Florida Plumbing Contractor Exam Complete Book Set - Trade Books

The Florida Plumbing Contractor Exam Complete Book Set - Trade Books package is designed for candidates preparing for the Florida Plumbing Contractor trade exam who need the listed references for organized study. This trade book set supports preparation across plumbing code, onsite sewage treatment and disposal systems, OSHA safety, plumbing math, pipefitting calculations, standpipe and hose systems, health care facility requirements, plumbing reference material, solar water and pool heating, mechanical code, accessibility provisions, residential code, and fuel gas code.

Plumbing contracting is a technical trade area that can involve sanitary drainage, water distribution, venting, fixtures, fuel gas piping, health care facility systems, onsite sewage systems, solar thermal systems, accessibility requirements, residential plumbing provisions, jobsite safety, calculations, and code compliance. Candidates preparing for the Florida Plumbing Contractor exam should study with the correct references and become familiar with how each book supports open book exam preparation.

This product is a trade book set. It includes Chapter 64E-6, Florida Administrative Code, Standards for Onsite Sewage Treatment and Disposal Systems, July 16, 2018; Code of Federal Regulations - 29 CFR Part 1926 (OSHA); Mathematics for Plumbers and Pipefitters, 8th Edition; 2019 NFPA 14 Standard for the Installation of Standpipe and Hose Systems; NFPA 99 Health Care Facilities, Chapter 3 and Chapter 5, Annex A and Annex C, 2021; Plumber’s Handbook Revised, 2018, 5th Edition; Solar Thermal Manual: Solar Water & Pool Heating Manual, 2006; Florida Building Code - Mechanical, 2023; Florida Building Code - Accessibility, 2023; Florida Building Code - Plumbing, 2023; Florida Building Code - Residential, 2023; and Florida Building Code - Fuel Gas, 2023.

The Florida Plumbing Contractor exam is an open book test. Open book testing allows candidates to use approved references during the exam, but it still requires preparation. Candidates must understand which reference applies to each question, how each book is organized, and how to locate information efficiently under timed conditions. This complete trade book set gives candidates the references needed to build that preparation routine.

What You Get

• Complete Plumbing Trade Book Set: A full set of listed references for Florida Plumbing Contractor trade exam preparation.
• Onsite Sewage Reference: Chapter 64E-6, Florida Administrative Code, Standards for Onsite Sewage Treatment and Disposal Systems, July 16, 2018.
• Safety Reference: Code of Federal Regulations - 29 CFR Part 1926 (OSHA).
• Math and Plumbing References: Mathematics for Plumbers and Pipefitters, 8th Edition and Plumber’s Handbook Revised, 2018, 5th Edition.
• NFPA References: 2019 NFPA 14 Standard for the Installation of Standpipe and Hose Systems and NFPA 99 Health Care Facilities, Chapter 3 and Chapter 5, Annex A and Annex C, 2021.
• Solar Thermal Reference: Solar Thermal Manual: Solar Water & Pool Heating Manual, 2006.
• Florida Code References: Florida Building Code - Mechanical, Florida Building Code - Accessibility, Florida Building Code - Plumbing, Florida Building Code - Residential, and Florida Building Code - Fuel Gas, 2023 editions.
• Open Book Study Support: References used to prepare for plumbing contractor exam topics and open book navigation.

Exam Details

The Florida Plumbing Contractor trade exam evaluates knowledge connected to plumbing systems, plumbing code, onsite sewage treatment and disposal systems, jobsite safety, plumbing mathematics, pipefitting calculations, standpipe and hose systems, health care facility systems, solar water and pool heating, mechanical code topics, accessibility provisions, residential plumbing requirements, fuel gas systems, and practical plumbing reference information. Candidates should prepare to answer questions using the listed references and should practice locating information throughout the full book set.

Chapter 64E-6, Florida Administrative Code, Standards for Onsite Sewage Treatment and Disposal Systems, July 16, 2018 supports preparation for onsite sewage treatment and disposal systems. Candidates may use this reference to study system standards, onsite disposal requirements, system components, installation concepts, maintenance topics, and Florida administrative requirements connected to onsite sewage systems.

