North Carolina Marine Construction Contractor Exam Ultimate Package

Prepare for the North Carolina Marine Construction Contractor examination and licensing process with an organized Ultimate package that combines ten professionally highlighted and tabbed rental books, live trade instruction, a comprehensive self-study course, and Application Service. This package is built for candidates who want technical marine-construction preparation, efficient open-book reference navigation, and structured support as they work toward a North Carolina contractor license.

Marine construction requires knowledge across several connected areas. Candidates may need to understand coastal development, docks, piers, bulkheads, seawalls, marine foundations, piles, concrete, reinforcing steel, construction equipment, erosion and sedimentation control, workplace safety, contractor business practices, and state licensing regulations. The combination of exam-room-approved and study-only references provides a broader preparation library for these subjects.

The package includes three rental books identified for use inside the examination room: North Carolina Occupational Safety and Health Standards for the Construction Industry, with the latest available amendments; CAMA Handbook for Development of Coastal North Carolina, 2007; and Construction Planning, Equipment, and Methods, 10th Edition.

Seven additional rental books are included as study materials but are not allowed inside the examination room. These references cover sedimentation control, concrete materials, dock design and maintenance, contractor business law, reinforcing-bar placement, and North Carolina general contracting laws and regulations.

All ten rental books are professionally highlighted and tabbed. Highlighting draws attention to important safety standards, coastal-development provisions, construction methods, technical procedures, definitions, diagrams, tables, business requirements, and licensing topics. Permanent tabs organize each reference into practical sections so candidates can develop a consistent method for locating information.

The package includes live trade classes and 1 year of course access. Live instruction provides guided review of important marine-construction subjects and study strategies. The self-study portion allows candidates to revisit lessons, strengthen difficult topics, and practice with the highlighted and tabbed references throughout the one-year access period.

Application Service is included with this Ultimate package. This service provides structured assistance with organizing and completing the North Carolina general contractor application process. Final application acceptance, examination eligibility, and license issuance are determined by the North Carolina Licensing Board for General Contractors.

Please allow 15 business days for professional highlighting and tabbing before shipment. The package price is $1,715, plus a refundable $500 rental-book deposit, for a total initial payment of $2,215. The $500 deposit is refundable when the complete ten-book rental set is returned in similar condition within one year from the date the books are received.

Exam Details

The North Carolina Marine Construction Contractor examination is part of the qualification process for contractors seeking the Marine Construction specialty classification. Examination eligibility is determined through the North Carolina Licensing Board for General Contractors, and approved candidates receive instructions for registering and scheduling through PSI.

The examination evaluates knowledge associated with construction performed in coastal, shoreline, waterfront, and water-related environments. Preparation should include docks, piers, bulkheads, seawalls, marine foundations, piles, concrete, reinforcing steel, construction equipment, coastal-development considerations, erosion control, workplace safety, and general contractor responsibilities.

Marine construction often involves difficult site conditions. Projects may be affected by water exposure, tides, unstable soils, limited access, heavy lifting, pile installation, suspended loads, excavation, environmental restrictions, and weather. Candidates should understand how construction planning, equipment selection, safety procedures, and material performance come together on marine projects.

The three exam-room-approved books support the primary areas of open-book reference preparation. The North Carolina safety standards address construction-site hazards and required protective measures. The CAMA Handbook addresses coastal-development concepts and regulated coastal work. Construction Planning, Equipment, and Methods supports project planning, equipment, earthwork, pile operations, concrete work, and field-production methods.

The seven study-only books expand preparation beyond the exam-room references. They support understanding of concrete mixtures, reinforcement placement, dock construction, sedimentation control, business management, contractor laws, and North Carolina licensing requirements.

Open Book Test

The North Carolina Marine Construction Contractor examination is an open-book test. Only the three books listed in the Exam Room Approved Books section are identified for use inside the examination room. The seven additional rental books are study-only resources and should not be brought into the testing center.

