The 1 Package: All-Inclusive Mississippi Lathing Plastering and Stucco Contractor Exam, Licensing & Business Setup Solution

Build your Mississippi contractor licensing plan with an all-inclusive package that combines exam preparation, highlighted and tabbed rental books, one year of course access, Application Service, business formation assistance, EIN filing, and contractor compliance guidance. The 1 Package is designed for candidates pursuing the Mississippi Lathing, Plastering and Stucco specialty contractor classification who want support that extends beyond studying for the trade examination.

The Mississippi Lathing, Plastering and Stucco trade covers work involving plaster, lath, drywall, stucco, surface preparation, application methods, base and finish coats, and related construction practices. Candidates preparing for the licensing examination also need familiarity with OSHA construction safety and the business and law subjects required as part of the Mississippi contractor licensing process.

This package brings those preparation needs together. The rental reference set includes Plastering Skills, 1984; Gypsum Construction Handbook, 7th Edition; Portland Cement Plaster (Stucco) Manual; Code of Federal Regulations - 29 CFR Part 1926 (OSHA); and NASCLA Contractor’s Guide to Business, Law and Project Management, Mississippi 6th Edition.

The rental books are highlighted and tabbed to support organized study and more efficient open-book reference navigation. Candidates can use the highlighting to focus on important technical material and use the tabs to move more quickly between major chapters and subject areas while preparing.

The 1 Package also includes one year of course access and Application Service, along with business setup services designed to help candidates establish the business structure needed to move forward professionally after completing the applicable licensing process.

The 1 Package is designed to connect exam preparation with the administrative and business steps involved in pursuing contractor licensure. Candidates receive structured study resources for the technical examination and Mississippi Law and Business Management requirement while also receiving services aimed at helping organize the application and business setup process.

Exam Details

The Mississippi Lathing, Plastering and Stucco Contractor trade examination is administered by PSI as part of the contractor licensing process associated with the Mississippi State Board of Contractors, commonly known as MSBOC. Lathing, Plastering and Stucco is identified by MSBOC as a specialty classification requiring a trade examination.

The current PSI examination outline lists 45 questions, a 120-minute time allowance, and a minimum passing score of 70%. A passing result requires 32 correct answers.

The published content outline divides the examination into seven subject areas. Safety includes 5 questions. Surface Preparation and Setup includes 10 questions. Drywall includes 5 questions. Stucco includes 5 questions. Application and Installation includes 8 questions. Base and Finish Coat includes 7 questions. Plaster and Lathe includes 5 questions.

Surface Preparation and Setup is the largest individual content category. Application and Installation and Base and Finish Coat also account for significant portions of the examination. Candidates should still prepare for every listed subject because the complete examination draws from all seven areas.

The examination can test practical trade knowledge as well as information found in the technical references. Candidates should understand materials, installation procedures, substrate preparation, gypsum construction, plastering methods, stucco systems, coats and finishes, lathing practices, and jobsite safety.

Open Book Test

The Mississippi Lathing, Plastering and Stucco Contractor examination is an open-book test. Candidates are responsible for bringing permitted reference materials to the examination center and following the current PSI requirements for preparing and using those references.

Approved references may be highlighted, underlined, and indexed before the examination. Permanent tabs may be used for indexing. Temporary removable tabs are not permitted. Approved examination references may not contain written notes or additional loose or attached papers.

The rental books in The 1 Package are highlighted and tabbed to support preparation and navigation. Candidates should use the prepared books throughout the study period so the organization of each reference, major topics, and navigation points become familiar before test day.

Open book does not mean every question should be researched from the beginning. Candidates have 120 minutes for 45 questions, so efficient reference use matters. Strong preparation combines trade knowledge with the ability to identify the correct book and locate information without spending unnecessary time searching.

Drywall and gypsum questions may point toward the Gypsum Construction Handbook. Stucco questions may require the Portland Cement Plaster (Stucco) Manual. Plastering and lathing questions can involve Plastering Skills, while construction safety questions may require 29 CFR Part 1926.

Licensing Steps

The Mississippi contractor licensing process begins with an application to the Mississippi State Board of Contractors. Applicants seeking the Lathing, Plastering and Stucco specialty classification must identify the requested classification and complete the application sections and supporting documentation applicable to their licensing situation.

The applicant designates a qualifying party who is responsible for completing required contractor examinations on behalf of the business. The qualifying party must have the relationship to the applicant required under MSBOC rules.

The contractor application is submitted to MSBOC before the required examinations are scheduled. MSBOC reviews the application and establishes examination eligibility. After eligibility is transmitted to PSI, the qualifying party can proceed with registration and scheduling.