Code of Federal Regulations - 29 CFR Part 1926 supports construction safety preparation. Plumbing work can involve excavation, trenching, confined areas, ladders, elevated work, tools, equipment, material handling, personal protective equipment, welding or cutting operations, and other jobsite hazards. OSHA preparation helps candidates understand how construction safety requirements apply to plumbing work.

Mathematics for Plumbers and Pipefitters, 8th Edition supports preparation for math used in plumbing and pipefitting work. Candidates should review measurements, fractions, decimals, percentages, angles, offsets, slopes, volumes, areas, pipe calculations, and trade-related problem solving. Plumbing exams may require candidates to combine code knowledge with calculation skills.

2019 NFPA 14 Standard for the Installation of Standpipe and Hose Systems supports preparation for standpipe and hose system requirements. Candidates should review system classifications, installation requirements, components, design considerations, hose connections, water supply concepts, and fire protection provisions connected to standpipe systems.

NFPA 99 Health Care Facilities, Chapter 3 and Chapter 5, Annex A and Annex C, 2021 supports preparation for health care facility system topics within the listed sections. Candidates should study terminology, medical gas and vacuum system concepts, explanatory annex material, and health care facility provisions relevant to plumbing and piping work.

Plumber’s Handbook Revised, 2018, 5th Edition supports practical plumbing preparation. Candidates may use this reference to study plumbing tools, pipe materials, fittings, valves, water supply, drainage, venting, calculations, installation practices, and field reference information commonly used in plumbing work.

Solar Thermal Manual: Solar Water & Pool Heating Manual, 2006 supports preparation for solar water heating and pool heating systems. Candidates should review solar thermal system components, collectors, piping, pumps, controls, installation concepts, system operation, and maintenance considerations.

Florida Building Code - Mechanical, 2023 supports preparation for mechanical provisions that may connect to plumbing work, including equipment, ventilation, combustion air, exhaust, and coordination with mechanical systems. Florida Building Code - Accessibility, 2023 supports preparation for accessibility requirements, fixture clearances, accessible toilet rooms, lavatories, drinking fountains, and accessible plumbing-related features.

Florida Building Code - Plumbing, 2023 is a central reference for plumbing contractor preparation. Candidates should study plumbing system requirements, fixtures, water heaters, water supply and distribution, sanitary drainage, vents, traps, storm drainage, materials, backflow prevention, indirect waste, special piping, and code compliance topics.

Florida Building Code - Residential, 2023 supports preparation for residential plumbing and construction requirements. Candidates should review residential plumbing provisions, dwelling-related requirements, fixtures, water distribution, drainage, venting, fuel gas coordination, and code topics that apply to residential plumbing work.

Florida Building Code - Fuel Gas, 2023 supports preparation for fuel gas piping, appliances, combustion air, venting, installation requirements, sizing concepts, safety provisions, and code compliance. Plumbing contractors may need to understand fuel gas requirements as part of trade exam preparation.

Open Book Test

The Florida Plumbing Contractor exam is an open book test. Candidates may use approved references during the examination, but the open book format still requires preparation. Candidates must understand which reference applies to each question and how to locate information efficiently while working within the exam time limit.

An onsite sewage question may point to Chapter 64E-6, Florida Administrative Code. A jobsite safety question may point to OSHA 29 CFR Part 1926. A math or pipefitting calculation question may point to Mathematics for Plumbers and Pipefitters. A standpipe and hose system question may point to NFPA 14. A health care facility question may point to the listed sections of NFPA 99.

A practical plumbing question may point to Plumber’s Handbook Revised. A solar water or pool heating question may point to Solar Thermal Manual. A mechanical coordination question may point to Florida Building Code - Mechanical. An accessibility question may point to Florida Building Code - Accessibility. A plumbing code question may point to Florida Building Code - Plumbing. A residential plumbing question may point to Florida Building Code - Residential. A fuel gas question may point to Florida Building Code - Fuel Gas.

Strong open book preparation includes reviewing tables of contents, indexes, definitions, chapters, diagrams, charts, tables, calculations, code sections, safety standards, system requirements, and installation provisions. Candidates should practice finding information in each reference before exam day.

