrete placement, reinforcing steel, excavation, shoreline stabilization, decking, framing, access structures, equipment operation, and coordination with coastal-development requirements.

The classification identifies the type of work the licensed contractor may perform. The license limitation determines the monetary value of projects the contractor may undertake. Applicants should select both according to the company’s planned work, financial qualifications, and expected project values.

Marine contractors must also comply with applicable permits, environmental rules, coastal-development requirements, erosion and sedimentation-control provisions, workplace-safety standards, project plans, engineering specifications, inspections, and local requirements.

Coastal and waterfront projects may require approvals beyond the contractor license. The exact requirements can depend on project location, water access, shoreline conditions, environmental impacts, structure type, and local jurisdiction.

Contractors should also maintain proper project records, contracts, insurance, safety programs, equipment procedures, and quality-control practices. These responsibilities support professional operations and help reduce risk on complex marine construction projects.

Reference Books

• Included Rental Book: North Carolina Occupational Safety and Health Standards for the Construction Industry, with Latest Available Amendments
  This exam-room-approved reference contains construction safety requirements involving cranes, rigging, excavation, pile driving, ladders, scaffolds, fall protection, personal protective equipment, electrical hazards, equipment, material handling, and general jobsite safety.
• Included Rental Book: CAMA Handbook for Development of Coastal North Carolina, 2007
  This exam-room-approved reference supports preparation involving coastal development, regulated areas, shoreline projects, docks, piers, bulkheads, environmental considerations, and coastal permitting concepts.
• Included Rental Book: Construction Planning, Equipment, and Methods, 10th Edition
  This exam-room-approved reference covers project planning, construction equipment, earthmoving, excavation, pile driving, concrete operations, production, field methods, and construction sequencing.
• Included Rental Book: North Carolina Administrative Code, Title 15A, Chapter 4 Sedimentation Control, Including the Latest Amendments
  This study-only reference supports preparation involving sedimentation-control requirements, plans, responsibilities, administration, enforcement, and protection of disturbed areas. It is not allowed inside the examination room.
• Included Rental Book: North Carolina General Statutes Chapter 113A, Article 4 Sedimentation Pollution Control Act of 1973
  This study-only reference supports review of North Carolina statutory requirements related to sedimentation pollution and land-disturbing activity. It is not allowed inside the examination room.
• Included Rental Book: Design and Control of Concrete Mixtures, 17th Edition
  This study-only reference covers concrete materials, mixture proportioning, durability, placement, curing, testing, quality control, and performance. It is not allowed inside the examination room.
• Included Rental Book: Dock Manual, Design, Building, Maintaining
  This study-only trade reference supports preparation involving dock planning, layout, structural components, materials, piles, decking, connections, maintenance, and waterfront construction practices. It is not allowed inside the examination room.
• Included Rental Book: Contractor’s Guide to Business, Law and Project Management - North Carolina General Contractors Edition, 10th Edition
  This study-only reference covers contractor licensing, business organization, contracts, estimating, project management, insurance, financial administration, liens, and professional responsibilities. It is not allowed inside the examination room.
• Included Rental Book: Placing Reinforcing Bars
  This study-only reference supports preparation involving reinforcing-bar identification, storage, handling, placement, supports, ties, splices, clearances, and field practices. It is not allowed inside the examination room.
• Included Rental Book: Laws and Regulations Applicable to General Contracting in the State of North Carolina
  This study-only reference supports review of North Carolina contractor laws, licensing regulations, classifications, limitations, responsibilities, and compliance requirements. It is not allowed inside the examination room.

Exam Room Approved Books

Only the following three professionally highlighted and tabbed rental books are identified for use inside the North Carolina Marine Construction Contractor examination room:

• North Carolina Occupational Safety and Health Standards for the Construction Industry, with Latest Available Amendments
  Use this reference for construction safety, equipment, cranes, rigging, pile driving, excavation, fall protection, ladders, scaffolds, electrical hazards, personal protective equipment, and material handling.
• CAMA Handbook for Development of Coastal North Carolina, 2007
  Use this reference for coastal development, shoreline projects, docks, piers, bulkheads, regulated areas, permitting concepts, and environmental considerations.
• Construction Planning, Equipment, and Methods, 10th Edition
  Use this reference for equipment selection, construction planning, earthwork, excavation, piles, concrete operations, production methods, and jobsite procedures.