The North Carolina Occupational Safety and Health Standards for the Construction Industry supports preparation involving cranes, rigging, pile-driving operations, excavation, scaffolds, ladders, fall protection, electrical hazards, personal protective equipment, material handling, heavy equipment, tools, and general construction-site safety.

The CAMA Handbook for Development of Coastal North Carolina, 2007 supports preparation involving coastal development, shoreline projects, regulated areas, docks, piers, bulkheads, permitting concepts, environmental considerations, and development restrictions affecting coastal construction.

Construction Planning, Equipment, and Methods, 10th Edition supports preparation involving equipment selection, project planning, earthmoving, excavation, pile installation, concrete operations, productivity, construction sequencing, jobsite logistics, and field methods.

The approved books are professionally highlighted and tabbed to support repeated practice. Candidates should learn which reference applies to each subject and become familiar with the location of major chapters, diagrams, definitions, tables, and procedures.

Permanent tabs should be securely attached to the book pages. Candidates should follow the current testing-center rules for reference materials and avoid taking loose papers, temporary flags, removable markers, or unapproved supplemental materials into the examination room.

Open-book preparation should focus on both subject knowledge and navigation speed. The books are most useful when the candidate can identify the correct reference quickly and move directly to the applicable section without searching through unrelated chapters.

Licensing Steps

1. Select the Marine Construction classification. Confirm that the classification matches the coastal, shoreline, dock, pier, bulkhead, seawall, marine-foundation, and related construction work the business plans to perform.
2. Choose the appropriate license limitation. Select the limitation that matches the applicant’s financial qualifications and anticipated project values.
3. Identify the qualifier. Designate the individual whose accepted examination will support the requested Marine Construction classification.
4. Gather the required application information. Organize the applicant, ownership, qualifier, business, financial, and background information needed for the filing.
5. Use the included Application Service. Receive structured assistance with organizing and completing the North Carolina general contractor application process.
6. Submit the applicable licensing materials. Complete the current application or examination-request requirements established by the licensing board.
7. Receive examination eligibility. Approved candidates receive instructions for registration and scheduling through PSI.
8. Attend the live trade classes. Review marine construction, coastal development, equipment, piles, safety, concrete, reinforcement, docks, erosion control, and examination strategies.
9. Continue with self-study preparation. Use the one-year access period to revisit lessons, review difficult subjects, and complete practice activities.
10. Study the complete rental library. Use all ten books to strengthen trade, safety, regulatory, and business knowledge.
11. Practice with the approved references. Complete timed navigation exercises using only the three books permitted in the examination room.
12. Schedule and take the examination. Bring the required identification and the approved exam-room books in acceptable condition.
13. Complete the remaining licensing requirements. Passing the examination satisfies the testing component, but the board must approve the complete application before issuing a license.
14. Return the complete rental set. Return all ten books in similar condition within one year from the date received to qualify for the refundable $500 deposit.

Passing the examination does not independently authorize a person or business to perform licensed contracting work. The applicant or business entity must receive and maintain the appropriate North Carolina general contractor license.

State Requirements

The North Carolina Marine Construction specialty classification covers marine construction and repair work. This includes work associated with docks, piers, bulkheads, seawalls, marine foundations, and other structures constructed in or adjacent to water.

Marine projects may involve pile installation, concrete work, reinforcing steel, framing, decking, shoreline stabilization, excavation, material handling, access structures, and construction equipment. Contractors should ensure that their proposed work remains within the scope of the classification held by the licensed business.

The classification determines the type of construction activity a contractor may perform. The license limitation determines the maximum value of an individual project the contractor may undertake. North Carolina currently recognizes limited, intermediate, and unlimited license limitations, each with separate financial qualification requirements.

North Carolina law generally requires a general contractor license when the total value of covered construction work is $40,000 or more. The licensed entity must hold a classification appropriate for the work and a limitation sufficient for the value of the project.