Candidates should also practice identifying the subject of a question before searching. Random searching can waste valuable time. A stronger approach begins with reading the question carefully, identifying keywords, choosing the correct reference, using the index or table of contents, and confirming the answer directly in the book.

Open book testing rewards candidates who know how to use the references with purpose. Having the books is only the beginning. Candidates should build a study routine that includes reading key sections, solving practice problems, reviewing code topics, and repeatedly using the references to locate answers.

Candidates should follow current testing instructions for approved references, editions, binding, book condition, highlighting, tabs, labels, notes, and materials allowed into the exam room. Preparing with the references before exam day helps candidates build familiarity and confidence with the open book testing process.

Licensing Steps

Florida Plumbing Contractor candidates should begin by confirming the correct contractor classification and identifying the examination requirements connected to that license path. The trade exam is an important part of preparation, but licensing may also involve additional requirements depending on the candidate’s licensing process.

The next step is to study with the correct trade references. Candidates should use this complete book set to prepare for onsite sewage systems, OSHA safety, plumbing mathematics, pipefitting calculations, standpipe and hose systems, health care facility requirements, practical plumbing reference topics, solar thermal systems, mechanical code, accessibility code, plumbing code, residential code, and fuel gas code. Because the exam is open book, candidates should study the content and also practice reference navigation.

After preparing, candidates complete the application and scheduling process required for their exam path. On exam day, candidates should bring proper identification and follow testing center procedures. Reference materials may be inspected, so candidates should make sure their books comply with exam-room rules.

After passing the required exam sections, candidates continue with the applicable licensing process. Licensing may involve application review, experience documentation, business information, insurance, financial responsibility, background information, or other requirements connected to the classification. Passing an exam does not automatically issue a license. Candidates must complete the applicable licensing requirements.

State Requirements

The Florida Plumbing Contractor classification is connected to plumbing systems and related construction work. Candidates should prepare for trade knowledge involving plumbing code, onsite sewage systems, jobsite safety, plumbing mathematics, pipefitting calculations, standpipe systems, health care facility piping, solar water and pool heating, accessibility requirements, residential plumbing, mechanical coordination, and fuel gas systems.

State requirements may include examination, application review, experience, business documentation, financial responsibility, insurance, background information, and other licensing items. Candidates should prepare for both the exam process and the licensing process that follows.

This trade book set is designed to support the exam preparation phase by providing the listed references for study. Candidates should use the books throughout preparation and build a study plan that covers both practical plumbing knowledge and reference-based exam skills.

Reference Books

• Chapter 64E-6, Florida Administrative Code, Standards for Onsite Sewage Treatment and Disposal Systems, July 16, 2018
  A Florida administrative code reference used to study onsite sewage treatment and disposal system standards, system components, installation concepts, and regulatory requirements.
• Code of Federal Regulations - 29 CFR Part 1926 (OSHA)
  A construction safety reference covering OSHA requirements for jobsite safety, excavation, ladders, tools, equipment, personal protective equipment, material handling, and construction hazards.
• Mathematics for Plumbers and Pipefitters, 8th Edition
  A trade math reference covering measurements, fractions, decimals, percentages, angles, offsets, slopes, areas, volumes, pipe calculations, and plumbing-related problem solving.
• 2019 NFPA 14 Standard for the Installation of Standpipe and Hose Systems
  An NFPA reference used to study standpipe and hose system requirements, classifications, components, installation provisions, hose connections, and fire protection concepts.
• NFPA 99 Health Care Facilities, Chapter 3 and Chapter 5, Annex A and Annex C, 2021
  A health care facilities reference used to study terminology, system requirements, explanatory annex material, and health care facility provisions connected to plumbing and piping systems.
• Plumber’s Handbook Revised, 2018, 5th Ed.
  A practical plumbing reference covering plumbing tools, pipe materials, fittings, valves, water supply, drainage, venting, calculations, installation practices, and field reference information.
• Solar Thermal Manual: Solar Water & Pool Heating Manual, 2006
  A solar thermal reference used to study solar water heating, pool heating systems, collectors, pumps, piping, controls, installation concepts, system operation, and maintenance topics.
• Florida Building Code - Mechanical, 2023
  A mechanical code reference used to study mechanical system requirements, ventilation, exhaust, equipment installation, combustion air, and mechanical provisions that may coordinate with plumbing work.
• Florida Building Code - Accessibility, 2023
  An accessibility code reference used to study accessible plumbing fixtures, clearances, toilet rooms, lavatories, drinking fountains, routes, and accessibility requirements.
• Florida Building Code - Plumbing, 2023
  A plumbing code reference used to study fixtures, water heaters, water supply and distribution, sanitary drainage, vents, traps, storm drainage, materials, backflow prevention, and plumbing code provisions.
• Florida Building Code - Residential, 2023
  A residential code reference used to study dwelling-related plumbing requirements, residential water distribution, drainage, venting, fixtures, and residential construction provisions.
• Florida Building Code - Fuel Gas, 2023
  A fuel gas code reference used to study fuel gas piping, appliances, venting, combustion air, installation requirements, sizing concepts, safety provisions, and code compliance.