Mississippi requires the Law and Business Management examination for contractors applying for commercial or residential licenses. Trade examinations are also required when the requested specialty classification has an examination requirement. Lathing, Plastering and Stucco is a test-required specialty classification.

The NASCLA Contractor’s Guide to Business, Law and Project Management, Mississippi 6th Edition included in this package supports preparation for the Mississippi Law and Business Management examination, while the remaining trade references support preparation for the Lathing, Plastering and Stucco examination.

After the applicable examinations have been passed, the application proceeds through MSBOC review. Licensing approval depends on completion of the applicable application, qualifying-party, financial, business, insurance, examination, and supporting-document requirements.

State Requirements

The Mississippi State Board of Contractors lists Lathing, Plastering and Stucco as a specialty classification associated with the Building Construction major classification. Applicants may apply directly for specialty classifications rather than holding the complete major classification when that approach fits the work they intend to perform.

The trade involves work associated with lath, plaster, drywall, stucco, and related construction systems. Exam preparation reflects this scope through questions covering surface preparation, drywall, stucco, application and installation, base and finish coats, plaster and lath, and construction safety.

Applicants must complete the MSBOC licensing application before becoming eligible to schedule required examinations. The application requires qualifying-party information and other documentation applicable to the contractor business and classification requested.

Mississippi also requires the Law and Business Management examination for applicable contractor applicants. Candidates pursuing Lathing, Plastering and Stucco should therefore prepare for both the specialty trade examination and the business and law requirement.

The 1 Package includes Application Service to assist with the licensing application component while candidates continue working through the examination preparation process. Business formation, EIN filing, and contractor compliance guidance are also included as part of the broader business setup solution.

Reference Books

• Included Book: Plastering Skills, 1984
  This highlighted and tabbed rental reference covers plastering materials, tools, lathing, preparation, application methods, coatings, finishing procedures, and practical plastering knowledge. It supports preparation for several areas of the trade examination.
• Included Book: Gypsum Construction Handbook, 7th Edition
  This highlighted and tabbed rental reference covers gypsum products and construction systems, including drywall materials, assemblies, installation practices, fastening, finishing, and related technical subjects.
• Included Book: Portland Cement Plaster (Stucco) Manual
  This highlighted and tabbed rental reference focuses on portland cement plaster and stucco construction, including materials, substrates, preparation, application, coats, curing, and finishing procedures.
• Included Book: Code of Federal Regulations - 29 CFR Part 1926 (OSHA)
  This highlighted and tabbed rental reference contains federal construction safety standards. Relevant subjects can include scaffolds, ladders, personal protective equipment, fall protection, tools, material handling, and other jobsite requirements.
• Included Book: NASCLA Contractor’s Guide to Business, Law and Project Management, Mississippi 6th Edition
  This rental reference supports preparation for the Mississippi Law and Business Management examination and covers contractor-focused licensing, business, legal, financial, project-management, employment, and risk-management subjects.

Exam Room Approved Books

The technical references identified for the Mississippi Lathing, Plastering and Stucco open-book trade examination include:

• Plastering Skills, 1984
  Reference for plastering, lathing, preparation, application, coatings, and finishing subjects.
• Gypsum Construction Handbook, 7th Edition
  Reference for drywall, gypsum materials, assemblies, installation, and finishing.
• Portland Cement Plaster (Stucco) Manual
  Reference for stucco materials, substrates, application, curing, coats, and finishing practices.
• Code of Federal Regulations - 29 CFR Part 1926 (OSHA)
  Reference for federal construction safety requirements applicable to the trade.

The NASCLA Contractor’s Guide to Business, Law and Project Management, Mississippi 6th Edition is included to support preparation for the separate Mississippi Law and Business Management examination.

Test Information and Study Materials

Preparation should begin with the published examination content outline. Surface Preparation and Setup accounts for 10 questions, making it the largest content area. Candidates should study substrates, surface conditions, preparation techniques, layout, setup, and factors that influence successful plaster, drywall, and stucco installation.

Application and Installation accounts for 8 questions. Review material handling, installation sequences, attachment methods, plaster application, drywall installation, lathing practices, and stucco procedures.

Base and Finish Coat accounts for 7 questions. Study coat functions, application sequence, curing considerations, surface preparation between coats, finishing methods, and common plaster and stucco terminology.

Drywall, Stucco, Safety, and Plaster and Lathe each account for 5 questions. Candidates should schedule dedicated review for each category. A balanced study plan can help prevent smaller content sections from becoming avoidable weaknesses.

Use the highlighted portions of the rental books as focused study points while reading enough surrounding material to understand the complete concept. The tabs can help candidates return to major subjects repeatedly during preparation.