The applicant must designate a qualifier whose accepted examination supports the Marine Construction classification. The qualifier demonstrates examination knowledge, while the contractor license is issued to the approved individual or business entity.

Marine contractors may also need to comply with coastal-development approvals, environmental requirements, erosion and sedimentation-control rules, workplace-safety standards, engineering plans, project specifications, inspections, and local requirements. A contractor license does not replace permits or approvals required for an individual project.

Reference Books

• Included Book: North Carolina Occupational Safety and Health Standards for the Construction Industry, with Latest Available Amendments
  This exam-room-approved rental reference addresses cranes, rigging, excavation, pile driving, ladders, scaffolds, fall protection, personal protective equipment, electrical hazards, tools, material handling, and general construction safety.
• Included Book: CAMA Handbook for Development of Coastal North Carolina, 2007
  This exam-room-approved rental reference supports preparation involving coastal development, regulated areas, shoreline projects, docks, piers, bulkheads, environmental considerations, and coastal permitting concepts.
• Included Book: Construction Planning, Equipment, and Methods, 10th Edition
  This exam-room-approved rental reference covers project planning, equipment selection, earthmoving, excavation, pile operations, concrete work, productivity, construction sequencing, and field methods.
• Included Book: North Carolina Administrative Code, Title 15A, Chapter 4 Sedimentation Control, Including the Latest Amendments
  This study-only rental reference supports preparation involving sedimentation-control requirements, plans, administration, enforcement, stabilization, runoff management, and protection of disturbed areas.
• Included Book: North Carolina General Statutes Chapter 113A, Article 4 Sedimentation Pollution Control Act of 1973
  This study-only rental reference supports review of the North Carolina statutory framework governing sedimentation pollution and land-disturbing activity.
• Included Book: Design and Control of Concrete Mixtures, 17th Edition
  This study-only rental reference covers concrete materials, mixture proportioning, placement, consolidation, curing, testing, durability, quality control, and performance.
• Included Book: Dock Manual, Design, Building, Maintaining
  This study-only rental reference supports preparation involving dock planning, structural components, piles, framing, decking, connections, materials, inspection, repair, and maintenance.
• Included Book: Contractor’s Guide to Business, Law and Project Management - North Carolina General Contractors Edition, 10th Edition
  This study-only rental reference covers contractor licensing, business organization, contracts, estimating, project administration, financial management, insurance, liens, and professional responsibilities.
• Included Book: Placing Reinforcing Bars
  This study-only rental reference supports preparation involving bar identification, storage, handling, placement, supports, ties, clearances, splices, drawings, and field practices.
• Included Book: Laws and Regulations Applicable to General Contracting in the State of North Carolina
  This study-only rental reference supports review of North Carolina contractor classifications, license limitations, legal responsibilities, board regulations, and compliance requirements.

All ten books remain rental property. The complete rental set must be returned in similar condition within one year from the date the books are received for the $500 deposit to be refundable.

Exam Room Approved Books

Only the following three professionally highlighted and tabbed rental references are identified for use inside the North Carolina Marine Construction Contractor examination room:

• North Carolina Occupational Safety and Health Standards for the Construction Industry, with Latest Available Amendments
  Use this reference for cranes, rigging, excavation, pile driving, fall protection, ladders, scaffolds, equipment, personal protective equipment, electrical hazards, and general jobsite safety.
• CAMA Handbook for Development of Coastal North Carolina, 2007
  Use this reference for coastal development, regulated areas, shoreline work, docks, piers, bulkheads, environmental considerations, and permitting concepts.
• Construction Planning, Equipment, and Methods, 10th Edition
  Use this reference for planning, equipment, productivity, excavation, earthmoving, pile installation, concrete operations, construction sequencing, and field methods.

The remaining seven rental books are study-only references and should not be taken into the examination center.