Exam Room Approved Books

The following references are included in this Florida Plumbing Contractor trade book set for exam preparation. Candidates should follow current exam instructions for approved references, editions, book condition, binding, tabs, labels, highlighting, notes, and materials allowed in the testing room.

• Chapter 64E-6, Florida Administrative Code, Standards for Onsite Sewage Treatment and Disposal Systems, July 16, 2018
• Code of Federal Regulations - 29 CFR Part 1926 (OSHA)
• Mathematics for Plumbers and Pipefitters, 8th Edition
• 2019 NFPA 14 Standard for the Installation of Standpipe and Hose Systems
• NFPA 99 Health Care Facilities, Chapter 3 and Chapter 5, Annex A and Annex C, 2021
• Plumber’s Handbook Revised, 2018, 5th Ed.
• Solar Thermal Manual: Solar Water & Pool Heating Manual, 2006
• Florida Building Code - Mechanical, 2023
• Florida Building Code - Accessibility, 2023
• Florida Building Code - Plumbing, 2023
• Florida Building Code - Residential, 2023
• Florida Building Code - Fuel Gas, 2023

Test Information and Study Materials

This Florida Plumbing Contractor trade book set helps candidates prepare with references used for open book study. The package covers several important areas of plumbing exam preparation, including onsite sewage treatment and disposal systems, OSHA safety, plumbing mathematics, pipefitting calculations, standpipe and hose systems, health care facility requirements, practical plumbing reference topics, solar thermal systems, mechanical code, accessibility code, plumbing code, residential code, and fuel gas code.

Plumbing code preparation should include Florida Building Code - Plumbing. Candidates should review water supply and distribution, sanitary drainage, venting, traps, fixtures, water heaters, storm drainage, indirect waste, backflow prevention, materials, special piping, and installation requirements. This reference is central to plumbing contractor exam preparation.

Residential preparation should include Florida Building Code - Residential. Candidates should review dwelling-related plumbing requirements, residential drainage and venting, water distribution, fixtures, fuel gas coordination, and residential construction provisions. Mechanical and fuel gas preparation should include Florida Building Code - Mechanical and Florida Building Code - Fuel Gas.

Accessibility preparation should include Florida Building Code - Accessibility. Candidates should review accessible plumbing fixtures, clearances, lavatories, toilet rooms, drinking fountains, accessible routes, and accessibility-related requirements that may apply to plumbing installations.

Math preparation should include Mathematics for Plumbers and Pipefitters. Candidates should practice trade calculations regularly, including measurements, slopes, offsets, volumes, areas, fractions, decimals, and pipe-related problem solving. Calculation practice should be paired with reference navigation so students can move between math and code topics efficiently.

NFPA preparation should include NFPA 14 and the listed sections of NFPA 99. Candidates should study standpipe and hose systems, health care facility terminology, medical gas and vacuum system concepts, and explanatory annex material connected to plumbing and piping work.

Onsite sewage preparation should include Chapter 64E-6, Florida Administrative Code. Solar thermal preparation should include Solar Thermal Manual: Solar Water & Pool Heating Manual. Practical plumbing review should include Plumber’s Handbook Revised. Safety preparation should include OSHA 29 CFR Part 1926.