Practice questions should also include reference navigation. Identify the topic, decide which book applies, use the index or tabs to reach the relevant area, and confirm why the answer is correct. This combines technical learning with open-book exam practice.

The package includes 1 year of course access, giving candidates an extended period to review technical subjects, strengthen weak areas, practice reference navigation, and prepare for the applicable examinations.

Rental Terms and Refundable Book Deposit

The Total Package Cost is $1,930. A $250 refundable book deposit is added, making the Total Due $2,180 — All-Inclusive, with no hidden fees.

The $250 book deposit is refundable when the books are returned within one year in similar condition. Candidates should keep the complete rental set together and take reasonable care of the books throughout the rental period.

The one-year rental return period aligns with the included one year of course access, allowing candidates to use the highlighted and tabbed books as part of an extended study plan.

Please allow up to 15 business days for The 1 Package book orders.

Business Setup and Contractor Support

The 1 Package extends beyond exam preparation by including business setup services for candidates who are building the operational foundation of their contracting company.

Business Formation (LLC or Corporation) provides assistance establishing the customer's business entity so the contracting company has a formal legal structure for operations. Choosing and establishing the appropriate entity is an important step for contractors planning to conduct business professionally.

EIN Filing with the IRS is included to assist with obtaining the Employer Identification Number for the business. An EIN can be used to open business bank accounts, manage taxes properly, hire employees, and operate the contracting business professionally.

Contractor Compliance Guidance provides assistance understanding compliance requirements relevant to Mississippi contractors so the business can be better organized for ongoing operations after licensing.

Application Service is also included with The 1 Package, connecting the licensing application process with exam preparation and business setup support in one comprehensive offering.

How 1 Exam Prep Helps You Reach Your Goal

1 Exam Prep helps Mississippi Lathing, Plastering and Stucco Contractor candidates organize the different pieces of contractor preparation into a more manageable process. The 1 Package combines highlighted and tabbed references, course access, application assistance, and business setup services instead of treating each step as an unrelated task.

Trade-focused study guidance helps candidates concentrate on surface preparation, drywall, stucco, application and installation, base and finish coats, plaster and lath, and OSHA safety. The highlighted and tabbed books support repeated review and more efficient navigation during preparation.

Practice-oriented preparation helps candidates learn how to interpret contractor exam questions, identify the applicable reference, research unfamiliar concepts, and strengthen areas that require additional study.

One year of course access provides time to revisit difficult subjects and continue building familiarity with both trade and business-law material. Candidates can combine course study with the physical rental references to develop a consistent preparation routine.

The included Application Service supports the licensing process, while business formation, EIN filing, and contractor compliance guidance help candidates address important business setup steps associated with operating professionally.

The goal of The 1 Package is to bring exam preparation, licensing assistance, and business setup support together in a single solution. Examination results and licensing approval remain dependent on the candidate's performance and satisfaction of applicable MSBOC requirements.

Is the Mississippi Lathing, Plastering and Stucco exam open book?

Yes. The trade examination is open book. Candidates are responsible for bringing permitted references that comply with PSI examination requirements.

Are the rental books highlighted and tabbed?

Yes. The rental references included in The 1 Package are highlighted and tabbed to support organized preparation and faster reference navigation.

How many questions are on the Lathing, Plastering and Stucco exam?

The current PSI outline lists 45 questions, a 120-minute time allowance, and a 70% minimum passing score.

How much course access is included?

The 1 Package includes 1 year of course access.

Is Application Service included?

Yes. Application Service is included as part of The 1 Package.

Does the package include business formation?

Yes. Business Formation assistance for an LLC or Corporation is included as part of the business setup services.

Is EIN filing included?

Yes. EIN Filing with the IRS is included to help establish the Employer Identification Number used for business banking, tax administration, hiring employees, and professional business operations.

Does the package include contractor compliance guidance?

Yes. Contractor Compliance Guidance is included to assist with understanding compliance considerations associated with operating a Mississippi contracting business.

Is the Mississippi Business and Law book included?

Yes. The package includes the NASCLA Contractor’s Guide to Business, Law and Project Management, Mississippi 6th Edition.

What is the total price?

The Total Package Cost is $1,930. A $250 refundable book deposit is added, making the Total Due $2,180 — All-Inclusive, with no hidden fees.

When is the $250 book deposit refundable?

The $250 book deposit is refundable when the books are returned within one year in similar condition.

How long should I allow for The 1 Package book order?

Please allow up to 15 business days for The 1 Package book orders.

Does The 1 Package guarantee a contractor license or passing exam score?

No. The package provides exam preparation resources, application assistance, and business setup support. Candidates remain responsible for passing required examinations and satisfying all applicable Mississippi State Board of Contractors licensing requirements.