Test Information and Study Materials

This Ultimate package includes live trade classes and 1 year of course access. Candidates can combine guided instruction with independent study and repeated practice using the complete highlighted and tabbed rental library.

Begin with marine construction fundamentals, including docks, piers, bulkheads, seawalls, piles, foundations, framing, decking, concrete, reinforcing steel, shoreline conditions, and construction performed in or near water.

Construction-planning study should include equipment selection, jobsite access, lifting, earthmoving, excavation, pile installation, concrete placement, production planning, sequencing, maintenance, and coordination of workers and materials.

Safety preparation should address cranes, rigging, suspended loads, pile-driving equipment, fall protection, ladders, scaffolds, excavation, electrical hazards, personal protective equipment, material handling, and safe equipment operation.

Concrete review should include materials, mixture properties, placement, consolidation, curing, durability, testing, and quality control. Reinforcing-steel preparation should include bar identification, supports, ties, splices, clearances, and placement practices.

Erosion and sedimentation-control study should cover stabilization, sediment barriers, construction entrances, runoff management, slope protection, maintenance, inspections, and protection of nearby properties and coastal waters.

Timed reference-navigation drills should use only the three exam-room-approved books. Read each practice question, identify the subject, select the correct reference, locate the applicable tab, and confirm the answer from the relevant section, table, diagram, definition, or procedure.

How 1 Exam Prep Helps You Reach Your Goal

1 Exam Prep supports candidates through organized study guidance, live trade instruction, self-study review, practice-oriented preparation, reference navigation, and a confidence-building study structure. This Ultimate package combines the books, course access, and application support needed for a more organized preparation experience.

The professionally highlighted and tabbed rental books reduce the work involved in building a reference-navigation system. Highlighting directs attention to important coastal-development provisions, safety requirements, equipment methods, dock-construction concepts, concrete procedures, reinforcing-steel practices, erosion-control rules, business topics, and licensing regulations.

Live trade classes provide guided review of key marine-construction subjects and practical study strategies. The self-study course allows candidates to continue working through the material, revisit difficult topics, and practice with the books throughout the one-year access period.

Application Service provides support with organizing and completing the North Carolina contractor application process. It does not guarantee application approval, examination eligibility, license issuance, or any particular state decision.

No course, book package, or application service guarantees a passing examination score or licensing outcome. Results depend on the candidate’s knowledge, qualifications, experience, preparation, reference familiarity, and examination performance.

Frequently Asked Questions

What is included in the Ultimate package?

The package includes ten highlighted and tabbed rental books, live Marine Construction Contractor classes, 1 year of self-study course access, and Application Service.

How many rental books are included?

The complete rental set includes ten books: three exam-room-approved references and seven study-only references.

Can all ten books be taken into the examination room?

No. Only the North Carolina safety standards, CAMA Handbook for Development of Coastal North Carolina, and Construction Planning, Equipment, and Methods are identified for exam-room use.

What is the total initial payment?

The package price is $1,715, plus a refundable $500 rental-book deposit, for a total initial payment of $2,215.

How is the $500 deposit refunded?

The $500 deposit is refundable when the complete ten-book rental set is returned in similar condition within one year from the date the books are received.

How long is the course available?

The Ultimate package includes 1 year of course access.

Are live classes included?

Yes. The package includes live trade classes and self-study preparation.

Is Application Service included?

Yes. Application Service is included with this Ultimate package.

Are all ten books highlighted and tabbed?

Yes. Every rental book is professionally highlighted and tabbed before shipment.

How long do the books take to prepare?

Please allow 15 business days for professional highlighting and tabbing before shipment.

Is the examination open book?

Yes. The examination is open book, but only the three approved references may be used inside the examination room.

Does this package guarantee a passing score or license approval?

No. The package provides organized books, live and self-study preparation, and application support, but results depend on the candidate’s qualifications, knowledge, preparation, experience, reference familiarity, and examination performance.