The seven remaining rental books are study-only references and should not be taken into the examination center.

Test Information and Study Materials

The trade self-study course provides 6 months of course access. Begin with marine construction fundamentals, including docks, piers, bulkheads, seawalls, piles, framing, decking, concrete, reinforcing steel, shoreline conditions, and construction performed in or near water.

Continue with construction planning and equipment. Review equipment selection, access, production, lifting, excavation, pile driving, material handling, concrete placement, and jobsite logistics. Marine work often requires careful coordination because of water, tides, limited access, and environmental restrictions.

Safety preparation should include cranes, rigging, suspended loads, pile-driving equipment, fall protection, personal flotation devices when applicable, excavation, electrical exposure, ladders, scaffolds, personal protective equipment, and safe equipment operation.

Use the concrete and reinforcing-steel books to study mixture properties, durability, curing, reinforcement placement, clearances, splices, supports, and field-quality practices. Marine environments can place additional demands on concrete and reinforcing materials.

Study erosion and sedimentation-control requirements, especially for land-disturbing activity near coastal waters. Review stabilization, sediment barriers, runoff management, construction entrances, maintenance, inspections, and protection of adjacent areas.

Complete timed reference-navigation drills with only the three exam-room-approved books. Read each question, identify the subject, choose the correct reference, locate the applicable permanent tab, and confirm the answer from the relevant section, table, diagram, or procedure.

How 1 Exam Prep Helps You Reach Your Goal

1 Exam Prep supports students through organized study guidance, trade-focused review, practice-oriented preparation, reference navigation, and a confidence-building study structure. This package combines a ten-book rental library with a self-study course designed around North Carolina marine construction topics.

The professionally highlighted and tabbed books reduce the work involved in creating an organized study system. Highlighting directs attention to important safety provisions, coastal-development topics, equipment methods, concrete principles, reinforcing-steel practices, dock-construction subjects, business requirements, and state regulations.

The clear separation between exam-room-approved and study-only references helps candidates prepare with the correct expectations. Students can use all ten books during the course while reserving timed exam-navigation practice for the three references permitted inside the testing center.

The six-month course period gives candidates time to review lessons, revisit difficult subjects, and become familiar with the approved books. Consistent practice can improve confidence when locating exact information under timed examination conditions.

No course or rental-book package guarantees a passing score, examination eligibility, licensing approval, or a specific outcome. Results depend on the candidate’s knowledge, qualifications, preparation, practical experience, reference familiarity, and examination performance.

Frequently Asked Questions

What is included in this rental package?

The package includes three exam-room-approved rental books, seven study-only rental books, professional highlighting and tabbing, and a Marine Construction Contractor self-study course with 6 months of course access.

How many rental books are included?

The complete rental set includes ten books.

Can all ten books be taken into the examination room?

No. Only the North Carolina safety standards, the CAMA Handbook, and Construction Planning, Equipment, and Methods are identified for exam-room use. The remaining seven books are study-only references.

What is the total initial payment?

The package price is $1,290, plus a refundable $500 rental-book deposit, for a total initial payment of $1,790.

How is the $500 deposit refunded?

The $500 deposit is refundable when the complete ten-book rental set is returned in similar condition within six months from the date the books are received.

Are all ten books highlighted and tabbed?

Yes. Every rental book in the complete set is professionally highlighted and tabbed.

How long is the course available?

The trade self-study course includes 6 months of course access.

How long can I keep the rental books?

The complete ten-book rental set must be returned within six months from the date the books are received to qualify for the deposit refund.

How long do the books take to prepare?

Please allow 15 business days for professional highlighting and tabbing before shipment.

Is the examination open book?

Yes. The North Carolina Marine Construction Contractor examination is open book, but only the three approved exam-room references may be used.

Does the course include live instruction?

No. This package includes trade self-study course preparation.

Does this package guarantee a passing score?

No. The package provides organized rental references and self-study preparation, but results depend on the candidate’s knowledge, preparation, experience, reference familiarity, and examination performance.