Candidates should study by topic and by book. A strong study plan may include one section for plumbing code, one for onsite sewage systems, one for OSHA safety, one for plumbing math, one for standpipe systems, one for health care facilities, one for solar thermal systems, one for accessibility, one for residential plumbing, and one for fuel gas. Candidates should also practice locating information using tables of contents, indexes, headings, diagrams, charts, formulas, and code sections.

Reference practice should be repeated throughout the study process. Candidates should become comfortable moving through each book, recognizing important sections, and using the references with purpose. This trade book set gives candidates the listed references needed to support a structured preparation routine for the Florida Plumbing Contractor exam.

How 1 Exam Prep Helps You Reach Your Goal

1 Exam Prep helps Florida Plumbing Contractor candidates prepare with organized study guidance, trade-focused review, reference navigation support, and confidence-building study structure. This complete trade book set gives candidates the listed references needed to prepare directly with the materials connected to the exam.

The Florida Plumbing Contractor exam can feel challenging because the reference set covers several technical areas. Candidates must be ready for plumbing code, onsite sewage systems, OSHA safety, plumbing mathematics, standpipe systems, health care facility provisions, practical plumbing reference topics, solar thermal systems, accessibility requirements, residential plumbing, mechanical coordination, and fuel gas systems. 1 Exam Prep helps students approach the material with a clearer study plan and a stronger focus on reference-based preparation.

For open book exams, candidates need to know how to use the books. This book set supports that process by giving candidates the references needed to practice finding information, reviewing key topics, and building familiarity with the organization of each book. Repeated reference navigation helps candidates become more comfortable with the materials before exam day.

1 Exam Prep supports students through organized study guidance, trade-focused review, practice-oriented preparation, reference navigation when applicable, and confidence-building study structure. The goal is to help candidates prepare seriously and consistently for the Florida Plumbing Contractor exam.

1 Exam Prep does not guarantee passing scores, licensing approval, state approval, or exam outcomes. This trade book set is designed to support serious preparation through the correct references, organized study habits, and open book exam readiness.

FAQ Section

What is included in the Florida Plumbing Contractor Exam Complete Book Set?

This trade book set includes onsite sewage, OSHA, plumbing math, NFPA, plumber’s handbook, solar thermal, mechanical, accessibility, plumbing, residential, and fuel gas references for Florida Plumbing Contractor exam preparation.

Is this product an online course?

No. This product is the complete trade book set. Online courses may be available separately or as part of another package.

Is the Florida Plumbing Contractor exam open book?

Yes. The Florida Plumbing Contractor exam is an open book test using approved references. Candidates should practice using the books before exam day.

What topics should I study for the Florida Plumbing Contractor exam?

Candidates should study plumbing code, onsite sewage systems, OSHA safety, plumbing mathematics, standpipe systems, health care facility requirements, practical plumbing reference topics, solar thermal systems, accessibility, residential plumbing, mechanical coordination, and fuel gas code.

Why is Chapter 64E-6 included?

Chapter 64E-6 supports preparation for onsite sewage treatment and disposal system standards, system components, installation concepts, and Florida administrative requirements.

Why is Mathematics for Plumbers and Pipefitters included?

This reference supports plumbing math and pipefitting calculation preparation, including measurements, fractions, decimals, percentages, slopes, offsets, areas, volumes, and trade-related problem solving.

Why are NFPA references included?

NFPA 14 supports preparation for standpipe and hose systems. NFPA 99 supports preparation for health care facility system topics within the listed sections.

Why is the Solar Thermal Manual included?

The Solar Thermal Manual supports preparation for solar water heating and pool heating systems, including collectors, piping, pumps, controls, installation concepts, operation, and maintenance topics.

Why are Florida Building Code references included?

Florida Building Code references support preparation for plumbing, mechanical, accessibility, residential, and fuel gas code requirements that may apply to plumbing contractor work.

Does this book set include business and finance materials?

This product is the trade book set for Florida Plumbing Contractor exam preparation. Business and finance materials are not listed as included in this package.

Does this book set guarantee a passing score?

No. This book set does not guarantee a passing score or licensing approval. It provides the trade references used to support preparation for the Florida Plumbing Contractor exam.